Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Fluor Corporation Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 14 May 2021

Fluor Corporation Graduate Engineer Trainee (Get) Interview Experiences

1 interview found

Interview Questionnaire 

1 Question

  • Q1. Why Induction based generators are not used
  • Ans. 

    Induction generators are not used due to their poor efficiency and inability to control voltage and frequency.

    • Induction generators have low efficiency compared to other types of generators.

    • They cannot control voltage and frequency, which is important for many applications.

    • Induction generators are mainly used in small-scale applications such as wind turbines.

    • Other types of generators such as synchronous generators are p...

  • Answered by AI

Interview questions from similar companies

I was interviewed in Oct 2016.

Interview Questionnaire 

3 Questions

  • Q1. Tell us about yourself
  • Ans. 

    I am a recent graduate with a degree in engineering, seeking a trainee position to apply my knowledge and skills.

    • Recent graduate with a degree in engineering

    • Seeking a trainee position

    • Knowledge and skills in engineering

    • Motivated and eager to learn

    • Strong problem-solving and analytical skills

  • Answered by AI
  • Q2. What did you learn during your internships?
  • Ans. 

    During my internships, I learned various technical skills and gained practical experience in engineering projects.

    • Developed proficiency in using engineering software and tools

    • Enhanced problem-solving and critical thinking abilities

    • Improved communication and teamwork skills

    • Learned to apply theoretical knowledge to real-world projects

    • Gained insights into industry practices and standards

  • Answered by AI
  • Q3. Questions based on the assignment I did in my internship

Interview Preparation Tips

Round: Test
Experience: The test was in MCQ format for both technical and aptitude & general knowledge sections. The difficulty level was average. There were around 5 general knowledge/current affairs questions. About 15 quantitative aptitude questions and 20 technical questions from subjects taught till 6th semester. 11 out of 18 students were shortlisted for the next round.
Tips: Brush up your basics in all the major subjects. Refer quantitative aptitude books and practice every type of sums.
Duration: 1 hour
Total Questions: 40

Round: Group Discussion
Experience: All 11 shortlisted students were part of the same GD. We were given 5 topics out of which we had to decide on unanimously. All the topics were general/social in nature and not related to current affairs of the world. 10 mins are given after the selection of the topic to think and jot down the points. The first person to start speaking has to introduce the topic and then start to put his point. There should also be a consensus during the end.
Tips: Use your initial 10 mins well. Write down all the points for both for and against of the topic. You need not necessarily stick to one aspect. Don't speak too much or too less. Just the apt! Give chance to others as well but at the same time don't hesitate and hold yourself back. You can also say "I agree with this but I would also add.." or " I disagree with this point, I feel...". But these statements should be very polite.
Duration: 30 minutes

Round: Technical + HR Interview
Experience: 8 students out of 11 were shortlisted for this round. This round was individual interview by a panel of two of company's officials. They asked questions from different sections to all the students. Some of them were asked application based questions for example is it easier to dry clothes in hot and humid outside than in an air conditioned room, what is the use of psychrometric charts, is cooling tower efficient. In my case the questions were based on my internships. I did my internships from consultancies like Jacobs so they asked my about basic documents used in the those companies and also about my assignments that I did.
Tips: Basics are very important in this round and so is your internships, project(if any). Keep your mind open while answering, workout all the conditions in your mind related to the question.

College Name: Thadomal Shahani Engineering College

Interview Questionnaire 

2 Questions

  • Q1. Give name of first 20 elements of periodic table
  • Ans. 

    The first 20 elements of the periodic table are essential building blocks of matter.

    • The first element is Hydrogen (H)

    • The second element is Helium (He)

    • The third element is Lithium (Li)

    • The fourth element is Beryllium (Be)

    • The fifth element is Boron (B)

    • The sixth element is Carbon (C)

    • The seventh element is Nitrogen (N)

    • The eighth element is Oxygen (O)

    • The ninth element is Fluorine (F)

    • The tenth element is Neon (Ne)

    • The eleventh...

  • Answered by AI
  • Q2. What is laminar flow and tubulent flow?
  • Ans. 

    Laminar flow is a smooth, orderly flow of fluid while turbulent flow is a chaotic, irregular flow.

    • Laminar flow occurs at low velocities and is characterized by layers of fluid moving parallel to each other.

    • Turbulent flow occurs at high velocities and is characterized by eddies and swirls in the fluid.

    • Laminar flow is commonly observed in blood vessels while turbulent flow is observed in rivers and oceans.

