Upload Button Icon Add office photos

Filter interviews by

Grl Technologies Validation Engineer Interview Questions and Answers

Updated 2 Apr 2024

Grl Technologies Validation Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Basic concepts on validation methodologies

Interview Preparation Tips

Interview preparation tips for other job seekers - Get thorough with basic concepts

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is can and how does the protocol work?
  • Ans. 

    CAN is a protocol used for communication between electronic devices in vehicles.

    • CAN stands for Controller Area Network.

    • It is a serial communication protocol that allows multiple electronic control units (ECUs) to communicate with each other.

    • CAN uses a two-wire bus system, consisting of a CAN High (CANH) and a CAN Low (CANL) wire.

    • It employs a message-based communication scheme, where each message is identified by a uniq...

  • Answered by AI
  • Q2. What is can v and what is can p?
  • Ans. 

    CAN V and CAN P are two types of messages used in Controller Area Network (CAN) communication protocol.

    • CAN V stands for CAN Voltage and is used for transmitting data at a higher voltage level.

    • CAN P stands for CAN Protocol and is used for transmitting data at a lower voltage level.

    • CAN V is used for high-speed communication, while CAN P is used for low-speed communication.

    • CAN V is used for critical data transmission, whi...

  • Answered by AI
  • Q3. What do you know about uds?
  • Ans. 

    UDS stands for Unified Diagnostic Services, a protocol used in automotive electronics for communication between ECUs.

    • UDS is used for diagnostic communication between ECUs in vehicles

    • It is based on the ISO 14229 standard

    • UDS allows for diagnostic services such as reading and clearing fault codes, accessing sensor data, and performing tests

    • It uses a request-response mechanism, with the diagnostic tool sending a request an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare basics and have minimum knowledge on protocols

Skills evaluated in this interview

I applied via Naukri.com and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Technical 

(6 Questions)

  • Q1. What is the CSV? What is automation testing?
  • Ans. 

    CSV stands for Computer System Validation. Automation testing is the use of software to execute tests.

    • CSV is a process of ensuring that a computer-based system meets its intended requirements and is compliant with regulatory standards.

    • Automation testing involves using software tools to run tests automatically, reducing the need for manual testing.

    • CSV and automation testing are often used together to ensure that compute...

  • Answered by AI
  • Q2. Describe the GAMP guidelines, explain Gxp Project related bugs?
  • Q3. What is 21 CFR part 11?
  • Q4. How many categories of softwares ?
  • Ans. 

    There are several categories of software, including system software, application software, programming software, and malware.

    • System software

    • Application software

    • Programming software

    • Malware

  • Answered by AI
  • Q5. SDLC ? How many types of hardware?
  • Ans. 

    SDLC refers to the software development life cycle. There are various types of hardware such as input, output, storage, and processing devices.

    • SDLC is a process followed by software development teams to design, develop, and test software.

    • Hardware can be classified into four types: input devices (e.g. keyboard, mouse), output devices (e.g. monitor, printer), storage devices (e.g. hard disk, USB drive), and processing de...

  • Answered by AI
  • Q6. What are the testing tools?
  • Ans. 

    Testing tools are software applications used to automate and manage the testing process.

    • Automated testing tools like Selenium, Appium, and TestComplete

    • Performance testing tools like JMeter and LoadRunner

    • Bug tracking tools like JIRA and Bugzilla

    • Code coverage tools like JaCoCo and Cobertura

    • Continuous integration tools like Jenkins and Travis CI

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. Biodata? Experiance?
  • Q2. Expected CTC? Current CTC

Interview Preparation Tips

Topics to prepare for Cognizant Validation Engineer interview:
  • SAP,
  • Dms
  • CSV
Interview preparation tips for other job seekers - Be confident, what you know , what is your experience , just you stand on your confidence .

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Indraprastha Institute of Information Technology (IIIT), Delhi and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. What is your experience?
  • Q2. Why ICICI Bank?
  • Ans. 

    ICICI Bank is a leading financial institution known for its innovative products, customer-centric approach, and strong market presence.

    • ICICI Bank offers a wide range of financial products and services, including savings accounts, loans, and investment options.

    • The bank has a strong reputation for its customer service and digital banking solutions.

    • ICICI Bank has a widespread network of branches and ATMs, making it conven...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for ICICI Bank Validation Engineer interview:
  • Machine Learning

I applied via Walk-in and was interviewed in Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Work for in our industry process

Interview Preparation Tips

Interview preparation tips for other job seekers - Reliability testing, handling tool, maintance work processes

Interview Questionnaire 

2 Questions

  • Q1. Scada Protocols related
  • Q2. IEC 104, IEC 61850, modbus, DNP3
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Naukri.com and was interviewed in Jan 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is can and how does the protocol work?
  • Ans. 

    CAN is a protocol used for communication between electronic devices in vehicles.

    • CAN stands for Controller Area Network.

    • It is a serial communication protocol that allows multiple electronic control units (ECUs) to communicate with each other.

    • CAN uses a two-wire bus system, consisting of a CAN High (CANH) and a CAN Low (CANL) wire.

    • It employs a message-based communication scheme, where each message is identified by a uniq...

  • Answered by AI
  • Q2. What is can v and what is can p?
  • Ans. 

    CAN V and CAN P are two types of messages used in Controller Area Network (CAN) communication protocol.

    • CAN V stands for CAN Voltage and is used for transmitting data at a higher voltage level.

    • CAN P stands for CAN Protocol and is used for transmitting data at a lower voltage level.

    • CAN V is used for high-speed communication, while CAN P is used for low-speed communication.

    • CAN V is used for critical data transmission, whi...

  • Answered by AI
  • Q3. What do you know about uds?
  • Ans. 

    UDS stands for Unified Diagnostic Services, a protocol used in automotive electronics for communication between ECUs.

    • UDS is used for diagnostic communication between ECUs in vehicles

    • It is based on the ISO 14229 standard

    • UDS allows for diagnostic services such as reading and clearing fault codes, accessing sensor data, and performing tests

    • It uses a request-response mechanism, with the diagnostic tool sending a request an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare basics and have minimum knowledge on protocols

Skills evaluated in this interview

Interview Questionnaire 

2 Questions

  • Q1. Validation Process, explain what you did in your project.
  • Q2. How do you convenience your customer on validation required for the software purchased from third party which is already validated?

Interview Preparation Tips

Interview preparation tips for other job seekers - Now a days we have online interview.
Please prepare yourself with high speed internet and networking.
Try to be 5 or 10 mins before.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Indraprastha Institute of Information Technology (IIIT), Delhi and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. What is your experience?
  • Q2. Why ICICI Bank?
  • Ans. 

    ICICI Bank is a leading financial institution known for its innovative products, customer-centric approach, and strong market presence.

    • ICICI Bank offers a wide range of financial products and services, including savings accounts, loans, and investment options.

    • The bank has a strong reputation for its customer service and digital banking solutions.

    • ICICI Bank has a widespread network of branches and ATMs, making it conven...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for ICICI Bank Validation Engineer interview:
  • Machine Learning

I applied via Naukri.com and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Technical 

(6 Questions)

  • Q1. What is the CSV? What is automation testing?
  • Ans. 

    CSV stands for Computer System Validation. Automation testing is the use of software to execute tests.

    • CSV is a process of ensuring that a computer-based system meets its intended requirements and is compliant with regulatory standards.

    • Automation testing involves using software tools to run tests automatically, reducing the need for manual testing.

    • CSV and automation testing are often used together to ensure that compute...

  • Answered by AI
  • Q2. Describe the GAMP guidelines, explain Gxp Project related bugs?
  • Q3. What is 21 CFR part 11?
  • Q4. How many categories of softwares ?
  • Ans. 

    There are several categories of software, including system software, application software, programming software, and malware.

    • System software

    • Application software

    • Programming software

    • Malware

  • Answered by AI
  • Q5. SDLC ? How many types of hardware?
  • Ans. 

    SDLC refers to the software development life cycle. There are various types of hardware such as input, output, storage, and processing devices.

    • SDLC is a process followed by software development teams to design, develop, and test software.

    • Hardware can be classified into four types: input devices (e.g. keyboard, mouse), output devices (e.g. monitor, printer), storage devices (e.g. hard disk, USB drive), and processing de...

  • Answered by AI
  • Q6. What are the testing tools?
  • Ans. 

    Testing tools are software applications used to automate and manage the testing process.

    • Automated testing tools like Selenium, Appium, and TestComplete

    • Performance testing tools like JMeter and LoadRunner

    • Bug tracking tools like JIRA and Bugzilla

    • Code coverage tools like JaCoCo and Cobertura

    • Continuous integration tools like Jenkins and Travis CI

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. Biodata? Experiance?
  • Q2. Expected CTC? Current CTC

Interview Preparation Tips

Topics to prepare for Cognizant Validation Engineer interview:
  • SAP,
  • Dms
  • CSV
Interview preparation tips for other job seekers - Be confident, what you know , what is your experience , just you stand on your confidence .

Skills evaluated in this interview

Grl Technologies Interview FAQs

How many rounds are there in Grl Technologies Validation Engineer interview?
Grl Technologies interview process usually has 1 rounds. The most common rounds in the Grl Technologies interview process are Technical.

Tell us how to improve this page.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.2k Interviews
Accenture Interview Questions
3.9
 • 8k Interviews
Infosys Interview Questions
3.7
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.5k Interviews
Cognizant Interview Questions
3.8
 • 5.5k Interviews
Amazon Interview Questions
4.1
 • 4.9k Interviews
Capgemini Interview Questions
3.8
 • 4.7k Interviews
Tech Mahindra Interview Questions
3.6
 • 3.7k Interviews
HCLTech Interview Questions
3.5
 • 3.7k Interviews
Genpact Interview Questions
3.9
 • 3k Interviews
View all
IT Manager
4 salaries
unlock blur

₹9 L/yr - ₹9.8 L/yr

Explore more salaries
Compare Grl Technologies with

TCS

3.7
Compare

Accenture

3.9
Compare

Cognizant

3.8
Compare

Infosys

3.7
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview