30+ SS&C TECHNOLOGIES Interview Questions and Answers

Launching girder is a temporary structure used in construction to move and position heavy loads.

• Launching girder is typically made of steel and consists of multiple sections that can be assembled and disassembled.

• It is used in the construction of bridges, viaducts, and other structures to lift and move precast concrete segments into position.

• The launching operation involves the step-by-step movement of the girder along the bridge span, allowing the construction of the structu...read more

Covering is provided in steel reinforcement to protect it from corrosion and to ensure proper bond with concrete.

• Covering protects steel reinforcement from corrosion caused by exposure to moisture and chemicals in the environment.

• It helps in maintaining the bond between steel reinforcement and concrete, ensuring structural integrity.

• Proper covering thickness is important to prevent rusting of steel bars and maintain durability of the structure.

• Covering also helps in preventin...read more

The leaping zone of steel reinforcement refers to the area where the steel bars are not provided in a concrete member.

• The leaping zone is typically found in beams and slabs where the steel reinforcement is not required to be continuous.

• It is important to ensure that the leaping zone does not compromise the structural integrity of the member.

• Proper detailing and design considerations are necessary to determine the extent of the leaping zone.

• The leaping zone helps in reducing t...read more

Site uses materials can be identified through visual inspection, testing, and documentation.

• Conduct visual inspection of materials on site to identify their type and quality

• Perform tests on materials such as soil, concrete, and asphalt to determine their properties

• Review documentation such as material specifications, delivery receipts, and quality control reports

• Consult with suppliers and manufacturers to verify the authenticity of materials used on site

Horizon control refers to maintaining the aircraft's pitch and roll angles. Poor maintenance can lead to loss of control and accidents.

• Horizon control is the process of maintaining the aircraft's pitch and roll angles using instruments such as the attitude indicator and artificial horizon.

• If the horizon is not maintained well, the aircraft can lose control and enter into dangerous attitudes such as a stall or spin.

• Poor horizon control can also lead to spatial disorientation, ...read more

The quantity of work that can be done with 1 bag of cement varies depending on the type of work.

• 1 bag of cement can be used to lay approximately 70-80 standard bricks

• 1 bag of cement can be used to plaster approximately 10-12 square meters of wall

• 1 bag of cement can be used to create approximately 3-4 cubic meters of concrete

• 1 kg of putty/paint can cover approximately 10-12 square meters of wall

I prioritize the safety of employees and follow established protocols for handling emergencies.

• Immediately notify emergency services and management

• Secure the site and ensure the safety of remaining employees

• Provide support and resources for affected employees and their families

• Conduct a thorough investigation to determine the cause and prevent future incidents

Maivan technology consists of various components including sensors, software, and data analytics for monitoring and managing civil infrastructure.

• Sensors are used to collect data on various parameters such as temperature, humidity, and structural integrity.

• Software is utilized to process the data collected by sensors and provide real-time monitoring and analysis.

• Data analytics tools are employed to identify patterns, trends, and potential issues in the infrastructure.

• Examples...read more

The density of steel is approximately 7.85 grams per cubic centimeter.

• The density of steel is commonly measured in grams per cubic centimeter (g/cm³).

• The density of steel can vary depending on the specific type and composition of the steel.

• For example, the density of carbon steel is typically around 7.85 g/cm³.

• Stainless steel, on the other hand, has a slightly lower density of around 7.9 g/cm³.

• The density of steel is an important factor in structural engineering as it affects...read more

I have executed various types of structures including high-rise buildings, bridges, and industrial facilities.

• Executed high-rise buildings with complex structural systems

• Designed and analyzed bridges with different span lengths and types of materials

• Managed the structural design of industrial facilities such as power plants and manufacturing plants

• Worked on retrofitting and rehabilitation of existing structures

• Collaborated with architects and contractors to ensure the structu...read more

A section of stairs case with reinforcement is a structural drawing showing the details of the stairs and the reinforcement bars used for strength.

• Include dimensions and materials used for the stairs and reinforcement bars

• Show the arrangement of reinforcement bars in the section view

• Label the different components of the stairs case for clarity

Creep control is the process of preventing or reducing the deformation of a material under a constant load over time.

• Creep is a phenomenon where a material deforms over time under a constant load or stress.

• Creep can be controlled by reducing the temperature, decreasing the load or stress, or using materials with higher strength.

• For example, in the aerospace industry, creep control is important for preventing deformation of materials in high-temperature environments.

• In the con...read more

Gate pass and bill verification process for subcontractor manpower.

• Gate pass should be issued to all subcontractor manpower entering the premises.

• The gate pass should include details such as name, company, purpose of visit, and duration of stay.

• The gate pass should be verified by the concerned department before allowing entry.

• The bill verification process should include checking the number of hours worked, rates charged, and any additional expenses.

• The bill should be cross-ch...read more

BBS stands for Bar Bending Schedule. It is a document that provides details of reinforcement steel bars required for a construction project.

• BBS is calculated based on the design drawings and specifications.

• It includes details such as bar diameter, length, shape, and number of bars required for each structural element.

• BBS helps in estimating the quantity of steel required and also ensures that the reinforcement is placed correctly during construction.

• It is an important documen...read more

Forward snaking and reverse snaking are techniques used in cable laying.

• Forward snaking involves pulling a cable through a conduit from one end to the other.

• Reverse snaking involves pushing a cable through a conduit from one end to the other.

• Both techniques are used to lay cables in tight spaces or areas with limited access.

• Reverse snaking is often used when the cable needs to be protected from damage during installation.

• Forward snaking is often used when the cable is already...read more

Production in longwall is calculated by measuring the amount of coal extracted per unit time.

• Measure the amount of coal extracted per unit time

• Calculate the production rate by dividing the amount of coal extracted by the time taken

• Use sensors and monitoring systems to track the production

• Adjust the longwall cutting speed and depth to optimize production

Staggering in longwalls refers to the practice of leaving pillars of coal between adjacent panels to provide support.

• Staggering is a technique used in longwall mining to prevent the collapse of the roof and walls of the mine.

• It involves leaving pillars of coal between adjacent panels to provide support.

• The size and shape of the pillars depend on the geology of the mine and the equipment used.

• Staggering can help to increase the safety and efficiency of longwall mining operatio...read more

Dynamic pressures act on supports by exerting force and causing movement.

• Dynamic pressures are caused by fluid flow or wind gusts.

• These pressures can cause vibrations and oscillations in the structure.

• Supports must be designed to withstand these forces and prevent failure.

• Examples of supports include beams, columns, and braces in buildings and bridges.

• Proper analysis and testing is necessary to ensure the safety and stability of the structure.

Participation in community service activities can benefit the company's image and reputation.

• Volunteering at local events or charities

• Organizing donation drives for a cause

• Participating in environmental clean-up initiatives

• Mentoring programs for underprivileged youth

• Sponsoring local sports teams or events

The question is unclear and lacks context. It is not related to any specific field.

• The question needs clarification on what is being referred to as 'fall'

• It is unclear whether the question is related to a specific field or industry

• Without more information, it is difficult to provide a meaningful answer

The density of RCC (Reinforced Cement Concrete) and PCC (Plain Cement Concrete) varies depending on the mix proportions.

• The density of RCC typically ranges from 2200 to 2500 kg/m³.

• The density of PCC generally ranges from 2200 to 2400 kg/m³.

• The density can vary based on the type and size of aggregates used, the water-cement ratio, and the presence of additives.

• For example, a mix with a higher proportion of aggregates will have a higher density.

• Density is an important factor in...read more

Start tiling from the center of the wall and work your way outwards.

• Find the center point of the wall and mark it.

• Start tiling from the center point and work your way outwards.

• Use a spirit level to ensure the tiles are straight.

• Leave space for grouting between tiles.

• Cut tiles to fit around fixtures and edges.

• Finish with a row of half tiles at the top or bottom.

Procurement process involves identifying needs, selecting suppliers, negotiating contracts, and managing supplier relationships.

• Identify the need for goods or services

• Select potential suppliers and evaluate them based on criteria such as price, quality, and delivery time

• Negotiate contracts with chosen suppliers

• Manage supplier relationships to ensure timely delivery and quality of goods or services

• Monitor supplier performance and make adjustments as necessary

Before tiling at bath/toilets, it is important to prepare the surface properly to ensure a long-lasting and durable finish.

• Ensure the surface is clean and free of any debris or dust.

• Check for any cracks or damage and repair them before tiling.

• Apply a waterproofing membrane to prevent water damage.

• Allow the surface to dry completely before tiling.

• Use the appropriate adhesive and grout for the type of tiles being used.

• Consider using a tile leveling system to ensure a flat and e...read more

The terms and conditions for the project manager position in the highway industry.

• The terms and conditions will outline the responsibilities and expectations of the project manager.

• It may include details about the duration of the project, working hours, and compensation.

• Terms and conditions may also cover aspects such as leave policies, benefits, and performance evaluation.

• Examples of specific terms and conditions could be the requirement to work on weekends if necessary, adh...read more

The slope of stairs refers to the angle at which the stairs are inclined, affecting safety and accessibility.

• The slope of stairs is typically between 30-35 degrees for comfortable and safe use.

• Building codes may dictate specific slope requirements for stairs to ensure safety and accessibility.

• The slope of stairs can be calculated using trigonometry, with the rise and run of the stairs determining the angle.

• A steep slope can make stairs difficult to climb, while a shallow slop...read more

Design patterns are reusable solutions to common problems in software design.

• Design patterns provide a template for solving recurring design problems in software development.

• They help in making code more maintainable, scalable, and easier to understand.

• Examples of design patterns include Singleton, Factory, Observer, and Strategy patterns.