    • The transition ...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Good
Tips: Focus on basic
Duration: 3 hrs minutes
Total Questions: 150

Round: Group Discussion
Experience: Good
Tips: Express your Idea clearly.
Don,t go with the mass flow or change your opnion during discussion.
Give chance to other people to express their idea.
Adhere to your beliveing and strengthen your points with solid proof or example.

Round: Technical Interview
Experience: Good
Tips: Keep calm and don't get nervous.
Don't get worried if you do not know some answer.
If you don't to answer say politely that you don't know answer rather than giving wrong answer.

Skills: Technical knowledge, Problem solving capability, Communication skills, Under stress workability
College Name: SVNIT
Motivation: L&T is one of the leading company in the field of the heavy metal engineering.
It can give you good knowledge of working in the heavy metal industries.

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself?

Interview Preparation Tips

Round: Test
Experience: Most of the questions are not so difficult.
Duration: 60 minutes

Round: Technical Interview
Experience: As Iam a Electrical student, I was asked questions on Transformers(like transformer losses), Power systems, Electrical machines(two machine ratings were given and Iam asked to find which is more cost efficient), Electronics(like Adder, Subtractor, Truth Tables etc.,) and on my elective i.e New Enterprise Creation and Management(NECM).

Skill Tips: Concentrate on learning concepts and applying them for practical purposes.
College Name: NIT WARANGAL

Interview Preparation Tips

Round: Test
Experience: Questions were general aptitude ranging from analytical reasoning,verbal,quant,reading comprehension and also non verbal total time allotted was 75 minutes and there was sectional cut off for each of the sections.
Duration: 75 minutes

Round: Technical Interview
Experience: Interview was the most important pat of the selection process questions were purely technical .they asked about my project paper presented and training and gave some practical problems interview was for 45-50 minutes.
Tips: Required a good understanding of the core subjects like manufacturing and machine tools.

Round: HR Interview
Experience: HR was apart of the technical assessment itself they inquired about my background and my interest to join the company.

Skill Tips: In the interview the interviewer seemed to put stress on me in the last to judge my temperament rest was all routine type of procedure they followed. L&T is a company that looks for a candidate good in the core subjects rest things like communication and attitude comes second to them so be prepared for the interview and solve some basic aptitude questions before sitting for the company.
College Name: NIT WARANGAL

Interview Questionnaire 

7 Questions

  • Q1. Which are your favourite subjects and topics?
  • Ans. 

    My favorite subjects are Mathematics, Physics, and Computer Science.

    • I enjoy solving complex mathematical problems and equations.

    • I find the laws of physics fascinating and enjoy learning about them.

    • I am interested in programming and enjoy learning new coding languages and techniques.

  • Answered by AI
  • Q2. Which are common IS codes used and what are their revisions?
  • Ans. 

    Common IS codes and their revisions used in engineering

    • IS 456:2000 - Code of practice for plain and reinforced concrete

    • IS 800:2007 - Code of practice for general construction in steel

    • IS 1893:2016 - Criteria for earthquake resistant design of structures

    • IS 1343:2012 - Code of practice for prestressed concrete

    • IS 383:2016 - Coarse and fine aggregates for concrete

    • IS 10262:2019 - Concrete mix proportioning guidelines

    • IS 1200:...

  • Answered by AI
  • Q3. Draw SFD of continuous beam
  • Ans. 

    Draw SFD of continuous beam

    • Identify the support reactions

    • Cut the beam at a section and draw the free body diagram

    • Determine the shear force at the section

    • Plot the shear force diagram

    • Determine the bending moment at the section

    • Plot the bending moment diagram

    • Repeat for all sections of the beam

  • Answered by AI
  • Q4. What's your major project topic? Explain
  • Ans. 

    My major project topic was on developing a smart irrigation system using IoT.

    • The project aimed to optimize water usage in agriculture by using sensors and IoT technology.

    • The system was designed to collect data on soil moisture, temperature, and humidity to determine the water requirements of crops.

    • Based on the data collected, the system would automatically control the irrigation process, reducing water wastage and incr...

  • Answered by AI
  • Q5. Why did you take up civil engineering?
  • Ans. 

    I took up civil engineering because of my interest in designing and constructing buildings and infrastructure.

    • I have always been fascinated by the process of building and creating things

    • I enjoy problem-solving and finding solutions to complex challenges

    • Civil engineering offers a wide range of career opportunities in various sectors such as construction, transportation, and environmental engineering

    • I believe that civil ...

  • Answered by AI
  • Q6. Why are you interested in L&T?
  • Ans. 

    I am interested in L&T because of its reputation as a leading engineering and construction company.

    • L&T has a strong presence in various sectors such as infrastructure, power, and defense.

    • The company has a reputation for delivering high-quality projects on time and within budget.

    • L&T offers excellent opportunities for career growth and development.

    • I am impressed by L&T's commitment to sustainability and social responsibi...

  • Answered by AI
  • Q7. Are you ready to work at anyplace in India?
  • Ans. 

    Yes, I am willing to work at anyplace in India.

    • I am open to exploring new places and cultures.

    • I am adaptable and can adjust to new environments.

    • I am excited to work with diverse teams and learn from them.

    • I am committed to my career and willing to go the extra mile.

    • I understand that working in different locations can broaden my experience and skills.

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Good
Duration: 90 minutes

Round: Technical Interview
Experience: Not that great. Nervous as this was my first interview.
Tips: Just be confident.

Round: HR Interview
Experience: Again nervous but not that bad.
Tips: Speak frankly.

Skills: Technical Understanding, Speed, Confi
College Name: NIT Surathkal

Interview Questionnaire 

1 Question

  • Q1. Tell me about yourself

Interview Preparation Tips

Round: Test
Experience: Questions were from number system, probablity , common analytical reasoning questions, some questions from vocabulary.
Duration: 150 minutes

Round: Technical Interview
Experience: There was only one round of PI which was completely technical. the following were some of the questions :
1. questions from stress strain diagram of steels 
2. FeFe3C diagram 
3. fatigue and creep 
4. TTT diagram make sure you have an answer to your favorite subject.

Round: HR Interview
Experience: There was nothing like HR other than the basic question.

General Tips: LnT is the first company that visits NITW campus.there are quite a number of applicants, to crack this company you have to brush up your technical fundamentals.
Skill Tips: It was an hour of full technical grind.
College Name: NIT WARANGAL

Interview Questionnaire 

3 Questions

  • Q1. Why do you want LnT
  • Ans. 

    I am interested in LnT because of its reputation and growth potential.

    • LnT has a strong reputation in the industry for its quality work and ethical practices.

    • The company has a diverse portfolio of projects and is constantly expanding into new markets.

    • I am impressed by LnT's commitment to sustainability and social responsibility.

    • Working for LnT would provide me with opportunities for professional growth and development.

    • I...

  • Answered by AI
  • Q2. Where do you see yourself after 3 years?
  • Ans. 

    In 3 years, I see myself as a senior manager in a reputable company, leading a team of professionals and contributing to the growth of the organization.

    • Leading a team of professionals

    • Contributing to the growth of the organization

    • Continuing to learn and develop new skills

    • Networking and building relationships within the industry

  • Answered by AI
  • Q3. What are the qualities of a project manager?
  • Ans. 

    A project manager should have leadership, communication, organization, and problem-solving skills.

    • Leadership skills to guide the team towards the project goals

    • Communication skills to effectively convey information to team members and stakeholders

    • Organization skills to manage resources and timelines

    • Problem-solving skills to identify and address issues that arise during the project

    • Example: A project manager should be abl...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Maths was easy from R.S.Aggarwal, the analytical was the toughest among the 3 but not so tough.
Tips: The important chapters like time and work, time and distance, trains, percentages, sets, data interpretations.. english had antonyms, reading comprehensions, sentence completions only one or two words were unknown. Practice questions from R.S.Aggarwal. Verbal. That is a must.
Duration: 60 minutes

Round: Technical Interview
Experience: The tech interview was for one hour and ten minutes but i was asked very basic fundas. no high funda questions. project was asked. then i was questions like Bernoulli equations, prove it on the water bottle kept it on the table, some questions on ideal gas law, heat transfer questions, difference between combustion and oxidation general stuff ,it was simple. But students from mechanical and other branches were asked proper tech stuff.

Round: HR Interview
Experience: There was no hr interview as such but i was asked more HR in the interview. I was asked why do you want LnT, LnT pays low so why will u continue here. Where do you see yourself after 3 years? What are the qualities of a project manager?, will you fight for your rights etc.

Skill Tips: I would say it was a nice experience and gave me actual feel of a campus interview. For people who are looking for a hard core technical job i would say from my internship experience that this is an amazing
place to begin with even though the salary is low.
College Name: NIT WARANGAL

Interview Questionnaire 

4 Questions

  • Q1. How many years can you give to the company?
  • Ans. 

    I am committed to the company and can give my best for as long as I am needed.

    • I am dedicated to my work and take pride in my job

    • I am willing to learn and grow with the company

    • I am open to new opportunities within the company

    • I am committed to meeting the company's goals and objectives

  • Answered by AI
  • Q2. What do you expect from the company?
  • Ans. 

    I expect the company to provide a challenging and rewarding work environment with opportunities for growth and development.

    • Opportunities for career advancement

    • Support for continued learning and development

    • A positive and collaborative work culture

    • Fair compensation and benefits

    • Clear communication and transparency from management

  • Answered by AI
  • Q3. What all other fields are you interested in?
  • Ans. 

    I am interested in fields related to technology, business, and psychology.

    • Technology - Artificial Intelligence, Machine Learning, Data Science

    • Business - Marketing, Entrepreneurship, Finance

    • Psychology - Behavioral Economics, Cognitive Psychology, Social Psychology

  • Answered by AI
  • Q4. How is this company going to help you in your career?
  • Ans. 

    The company will provide me with opportunities for growth and development in my field.

    • The company offers regular training and development programs to enhance my skills.

    • I will have the chance to work on challenging projects that will help me gain experience.

    • The company has a strong reputation in the industry, which will help me build my professional network.

    • I will receive guidance and mentorship from experienced profess

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Quantitative was basic concepts like ratios, profit and loss, geometry, analytical was also involved in quantitative. English was general words few were frequently used GRE words.
Duration: 180 minutes

Round: Technical Interview
Experience: Subject of interest was asked. General practical knowledge questions were asked. Questions on project work were given more importance.

Skill Tips: The aptitude test was easy. The company has many fields,so its a good option to explore and learn. the work profile offered was good. I was told by the interviewer that you are given chance to experiment and see all the fields and can go for another if its your call. Be sure of exactly what you want from the company and why you want the company. Be thorough with the basics and very sure about your project and it need not be a very high standard work. Its all about your interest and enthusiasm to do something other than the college work.
College Name: NIT WARANGAL

Interview Preparation Tips

Round: Test
Experience: Usage of articles, General English, Synonyms, Antonyms, Passage reading. reasoning, simple maths , situational analysis were part of the test paper.
Duration: 60 minutes

Round: Technical Interview
Experience: In the technical interview the basic knowledge in civil engineering was checked and Bending moment and shear force
diagrams for a basic structure were asked and A Slab for a sump is to be laid of size 3m X 2m, for which there are two alternatives of laying slabs i.e two slabs of 1m X 3m each and three Slabs of 1m X 2m each and the best alternative was to lay three slabs of 1m X 3m so that the depth of slab can be reduced. Why the cross section of a chimney is increased from top to bottom. Typical reinforcement detailing for Structural Members and normal percentage of reinforcement adopted for different types of structures, Analysis of structures.The details about the project work that u have done in your Btech,Dip.

Round: HR Interview
Experience: In the Personal Interview the details about the family background were asked .

Skill Tips: Your Basic knowledge in subject and the communicating abilities are the most important things that were checked and the answering style was also checked whether what you are answering is answered confidently or not. and whether u are able to choose a best alternative if some of the alternatives are given. Be perfect in basics and be touch with all the subjects that u have studied irrespective of the subject that you are the most interested in. CGPA is not of a big matter if u have the subject in you and perform well in the interview but it is better to have good CGPA.
College Name: NIT WARANGAL
Contribute & help others!
anonymous
You can choose to be anonymous

Recently Viewed

REVIEWS

Renault Nissan Technology & Business Centre India

No Reviews

CAMPUS PLACEMENT

Central University of Jharkhand, Ranchi

REVIEWS

Renault Nissan Technology & Business Centre India

No Reviews

LIST OF COMPANIES

North East Small Finance Bank

Locations

SALARIES

Renault Nissan Technology & Business Centre India

LIST OF COMPANIES

Suryoday Small Finance Bank

Locations

COMPANY BENEFITS

Renault Nissan Technology & Business Centre India

No Benefits

SALARIES

Renault Nissan Technology & Business Centre India

INTERVIEWS

Technip Energies

No Interviews

INTERVIEWS

Titan Company

No Interviews

Tell us how to improve this page.

Fluor Corporation Graduate Engineer Trainee (Get) Salary
based on 16 salaries
₹6 L/yr - ₹8 L/yr
89% more than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Fluor Corporation Graduate Engineer Trainee (Get) Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

4.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Associate Design Engineer
85 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
77 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Designer
49 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Design Engineer III
44 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Piping Design Engineer
39 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Fluor Corporation with

Bechtel

4.0
Compare

Jacobs Engineering Group

4.1
Compare

AECOM

4.2
Compare

McDermott International

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent