i
Excel Earthings
Filter interviews by
Be the first one to contribute and help others!
A substation is a facility used for transforming voltage levels in an electrical power system.
Substations receive high voltage electricity from power plants or transmission lines
They transform the voltage to a lower level for distribution to homes and businesses
Substations may also include equipment for protection, control, and monitoring of the power system
Transformers are classified based on their construction and cooling methods, such as dry-type, oil-filled, and cast resin transformers.
Transformers can be classified as dry-type, oil-filled, or cast resin based on their construction and cooling methods.
Dry-type transformers use air as the cooling medium and are suitable for indoor applications.
Oil-filled transformers use oil as the cooling medium and are commonly used ...
posted on 13 Sep 2024
Flow meters are devices used to measure the flow rate of a fluid in a pipe or conduit.
Differential pressure flow meters (e.g. Orifice plate, Venturi tube)
Positive displacement flow meters (e.g. Piston, Gear, Turbine)
Velocity flow meters (e.g. Electromagnetic, Ultrasonic)
Mass flow meters (e.g. Coriolis, Thermal)
Level sensors are used to measure the level of liquids or solids in tanks or containers.
Level sensors are commonly used in industries such as oil and gas, chemical, food and beverage, and water treatment.
They can be used to monitor and control the level of liquids, powders, or granular materials.
Different types of level sensors include ultrasonic, capacitance, radar, and float sensors.
Level sensors help in preventing o...
I applied via Referral and was interviewed in Jul 2024. There was 1 interview round.
I am a dedicated and experienced professional with strong leadership skills and a passion for driving team success.
Experienced in managing teams and projects
Strong communication and interpersonal skills
Proven track record of achieving goals and targets
Passionate about mentoring and developing team members
I failed to meet a project deadline due to underestimating the scope of work.
Underestimated the time and resources needed for the project
Failed to properly delegate tasks and manage team members
Learned the importance of thorough planning and communication
1 angle and 2 angle are terms used in engineering design to describe the orientation of a part or feature relative to a reference surface.
1 angle refers to a feature that is oriented parallel to the primary datum plane
2 angle refers to a feature that is oriented perpendicular to the primary datum plane
These terms are commonly used in geometric dimensioning and tolerancing (GD&T) to specify the orientation of features o...
Geometry and tolerance in design refer to the dimensions and allowable variations in a part or product.
Geometry refers to the shape and size of a part or product.
Tolerance is the allowable variation in dimensions to ensure proper fit and function.
Tolerances are specified using symbols like +, -, or a range of values.
For example, a hole may have a diameter of 10mm with a tolerance of +/- 0.1mm.
Tolerances can affect the
1 angle and 2 angle are terms used in engineering to describe the orientation of a part or feature in relation to a reference plane.
1 angle refers to the orientation of a part or feature with respect to one reference plane
2 angle refers to the orientation of a part or feature with respect to two reference planes
These terms are commonly used in engineering drawings to specify the orientation of features for manufacturin
posted on 15 Sep 2024
I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.
Faraday's law of electromagnetism states that a changing magnetic field induces an electromotive force in a conductor.
An electromotive force is induced in a conductor when there is a change in magnetic field strength or orientation.
This phenomenon is the basis for the operation of generators and transformers.
Faraday's law is mathematically represented as E = -dΦ/dt, where E is the induced electromotive force and Φ is t...
Kirchhoff's law states that the total current entering a junction is equal to the total current leaving the junction.
Kirchhoff's Current Law (KCL) states that the algebraic sum of currents entering a node is zero.
Kirchhoff's Voltage Law (KVL) states that the sum of voltage drops in a closed loop is equal to the applied voltage.
KCL is based on the principle of conservation of charge, while KVL is based on the conservati...
posted on 19 Jun 2024
posted on 15 Jun 2024
PLC programming assistant should have knowledge of ladder logic, troubleshooting skills, and ability to read and interpret electrical schematics.
Knowledge of ladder logic programming
Troubleshooting skills to identify and fix issues in PLC programs
Ability to read and interpret electrical schematics to understand system connections
Experience with PLC software such as Siemens TIA Portal or Allen Bradley Studio 5000
posted on 6 Jan 2024
I applied via Recruitment Consulltant and was interviewed in Dec 2023. There were 3 interview rounds.
posted on 21 Apr 2024
I applied via Referral and was interviewed in Mar 2024. There were 3 interview rounds.
Give a simple test in the Google forms
based on 7 reviews
Rating in categories
Technical Engineer
4
salaries
| ₹1.5 L/yr - ₹1.9 L/yr |
Accountant
4
salaries
| ₹2.4 L/yr - ₹3 L/yr |
Marketing Manager
4
salaries
| ₹2 L/yr - ₹3 L/yr |
Technical Marketing Manager
3
salaries
| ₹2.4 L/yr - ₹2.4 L/yr |
Bekaert Industries
Perto
S R Enterprises
Sai Enterprises