i
Greaves Cotton
Filter interviews by
I applied via Job Fair and was interviewed before Jan 2023. There were 5 interview rounds.
My team dicusion with going onto work
In case of an emergency duty report, the supervisor should promptly assess the situation, gather necessary information, and take appropriate actions to ensure safety and resolve the emergency.
Assess the nature and severity of the emergency
Contact relevant personnel and authorities
Coordinate with team members and assign tasks
Implement emergency protocols and procedures
Monitor the situation and provide updates
Document th...
Time works refers to the process of tracking and managing the hours worked by employees.
Time works involves recording the start and end times of employees' shifts.
It also includes tracking any breaks or overtime hours.
Supervisors are responsible for ensuring accurate time works records.
Time works data is used for payroll calculations and monitoring employee attendance.
Examples of time works systems include time clocks,
Working safety divice quality
I applied via Company Website and was interviewed in Nov 2021. There was 1 interview round.
HIRA stands for Hazard Identification and Risk Assessment.
HIRA is a process used to identify potential hazards and assess the risks associated with them.
It involves identifying hazards, evaluating the likelihood and severity of potential consequences, and determining appropriate control measures.
HIRA is commonly used in industries such as construction, manufacturing, and oil and gas.
Examples of hazards that may be iden...
EMS stands for Energy Management System.
EMS is a computer-based system that helps manage energy consumption in buildings and facilities.
It monitors and controls energy usage, identifies areas of inefficiency, and suggests ways to improve energy efficiency.
EMS can be used in a variety of settings, including commercial buildings, hospitals, and industrial facilities.
Examples of EMS include building automation systems, li...
A transformer is an electrical device that transfers electrical energy from one circuit to another through electromagnetic induction.
Transformers are used to increase or decrease the voltage of an alternating current (AC) power supply.
They consist of two coils of wire, called the primary and secondary coils, wrapped around a magnetic core.
When an AC voltage is applied to the primary coil, it creates a magnetic field th...
APFC panel is used to improve power factor and reduce energy consumption.
APFC panel helps in maintaining a high power factor which reduces energy consumption and saves money.
It also helps in reducing voltage drops and improves the efficiency of electrical equipment.
APFC panel is especially useful in industries where there are a lot of inductive loads such as motors and transformers.
It monitors the power factor and auto...
Megger is used to measure insulation resistance in electrical systems.
To ensure the safety of electrical systems and prevent electrical hazards.
To detect any insulation breakdown or leakage in the system.
To identify any potential faults or defects in the system.
To comply with industry standards and regulations.
Examples: testing cables, transformers, motors, generators, etc.
A permit system is a set of procedures and documents required to ensure safety and compliance with regulations before starting a job.
Permit systems are used to control hazardous work activities.
They involve obtaining permits and following specific procedures before starting work.
Examples include hot work permits, confined space permits, and excavation permits.
Permit systems help prevent accidents and ensure compliance ...
A compressor is a mechanical device that increases the pressure of a gas by reducing its volume.
Compressors are used in various industries such as refrigeration, air conditioning, and gas processing.
They come in different types such as reciprocating, rotary, and centrifugal compressors.
Reciprocating compressors use pistons to compress gas, while rotary compressors use rotating impellers.
Centrifugal compressors use a ro...
Relays are used to control high voltage or current circuits using low voltage signals.
Relays provide electrical isolation between the control circuit and the load circuit.
They can switch high voltage or current circuits using low voltage signals.
Relays are used in applications such as motor control, lighting control, and power distribution.
They can also be used for safety functions such as emergency shutdowns.
Relays ar...
PM stands for Preventive Maintenance and RM stands for Reactive Maintenance.
PM is a scheduled maintenance activity that aims to prevent equipment failure.
RM is a maintenance activity that is performed after equipment failure.
PM is proactive while RM is reactive.
PM involves regular inspections, cleaning, and replacement of parts.
RM involves troubleshooting, repairing, and replacing faulty parts.
Examples of PM include ch...
posted on 31 Oct 2024
I applied via Naukri.com and was interviewed in Oct 2024. There were 2 interview rounds.
I applied via Campus Placement and was interviewed before Nov 2020. There were 4 interview rounds.
I applied via Walk-in and was interviewed before Dec 2020. There was 1 interview round.
I applied via Campus Placement and was interviewed before Sep 2021. There were 3 interview rounds.
Normal as u can solve your aptitude test
The primary tools for an electrician include pliers, wire strippers, screwdrivers, voltage testers, and power drills.
Pliers are used to grip and twist wires and other components.
Wire strippers are used to remove insulation from wires.
Screwdrivers are used to tighten or loosen screws.
Voltage testers are used to check if a circuit is live or not.
Power drills are used to drill holes and drive screws.
I applied via Walk-in and was interviewed before Nov 2020. There was 1 interview round.
A circuit breaker is an electrical switch that automatically interrupts the flow of current when it exceeds a certain limit.
It is used to protect electrical circuits from damage caused by overloading or short circuits.
It works by detecting the excess current and tripping the switch to break the circuit.
It can be reset manually or automatically depending on the type of circuit breaker.
Examples include thermal circuit br...
A contactor is an electrical switch used for switching an electrical circuit on or off.
It is used to control electric motors, lighting, heating, and other electrical loads.
It consists of a coil, contacts, and an enclosure.
The coil generates a magnetic field that pulls the contacts together to close the circuit.
Examples include HVAC systems, elevators, and industrial machinery.
Contactor ratings are based on the amount o...
MCB stands for Miniature Circuit Breaker. It is an electrical switch that automatically shuts off the electrical circuit during an overload or short circuit.
MCB is a type of circuit breaker that is commonly used in residential and commercial buildings.
It is designed to protect electrical circuits from damage caused by overloading or short circuits.
MCBs are available in different current ratings and can be easily replac...
A motor is a device that converts electrical energy into mechanical energy to produce motion.
Motors are used in various applications such as electric vehicles, industrial machinery, and household appliances.
There are different types of motors such as DC motors, AC motors, stepper motors, and servo motors.
The basic principle of a motor is the interaction between a magnetic field and an electric current.
Examples of motor...
A current transformer is a device that measures the current flowing in a circuit by producing a proportional current in its secondary winding.
Consists of a primary winding and a secondary winding
Primary winding is connected in series with the circuit carrying the current to be measured
Secondary winding is connected to a measuring instrument or protective relay
Produces a current in the secondary winding that is proporti...
posted on 15 Jul 2017
I was interviewed before Jul 2016.
I applied via Walk-in and was interviewed in Oct 2019. There were 6 interview rounds.
posted on 9 Dec 2021
I applied via Company Website and was interviewed before Dec 2020. There was 1 interview round.
There are various types of electrical motors and transformers, each with their own unique wiring diagrams.
Types of electrical motors include AC motors, DC motors, stepper motors, and servo motors.
Transformers can be step-up, step-down, isolation, autotransformers, etc.
Wiring diagrams vary depending on the specific motor or transformer being used.
AC motors typically have a capacitor and a start winding in their wiring d...
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Assistant Manager
225
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
86
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Production Associate
84
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Manager
67
salaries
| ₹0 L/yr - ₹0 L/yr |
Design Engineer
63
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Cummins
Mahindra & Mahindra
Tata Motors