Filter interviews by
I applied via Recruitment Consultant and was interviewed before Mar 2020. There were 3 interview rounds.
Log out tag out is a safety procedure used to ensure that dangerous machines are properly shut off and not restarted before maintenance is complete. Scaffolding safety involves proper setup and inspection of scaffolding to prevent falls and other accidents. Scaffolding color code is a system used to identify the load capacity of scaffolding.
Log out tag out involves locking and tagging machines to prevent accidental sta...
Critical lifting refers to the lifting of heavy loads that require special attention and safety measures.
Examples include lifting of heavy machinery, large equipment, construction materials, heavy vehicles, and oversized containers.
Critical lifting requires proper planning, risk assessment, and the use of appropriate lifting equipment and techniques.
It is important to ensure that the load is stable and balanced, and th...
Tandem lifting is a technique of lifting heavy loads using two or more cranes working in unison.
It involves coordination between multiple crane operators.
It is used for lifting loads that are too heavy for a single crane to handle.
Tandem lifting requires careful planning and risk assessment.
The load must be evenly distributed between the cranes to prevent instability.
Examples include lifting large machinery, bridge sec
Emergency evacuation procedure of Saudi Aramco facilities
Emergency alarms are sounded to alert personnel
Employees are trained to evacuate to designated assembly points
Emergency response teams are activated to assist in the evacuation process
Regular drills are conducted to ensure preparedness
Evacuation routes and assembly points are clearly marked and communicated to all personnel
ANSI is a standard that sets guidelines for personal protective equipment (PPE) to ensure safety in the workplace.
ANSI stands for American National Standards Institute
ANSI sets standards for PPE to ensure they meet safety requirements
ANSI standards cover a wide range of PPE, including helmets, gloves, eyewear, and more
Employers are responsible for providing ANSI-compliant PPE to their employees
ANSI standards are regula...
I applied via Naukri.com and was interviewed in Dec 2017. There were 4 interview rounds.
Experienced safety officer with a background in industrial safety protocols and emergency response procedures.
Over 5 years of experience in implementing safety measures in industrial settings
Proficient in conducting safety audits and inspections to ensure compliance with regulations
Skilled in developing and implementing safety training programs for employees
Strong knowledge of emergency response protocols and procedure...
Safety Officers are responsible for ensuring the safety of employees in the workplace by implementing safety protocols and procedures.
Develop and implement safety policies and procedures
Conduct regular safety inspections and audits
Investigate accidents and incidents to determine root causes
Provide safety training to employees
Ensure compliance with safety regulations and standards
Maintain safety records and reports
posted on 12 Jun 2020
I applied via Recruitment Consultant and was interviewed in Mar 2021. There were 2 interview rounds.
posted on 19 Jun 2021
I applied via Walk-in and was interviewed in Dec 2020. There was 1 interview round.
Safety policy is a set of guidelines and procedures designed to ensure the safety of employees and prevent accidents in the workplace.
Safety policy outlines the responsibilities of employees and management in maintaining a safe work environment.
It includes procedures for identifying and reporting hazards, conducting safety training, and responding to emergencies.
Examples of safety policies include wearing personal prot...
Emergency plan is a set of procedures and guidelines to be followed in case of an emergency or disaster.
It outlines the roles and responsibilities of individuals and teams during an emergency
It includes evacuation procedures, communication protocols, and emergency contacts
It should be regularly reviewed and updated to ensure its effectiveness
Examples include fire evacuation plans, severe weather plans, and active shoot
posted on 2 Nov 2021
I applied via Referral and was interviewed before Nov 2020. There was 1 interview round.
Height work safety involves implementing control measures to prevent falls and injuries.
Conducting a risk assessment before starting any work at height
Providing appropriate training and equipment for workers
Implementing a fall protection plan
Regularly inspecting equipment and ensuring it is in good condition
Establishing clear communication and emergency procedures
Examples of control measures include guardrails, safety ...
posted on 2 Nov 2021
I applied via Referral and was interviewed before Nov 2020. There was 1 interview round.
posted on 26 Dec 2021
I applied via Walk-in and was interviewed in Nov 2021. There was 1 interview round.
HIRA stands for Hazard Identification and Risk Assessment.
HIRA is a systematic process of identifying potential hazards and analyzing the associated risks.
It involves identifying the hazards, assessing the risks, and implementing control measures to mitigate the risks.
HIRA is an important tool for safety officers to ensure the safety of employees and the workplace.
Examples of hazards that can be identified through HIRA...
I'm sorry, but the question is not clear and seems to be incomplete.
Please provide more context or rephrase the question.
Without proper information, I cannot provide a relevant answer.
Kindly clarify the question so that I can assist you better.
LMR full from refers to a situation where the Land Mobile Radio system is at maximum capacity.
LMR full from means that the Land Mobile Radio system is unable to accommodate any more users or communications.
This can occur when all available channels or frequencies are in use.
It may result in communication delays or the inability to establish new connections.
LMR full from can impact the effectiveness of emergency respons...
Safety is the state of being protected from harm, danger, or injury.
Safety involves identifying and assessing potential hazards
It requires implementing measures to prevent or mitigate those hazards
It involves training and educating individuals on safe practices
Safety is a continuous process that requires ongoing evaluation and improvement
Examples of safety measures include wearing personal protective equipment, followi...
Shutting down work is a crucial safety measure to prevent accidents and ensure the well-being of workers.
Shutting down work may be necessary in case of an imminent danger or hazard that cannot be immediately controlled.
It is important to have clear protocols and procedures in place for shutting down work in different scenarios.
Examples of situations that may require work shutdown include gas leaks, chemical spills, str...
An accident is an unexpected and unintentional event that causes harm or damage.
Accidents can happen in any setting, including workplaces, homes, and on the road.
They can result in physical injuries, property damage, or both.
Accidents can be caused by human error, equipment failure, or environmental factors.
Examples of accidents include slips and falls, car crashes, and machinery malfunctions.
An incident is an unplanned event that results in injury, damage, or loss.
Incidents can occur in any workplace or environment
They can range from minor incidents such as slips and falls to major incidents such as explosions or fires
Incidents should be reported and investigated to prevent future occurrences
Proper safety measures and training can help prevent incidents from happening
I applied via Recruitment Consulltant and was interviewed in Apr 2024. There were 7 interview rounds.
Our aim zero accident
Increase culture of safety
Made work permit box
Devloped safety culture
Developing a safety culture on site involves leadership commitment, employee involvement, training, communication, and continuous improvement.
Leadership commitment to safety is crucial in setting the tone for the entire organization.
Encourage employee involvement in safety programs and decision-making processes.
Provide regular safety training to ensure employees are aware of potential hazards and how to mitigate them.
E...
Ensure safety at project mobilization by conducting thorough risk assessments, providing proper training, enforcing safety protocols, and maintaining clear communication.
Conduct comprehensive risk assessments before mobilization to identify potential hazards
Provide necessary safety training to all personnel involved in the project
Enforce strict adherence to safety protocols and regulations on-site
Maintain clear communi...
To ensure safety in confined spaces, proper training, equipment, communication, and monitoring are essential.
Provide thorough training on confined space entry procedures and hazards
Ensure workers have appropriate personal protective equipment (PPE)
Implement a permit system for entry into confined spaces
Maintain constant communication with workers inside the confined space
Regularly monitor air quality and other hazards ...
The maximum AC voltage allowed in a confined space is typically 50 volts, while the maximum DC voltage allowed is usually 120 volts.
Maximum AC voltage allowed in confined space is usually 50 volts
Maximum DC voltage allowed in confined space is typically 120 volts
Moderator of safety culture
based on 1 review
Rating in categories
Welding Inspector
4
salaries
| ₹1 L/yr - ₹7 L/yr |
Construction Management
3
salaries
| ₹25 L/yr - ₹25 L/yr |
Mechanical Engineer
3
salaries
| ₹8 L/yr - ₹16.5 L/yr |
Planning Engineer
3
salaries
| ₹14.6 L/yr - ₹18 L/yr |
Safety Officer
3
salaries
| ₹12 L/yr - ₹16.5 L/yr |
Larsen & Toubro Limited
L&T Construction
Tata Projects
Megha Engineering & Infrastructures