AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Hartex Rubber Senior Engineer Interview Questions and Answers
Hartex Rubber Senior Engineer Interview Experiences
1 interview found
Anonymous
Selected
I applied via Referral and was interviewed before Aug 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Gd & T , Fits , Jigs & Fixtures
- Q2. About Tyre moulds , Design
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Recruitment Consultant and was interviewed before Dec 2018. There were 3 interview rounds.
Interview Questionnaire
11 Questions
- Q1. Phase in APQP, when submit PPAP
- Ans.
PPAP submission is the final phase of APQP.
PPAP submission is the final step in the APQP process.
It involves submitting a Production Part Approval Process (PPAP) to the customer.
PPAP includes documentation and samples that demonstrate the product meets customer requirements.
PPAP submission is necessary before production can begin.
PPAP submission is a critical step in ensuring product quality and customer satisfaction.
- Q2. Five phase in APQP, PPAP is submitted in 4th phase
- Ans.
APQP consists of five phases, with PPAP being submitted in the fourth phase.
APQP stands for Advanced Product Quality Planning.
The five phases of APQP are: Planning and Program Definition, Product Design and Development, Process Design and Development, Product and Process Validation, and Launch, Feedback, Assessment, and Corrective Action.
PPAP stands for Production Part Approval Process.
PPAP is submitted in the fourth p...
- Q3. How to make PPT
- Ans.
To make a PPT, use a software like PowerPoint or Google Slides and follow a structure with clear and concise content.
Choose a template or create your own design
Add relevant and visually appealing images
Use bullet points and short sentences
Practice your presentation before presenting
Include a conclusion and call to action
- Q4. How to do process audit
- Ans.
Process audit involves reviewing and evaluating a company's procedures and policies to ensure they are effective and efficient.
Identify the process to be audited
Define the audit objectives and scope
Select the audit team and assign roles
Gather and analyze data
Identify areas for improvement
Develop and implement corrective actions
Monitor and follow up on corrective actions
Document the audit findings and recommendations
- Q5. As per control plan
- Q6. What you do when a customer complaint
- Ans.
When a customer complaint arises, I listen attentively, empathize with their concerns, investigate the issue, propose a solution, and follow up to ensure satisfaction.
Listen attentively to the customer's complaint
Empathize with their concerns and show understanding
Investigate the issue by gathering relevant information
Propose a solution or offer alternatives to address the complaint
Follow up with the customer to ensure
- Q7. First I will take entrim action as well as I inform to my team & related department via mail or by face.
- Q8. How
- Ans.
Can you please clarify the question?
I'm sorry, I don't understand what you're asking.
Could you please rephrase the question?
I need more information to answer that question.
- Q9. First I depute someone at customer line then customer store, then warehouse if any, then our FG, then WIP & store if problem related to BOP part
- Q10. How & when to develop gauge & fixture during NPD
- Ans.
Gauges and fixtures should be developed during the design phase of NPD to ensure quality and efficiency.
Identify critical dimensions and tolerances early on
Develop gauges and fixtures to measure and verify these dimensions
Test and refine gauges and fixtures throughout the design process
Ensure gauges and fixtures are compatible with manufacturing processes
Finalize gauges and fixtures before production begins
- Q11. During 2nd phase, first I identify gauge or fixture required for which station, if there is inhouse facility then fix meeting for understanding concept to toolroom if not possible to meke inhouse than cal...
Interview Preparation Tips
Clean Nails or cutted properly.
Reach at interview sight 10 to 15 minutes before scheduled time.
Eye contact.
No any hesitation.
Switch off your mobile etc
I applied via Recruitment Consulltant and was interviewed in Jun 2022. There were 4 interview rounds.
(2 Questions)
- Q1. Technical knowledge about area
- Q2. English is required as fluent
Question abou TPM, OEE, six Sigma, lean manufacturing,kaizen,poka yoke etc
(1 Question)
- Q1. No sales discuss the directly give you ofer with hike of 30-40%
Interview Preparation Tips
Be confident
Share only you know very well.
Short but exactly answers the required in interview stories are no one like
Selected
I applied via Naukri.com and was interviewed in Aug 2023. There were 4 interview rounds.
(3 Questions)
- Q1. Tell me about yourself?
- Q2. Why do we hire you?
- Q3. What salary did you expect
(3 Questions)
- Q1. Tell me about your job profile? Roles Responsibilities.
- Q2. Tell be about manufacturing process which you have been seen in your career
- Q3. What are core tools of AIAG?
- Ans.
Core tools of AIAG include FMEA, PPAP, MSA, SPC, and APQP.
FMEA (Failure Mode and Effects Analysis) is used to identify and prioritize potential failure modes in a process.
PPAP (Production Part Approval Process) is used to ensure that suppliers meet customer requirements.
MSA (Measurement Systems Analysis) is used to assess the quality of measurement systems.
SPC (Statistical Process Control) is used to monitor and contro...
(3 Questions)
- Q1. What are yours failures?
- Ans.
I have experienced failures in project deadlines, communication, and technical solutions.
Missed project deadlines due to underestimating tasks
Miscommunication with team members leading to misunderstandings
Implemented technical solutions that did not meet requirements
- Q2. What are your achievements?
- Q3. What is heat treatment process
- Ans.
Heat treatment process is a method used to alter the physical and sometimes chemical properties of a material through heating and cooling.
Involves heating the material to a specific temperature
Holding it at that temperature for a set amount of time
Then cooling it at a controlled rate
Can be used to increase hardness, improve machinability, or enhance other properties
Common techniques include annealing, quenching, temper
Selected
I appeared for an interview in Apr 2023.
(1 Question)
- Q1. Why to choose this company
(1 Question)
- Q1. Previous company better then why to move
(1 Question)
- Q1. You know TQM knowledge
(1 Question)
- Q1. What is learned from fresher to 6 years experience during period
Interview Preparation Tips
Selected
I appeared for an interview before Feb 2024.
(3 Questions)
- Q1. What is your perspective on Daily Routine Management (DRM)?
- Ans.
Daily Routine Management (DRM) optimizes productivity by structuring daily tasks and priorities effectively.
Establishing clear goals: Setting daily, weekly, and monthly objectives helps maintain focus.
Time blocking: Allocating specific time slots for tasks can enhance concentration and efficiency.
Prioritization: Using methods like the Eisenhower Matrix to distinguish between urgent and important tasks.
Regular reviews: ...
- Q2. How do you address new process development, and what procedures do you follow?
- Ans.
I follow a structured approach to new process development, ensuring thorough analysis, testing, and implementation.
Conduct a needs assessment to identify the problem or opportunity for improvement.
Research existing processes and technologies to gather insights and best practices.
Develop a detailed project plan outlining objectives, timelines, and resources required.
Prototype the new process and conduct pilot testing to...
- Q3. What is the process for conducting a Process Failure Mode and Effects Analysis (PFMEA)?
- Ans.
PFMEA is a systematic approach to identify and mitigate potential process failures and their effects.
1. Define the scope: Identify the process to be analyzed, such as assembly or manufacturing.
2. Assemble a team: Include cross-functional members like engineers, quality, and production staff.
3. Identify potential failure modes: List ways the process could fail, e.g., incorrect assembly.
4. Determine effects of failures: ...
I applied via Referral and was interviewed in Jul 2021. There were 4 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Is any mnc company having vacancy
- Q2. Is this good company
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed before Sep 2023. There were 2 interview rounds.
Math electrical related
(2 Questions)
- Q1. Family question
- Q2. Job related and
(1 Question)
- Q1. Why you left your current company
(2 Questions)
- Q1. About quality tools & process atc
- Q2. 7qc took, paqcs, process
Interview Preparation Tips
I applied via Walk-in and was interviewed in Aug 2021. There were 5 interview rounds.
Interview Questionnaire
1 Question
- Q1. G code & M code , what is m29& it's benefits? Drill and tap program,hole dialing etc.
- Ans.
M29 is a G-code used to stop writing to an SD card or other storage device.
M29 is used to end a file when writing to an SD card or other storage device.
It ensures that all data is written and prevents corruption of the file.
It is commonly used in CNC machines for drilling and tapping programs.
It can also be used for hole dialing and other precision operations.
M29 is often used in conjunction with other G and M codes to
Interview Preparation Tips
Hartex Rubber Interview FAQs
Tell us how to improve this page.
Hartex Rubber Interviews By Designations
Interview Questions for Popular Designations
- Senior Software Engineer Interview Questions
- Senior Test Engineer Interview Questions
- Senior Systems Engineer Interview Questions
- Senior Data Engineer Interview Questions
- Senior Associate Interview Questions
- Senior Quality Engineer Interview Questions
- Senior Design Engineer Interview Questions
- Senior Executive Interview Questions
- Show more
Hartex Rubber Senior Engineer Interview Process
based on 1 interview
Interview experience
Senior Engineer Interview Questions from Similar Companies
Hartex Rubber Senior Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Assistant Manager
23
salaries
|  ₹4 L/yr - ₹7.5 L/yr |
|
Executive Accountant
19
salaries
| ₹1.6 L/yr - ₹3 L/yr |
|
Engineer
12
salaries
| ₹2.5 L/yr - ₹3.6 L/yr |
|
Senior Executive
7
salaries
| ₹3 L/yr - ₹4 L/yr |
|
Branch Manager
7
salaries
| ₹4.3 L/yr - ₹5.4 L/yr |
ZF Steering Gear
Ag Industries
Toyoda Gosei Minda
Global Autotech
- Home >
- Interviews >
- Hartex Rubber Interview Questions >
- Hartex Rubber Senior Engineer Interview Questions
