Upload Button Icon Add office photos

Gulf Contracting

Compare button icon Compare button icon Compare

Filter interviews by

Gulf Contracting Diploma Civil Engineer Interview Questions and Answers

Updated 14 Apr 2022

Gulf Contracting Diploma Civil Engineer Interview Experiences

1 interview found

I applied via Recruitment Consulltant and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Types of concrete and testing methods
  • Ans. 

    There are various types of concrete used in construction, and each type requires different testing methods.

    • Types of concrete include plain, reinforced, pre-stressed, lightweight, and high-strength.

    • Testing methods include slump test, compressive strength test, flexural strength test, and water absorption test.

    • Slump test measures the consistency of fresh concrete, compressive strength test measures the strength of harden...

  • Answered by AI
  • Q2. Prior to start excavation points to be considered
  • Q3. What is productivity & how u will achieve that
  • Q4. Points to be considered while rebar fixing
  • Ans. 

    Points to consider while rebar fixing

    • Ensure proper spacing and alignment of rebars as per design

    • Use appropriate binding wire to tie the rebars together

    • Ensure proper lap length of rebars as per design

    • Ensure proper cover to the rebars to prevent corrosion

    • Ensure proper anchorage of rebars at the ends

    • Ensure proper placement of rebars in beams, columns, slabs, etc.

    • Ensure proper curing of concrete after rebar fixing

  • Answered by AI
  • Q5. What items to be check during formwork inspection
  • Ans. 

    During formwork inspection, various items need to be checked to ensure safety and quality of the structure.

    • Check the formwork design and ensure it meets the specifications

    • Inspect the formwork materials for any damage or defects

    • Check the formwork supports and ensure they are stable and properly placed

    • Inspect the formwork ties and braces to ensure they are secure and properly placed

    • Check the formwork for proper alignment...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Gulf Contracting Diploma Civil Engineer interview:
  • Concreting procedures
  • Methods of fixing formwork
  • Rebar fixing precautions
Interview preparation tips for other job seekers - While facing interview don't be in inferior complex be bold and answer the questions

Interview questions from similar companies

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 

Interview Preparation Tips

Interview preparation tips for other job seekers - You have to prepare aptitude test and you should have good knowledge about your field

I applied via Walk-in and was interviewed in Apr 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. 1) Introduction 2) 5C components 3) GD and tolerance 4) Documentation

Interview Preparation Tips

Interview preparation tips for other job seekers - Read about Diesel engine and casting defects, learn about drawing reading.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is bar bending schedule
  • Ans. 

    Bar bending schedule is a document that provides details of reinforcement steel bars used in construction projects.

    • It includes details such as bar mark, bar size, quantity, shape, and bending dimensions.

    • Helps in estimating the quantity of steel required for construction.

    • Ensures proper placement and bending of reinforcement bars as per design specifications.

    • Used by contractors, engineers, and construction workers for re...

  • Answered by AI
  • Q2. 28 days concrete strength
  • Ans. 

    28 days concrete strength is the standard measure of concrete's compressive strength after 28 days of curing.

    • 28 days concrete strength is the standard measure of concrete's compressive strength after 28 days of curing

    • It is important for assessing the quality of concrete and its ability to support structural loads

    • The strength of concrete typically continues to increase beyond 28 days, but 28 days is the standard testing

  • Answered by AI
  • Q3. Difference between mivan and conventional
  • Ans. 

    Mivan is a modern construction technique using aluminum formwork, while conventional construction involves traditional methods like brick and mortar.

    • Mivan is faster and more efficient than conventional construction methods.

    • Mivan requires skilled labor for installation of aluminum formwork.

    • Conventional construction is more labor-intensive and time-consuming.

    • Mivan provides better quality finishes compared to conventional...

  • Answered by AI
  • Q4. What is self leveling concrete
  • Ans. 

    Self leveling concrete is a type of concrete that has a high flow consistency and is used to create smooth and level surfaces.

    • Self leveling concrete is designed to flow easily and settle into place without the need for troweling or leveling.

    • It is commonly used to level uneven floors before installing flooring materials such as tile or carpet.

    • Self leveling concrete can be applied in thicknesses ranging from a featheredg...

  • Answered by AI
  • Q5. How many days will take 1st Aluform mockup Concreting
  • Ans. 

    The 1st Aluform mockup concreting typically takes 1-2 days to complete.

    • 1-2 days is the usual timeframe for 1st Aluform mockup concreting

    • Factors such as weather conditions, size of the mockup, and availability of resources can affect the duration

    • Proper planning and coordination can help expedite the process

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Shimizu Senior Site Engineer interview:
  • Construction
  • Structural
  • Quality Control
  • Quality Assurance
  • Bar Bending Schedule
  • Project Execution
Interview preparation tips for other job seekers - Be active and action to learn every step and work hard and smart . Please ensure technical criticis and how it resolve it

I applied via Approached by Company and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Related to department

Interview Preparation Tips

Topics to prepare for Hyundai Engineering Civil Engineer interview:
  • Related to experience
Interview preparation tips for other job seekers - Please prepare professional cv related to work
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What is the basics concept used for construction of Substation from start to Finish
  • Ans. 

    The basic concept for construction of a substation involves site selection, design, equipment installation, and commissioning.

    • Site selection involves identifying a suitable location for the substation based on factors such as proximity to power sources and load centers.

    • Design involves creating a plan for the substation layout, including the placement of equipment such as transformers, switchgear, and control systems.

    • Eq...

  • Answered by AI
  • Q2. What is Single Line Diagram of Substation
  • Ans. 

    Single Line Diagram of Substation is a graphical representation of electrical distribution system in a substation.

    • It shows the electrical components and their connections in a simplified manner

    • It helps in understanding the flow of power and voltage levels in the system

    • It is used for planning, designing, and maintenance of the substation

    • It includes information about transformers, circuit breakers, busbars, and other equ...

  • Answered by AI
  • Q3. What is your strength
  • Q4. If the company not provide the payment timely to the contractor, then you will conveyance the contractor for the work

Interview Preparation Tips

Interview preparation tips for other job seekers - Just keep the confidence & positive attitude. Mostly technically & management questions are asked
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Self introduction
Round 3 - HR 

(1 Question)

  • Q1. Salary negotiation
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Not Selected

I applied via Newspaper Ad and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. About Carriageways, Service Roads and patchwork i.e pot Holes, slippage cracks i.e alligator crack, horizontal or vertical crack, Undulating surface,rain cut, Metals beam crash barrier,Gaurd Rail or Mild s...
Round 3 - Technical 

(3 Questions)

  • Q1. Checking level of the layer
  • Q2. Testing the field dry density of the bed like Sub Grade ,GSB,WMM, DBM or BC
  • Q3. Checking the road width

Interview Preparation Tips

Interview preparation tips for other job seekers - Sir I m very hardworker employee .
I m very panchtual for my job duty and going to site daily and prepare daily progress report and also prepare monthly progress report.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. About salary and benefits
Round 3 - One-on-one 

(4 Questions)

  • Q1. About my key activity and responsibility
  • Q2. Process of variation
  • Ans. 

    Process of variation involves documenting and analyzing changes in project scope, cost, or schedule.

    • Variations are changes to the original scope, cost, or schedule of a project

    • Variations must be documented and approved by the relevant parties

    • The impact of variations on project budget and timeline must be analyzed

    • Examples of variations include design changes, unforeseen site conditions, and client requests

  • Answered by AI
  • Q3. Details about TDS
  • Q4. Details about NS items

Interview Preparation Tips

Topics to prepare for The Louis Berger Group Billing Engineer interview:
  • Contact
  • Running bill
  • Escalations
  • Variation
  • Ns items

I applied via Walk-in and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. As attendance for “Mid Management level designation “ Just asks about my Experience. Not much Technical points highlighted except few Manager level Questions (general points not much technically projected)...

Interview Preparation Tips

Topics to prepare for VIKRAN Engineering & Exim Assistant Manager interview:
  • Nothing required.
Interview preparation tips for other job seekers - Just expecting less salary and having Good experience in the relevant field you can have JOB CONFIRMED easily.

Gulf Contracting Interview FAQs

How many rounds are there in Gulf Contracting Diploma Civil Engineer interview?
Gulf Contracting interview process usually has 1 rounds. The most common rounds in the Gulf Contracting interview process are Technical.
What are the top questions asked in Gulf Contracting Diploma Civil Engineer interview?

Some of the top questions asked at the Gulf Contracting Diploma Civil Engineer interview -

  1. What items to be check during formwork inspect...read more
  2. Points to be considered while rebar fix...read more
  3. Types of concrete and testing meth...read more

Tell us how to improve this page.

Gulf Contracting Diploma Civil Engineer Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

4.0

Salary

5.0

Job security

4.0

Company culture

4.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
HSE Officer
10 salaries
unlock blur

₹6.9 L/yr - ₹12 L/yr

Civil Engineer
8 salaries
unlock blur

₹5.8 L/yr - ₹15.9 L/yr

Assistant Quantity Surveyor
6 salaries
unlock blur

₹7.3 L/yr - ₹11 L/yr

Construction Management
4 salaries
unlock blur

₹18 L/yr - ₹36 L/yr

QA QC Engineer
4 salaries
unlock blur

₹10 L/yr - ₹16.5 L/yr

Explore more salaries
Compare Gulf Contracting with

ABCI Infrastructures

3.4
Compare

VIKRAN Engineering & Exim

4.0
Compare

The Louis Berger Group

4.3
Compare

Nesma & Partners

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview