Upload Button Icon Add office photos

Filter interviews by

Genus Power Infrastructures Site Supervisor, Site in Charge and Site Engineer Interview Questions and Answers

Updated 12 Jun 2021

Genus Power Infrastructures Site Supervisor, Site in Charge and Site Engineer Interview Experiences

1 interview found

I applied via Company Website and was interviewed in Dec 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Who many type meter?
  • Ans. 

    There are several types of meters used in various industries and applications.

    • There are different types of meters used for measuring electricity consumption, such as analog meters, digital meters, and smart meters.

    • Water meters are used to measure the amount of water consumed in residential, commercial, and industrial settings.

    • Gas meters are used to measure the volume of natural gas or propane consumed in households and...

  • Answered by AI
  • Q2. 11 kv laine two pole gep meter
  • Q3. 10 meter

Interview Preparation Tips

Interview preparation tips for other job seekers - Very wel to good

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Campus Placement

Round 1 - Technical 

(4 Questions)

  • Q1. What makes ac to dc
  • Ans. 

    AC is converted to DC using a rectifier circuit.

    • AC to DC conversion is done using a rectifier circuit, which converts alternating current (AC) to direct current (DC).

    • Rectifier circuits can be half-wave or full-wave, depending on the type of rectification needed.

    • Examples of rectifier circuits include diode rectifiers, bridge rectifiers, and voltage multiplier circuits.

  • Answered by AI
  • Q2. What's materials used for earthing
  • Ans. 

    Materials commonly used for earthing include copper, galvanized steel, and conductive concrete.

    • Copper rods

    • Galvanized steel rods

    • Conductive concrete

    • Earthing strips

    • Earthing plates

  • Answered by AI
  • Q3. Full form of MCBA
  • Ans. 

    MCBA stands for Master of Construction Business Administration.

    • MCBA is a postgraduate degree program that focuses on the business aspects of the construction industry.

    • It covers topics such as project management, finance, marketing, and strategic planning.

    • Example: John completed his MCBA to advance his career in construction management.

  • Answered by AI
  • Q4. What is the standard earthing voltage
  • Ans. 

    The standard earthing voltage is typically 0 volts.

    • Standard earthing voltage is usually 0 volts to ensure safety in electrical systems

    • Earthing voltage can vary depending on the specific requirements of the system

    • Proper earthing helps to prevent electrical shocks and equipment damage

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. How long you can join
  • Q2. As early as possible

Interview Preparation Tips

Topics to prepare for Blue Star Site Engineer interview:
  • Electrical Engineering
  • Mechanical
  • HVAC Engineering
  • Air Conditioning
Interview preparation tips for other job seekers - Read construction Site related questions
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. Earthing dimension
  • Q2. How many pole 1km cabling
  • Ans. 

    The number of pole 1km cabling required depends on the specific project requirements and design considerations.

    • The number of pole 1km cabling needed will depend on the distance to be covered and the spacing between poles.

    • Factors such as terrain, existing infrastructure, and local regulations will also impact the number of poles required.

    • For example, in a straight road with no obstacles, fewer poles may be needed compar...

  • Answered by AI
  • Q3. Pole base plate size
  • Ans. 

    The size of the pole base plate depends on the load requirements and soil conditions.

    • The size of the pole base plate should be determined by the structural engineer based on the load requirements of the pole.

    • The soil conditions at the site also play a crucial role in determining the size of the base plate.

    • Factors such as wind load, seismic activity, and the weight of the pole itself should be considered when determinin

  • Answered by AI
  • Q4. Stay plate dimension
  • Ans. 

    Stay plate dimensions are typically specified by the engineer or designer based on the specific requirements of the structure.

    • Stay plate dimensions are determined based on the load and stress requirements of the structure.

    • The dimensions of stay plates can vary depending on the material used and the design specifications.

    • Stay plates are often designed to distribute loads and provide stability in structures such as bridg

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Notice period of joining
  • Ans. 

    Typically 1-3 months notice period is required before joining a new job.

    • Notice period is the time between accepting a job offer and starting the new job.

    • It allows the current employer time to find a replacement and for the employee to wrap up their work.

    • Notice periods can vary depending on company policy and the level of the position.

    • It is common for notice periods to be 1-3 months in duration.

    • Some companies may requir...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is AI? IN
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Sikkim Manipal University (SMU) and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. (1)Why transformers rating is in kva ?
  • Ans. 

    Transformers rating is in kVA because it takes into account both voltage and current.

    • kVA is a unit of apparent power, which is the combination of real power (measured in kW) and reactive power (measured in kVAR).

    • Transformers are designed to handle a certain amount of power, and kVA rating takes into account both the voltage and current that the transformer can handle.

    • For example, a transformer with a rating of 100 kVA ...

  • Answered by AI
  • Q2. What is difference between ground and earth
  • Ans. 

    Ground is a conducting body that is used as a reference point for electrical circuits, while earth is a large conducting body that acts as a sink for electrical charges.

    • Ground is a reference point for electrical circuits, while earth is a sink for electrical charges.

    • Ground is a local concept, while earth is a global concept.

    • Ground is a man-made concept, while earth is a natural concept.

    • Ground is used to prevent electri...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Bajaj Electricals Site Engineer interview:
  • Transformers
  • Transmission
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(8 Questions)

  • Q1. What is breathing inside a trasformer?
  • Ans. 

    Breathing inside a transformer refers to the movement of air caused by temperature changes and the expansion and contraction of the transformer's internal components.

    • Breathing is a natural phenomenon that occurs in transformers due to thermal cycling.

    • As the transformer heats up during operation, the internal components expand, causing the air inside to be expelled.

    • When the transformer cools down, the internal component...

  • Answered by AI
  • Q2. What is circuit breaker?
  • Ans. 

    A circuit breaker is an automatic electrical switch that protects an electrical circuit from damage caused by overload or short circuit.

    • It automatically interrupts the flow of electricity when it detects a fault in the circuit.

    • It can be reset manually or automatically after the fault is cleared.

    • It is commonly used in homes, buildings, and industrial settings to protect electrical equipment and prevent fires.

    • Examples in...

  • Answered by AI
  • Q3. How many types of staters are?
  • Ans. 

    There are several types of starters used in engineering, such as direct-on-line starters, star-delta starters, and auto-transformer starters.

    • Direct-on-line starters are the simplest type and provide full voltage to the motor at startup.

    • Star-delta starters reduce the voltage during startup to minimize the current surge.

    • Auto-transformer starters use an autotransformer to reduce the voltage during startup.

    • Other types incl...

  • Answered by AI
  • Q4. What is full form of s.c.r
  • Ans. 

    The full form of S.C.R is Silicon Controlled Rectifier.

    • S.C.R stands for Silicon Controlled Rectifier.

    • It is a type of semiconductor device used for controlling electric current.

    • It is widely used in power control applications such as motor speed control, lighting control, and power supplies.

    • S.C.R acts as a switch that can be triggered to conduct or block current flow.

    • It has three terminals - anode, cathode, and gate.

    • When...

  • Answered by AI
  • Q5. What is kirchooff's law?
  • Ans. 

    Kirchhoff's law is a fundamental principle in electrical circuit analysis that relates to the conservation of charge and energy.

    • Kirchhoff's law includes two principles: Kirchhoff's current law (KCL) and Kirchhoff's voltage law (KVL).

    • KCL states that the sum of currents entering a node is equal to the sum of currents leaving the node.

    • KVL states that the sum of voltages around any closed loop in a circuit is equal to zero...

  • Answered by AI
  • Q6. What is charging of an electrode in e.s.p control in a thermal power plant.
  • Ans. 

    Charging of an electrode in e.s.p control is the process of applying an electric charge to the electrode to attract and collect particulate matter in a thermal power plant.

    • Charging of an electrode is a crucial step in the operation of an electrostatic precipitator (e.s.p) in a thermal power plant.

    • The electrode is charged with a high voltage DC power supply, typically ranging from 40,000 to 70,000 volts.

    • The charged elec...

  • Answered by AI
  • Q7. What is A.c.p and LTMSB pannels
  • Ans. 

    A.C.P stands for Aluminum Composite Panel and LTMSB panels are Low Tension Main Switch Boards used in electrical systems.

    • A.C.P is a lightweight material used for cladding, facades, and signage.

    • It consists of two thin aluminum sheets bonded to a non-aluminum core.

    • LTMSB panels are used to distribute power to various electrical loads in a building.

    • They are designed to handle low voltage and current levels.

    • LTMSB panels typ...

  • Answered by AI
  • Q8. Acp is auxilary control pannel and LTMSB is low transmission main switch board.

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is your job role in the carrent company?
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jun 2023. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Group Discussion 

Planning is best way of working style and complete the job very quality work.

Round 3 - Technical 

(5 Questions)

  • Q1. Yes but working experience on the job
  • Q2. Any way of working answer
  • Q3. Experience matter person is don't loss any item on company very very important
  • Q4. Wtp, ESR , Intake , pipe line- Di &HDPE,FHTC connection and etc with billing any work.
  • Q5. Thanks and regards Samir mishra Please take chance the I will showingmyhard workingin a mont.
Round 4 - Assignment 

Construction manager discussion with start work .

Round 5 - Case Study 

Any work start before discussion with lovour and supervisor .

Round 6 - Group Discussion 

Group discussion is most important the work will be start the don't any problem

Interview Questionnaire 

1 Question

  • Q1. Have you many year experience?

Interview Preparation Tips

Interview preparation tips for other job seekers - Yes, I am always ready for interviewing.
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
Selected Selected

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Water treatment plant questions 1. What are the structures in water treatment plant?
  • Q2. What is their functions?
  • Ans. 

    The functions of a Civil Site Engineer include planning, designing, and overseeing construction projects.

    • Planning and designing construction projects

    • Overseeing construction activities and ensuring compliance with regulations

    • Preparing cost estimates and budgets

    • Collaborating with architects, contractors, and other professionals

    • Ensuring safety and quality standards are met

    • Managing project timelines and schedules

    • Conducting...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - When you sitting at the front of interviewer. Keep mind calm, and throw the stress away, give answers that did you knows perfectly.

Skills evaluated in this interview

Genus Power Infrastructures Interview FAQs

What are the top questions asked in Genus Power Infrastructures Site Supervisor, Site in Charge and Site Engineer interview?

Some of the top questions asked at the Genus Power Infrastructures Site Supervisor, Site in Charge and Site Engineer interview -

  1. Who many type mete...read more
  2. 11 kv laine two pole gep met...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Genus Power Infrastructures interview
Company Website
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

Samsung Interview Questions
4.0
 • 539 Interviews
Siemens Interview Questions
4.1
 • 416 Interviews
KEC International Interview Questions
4.1
 • 286 Interviews
HARMAN Interview Questions
3.8
 • 247 Interviews
ABB Interview Questions
4.1
 • 221 Interviews
OPPO Interview Questions
4.0
 • 201 Interviews
Havells Interview Questions
4.0
 • 193 Interviews
LG Electronics Interview Questions
4.0
 • 184 Interviews
Blue Star Interview Questions
4.1
 • 147 Interviews
View all
Engineer
134 salaries
unlock blur

₹1.8 L/yr - ₹7 L/yr

Senior Engineer
114 salaries
unlock blur

₹3.3 L/yr - ₹9.8 L/yr

Assistant Manager
81 salaries
unlock blur

₹4.3 L/yr - ₹12 L/yr

Assistant Engineer
48 salaries
unlock blur

₹1.5 L/yr - ₹4.3 L/yr

Deputy Manager
45 salaries
unlock blur

₹6 L/yr - ₹15.6 L/yr

Explore more salaries
Compare Genus Power Infrastructures with

ABB

4.1
Compare

Siemens

4.1
Compare

BHEL

4.2
Compare

Schneider Electric Infrastructure

4.2
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview