Upload Button Icon Add office photos

Epiroc

Compare button icon Compare button icon Compare

Filter interviews by

Epiroc Heavy Equipment Mechanic Interview Questions and Answers

Updated 16 Feb 2022

Epiroc Heavy Equipment Mechanic Interview Experiences

1 interview found

I applied via Walk-in and was interviewed in Jan 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

The paper contained Safety ,Technical and electrical questions

Round 3 - One-on-one 

(1 Question)

  • Q1. A little explaination of my profile and work experience. Expected monthly earnings.
Round 4 - HR 

(6 Questions)

  • Q1. What are your salary expectations?
  • Q2. Tell me about yourself.
  • Q3. What are your strengths and weaknesses?
  • Q4. Where do you see yourself in 5 years?
  • Q5. Why are you looking for a change?
  • Q6. Share details of your previous job.

Interview Preparation Tips

Topics to prepare for Epiroc Heavy Equipment Mechanic interview:
  • Safety, Hydraulics and Electrical
Interview preparation tips for other job seekers - Been calm , straight and truthful in an interview

Interview questions from similar companies

I applied via Approached by Company and was interviewed in Feb 2018. There were 6 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Hydraulic and electrical
  • Q2. Hydraulic and electrical related

Interview Preparation Tips

Round: Resume Shortlist
Experience: *****

Round: Group Discussion
Experience: Hydraulic or electrical

General Tips: Yes
Skills: Electrical Machines, Electrical Machines
Duration: 1-4 weeks

I applied via Recruitment Consultant and was interviewed before Oct 2017. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is the basic hydraulic system? What are the function of various valves? What are the function of various Pumps? Hydraulic schematics? What is the Engine? What are the four strokes of an engine? Explai...
  • Ans. 

    The basic hydraulic system consists of various valves and pumps that work together to control fluid flow and pressure.

    • Valves in a hydraulic system control the direction, flow rate, and pressure of the fluid.

    • Examples of valves include check valves, relief valves, and control valves.

    • Pumps in a hydraulic system generate the flow and pressure of the fluid.

    • Examples of pumps include gear pumps, vane pumps, and piston pumps.

    • H...

  • Answered by AI

Interview Preparation Tips

General Tips: NA
Skills: Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: <1 week

Interview Questionnaire 

5 Questions

  • Q1. Tell me about yourself?
  • Ans. 

    I am a Service Engineer with expertise in troubleshooting and repairing complex machinery.

    • Experienced in diagnosing and resolving technical issues in industrial equipment

    • Proficient in using diagnostic tools and software to identify problems

    • Skilled in performing maintenance and repairs on various types of machinery

    • Strong problem-solving and communication skills

    • Ability to work independently and under pressure

    • Example: Suc...

  • Answered by AI
  • Q2. Why hydraulics Ram has different speed in head side and rod Side?
  • Ans. 

    The speed difference in a hydraulic ram is due to the difference in effective areas on the head side and rod side.

    • The head side of the ram has a larger effective area, resulting in slower speed.

    • The rod side of the ram has a smaller effective area, resulting in faster speed.

    • This speed difference is a result of the hydraulic pressure acting on different areas.

    • The speed ratio between the head side and rod side can be calc...

  • Answered by AI
  • Q3. What is the purpose of pressure relief valve?
  • Ans. 

    A pressure relief valve is used to protect equipment and systems from excessive pressure by releasing the pressure when it exceeds a certain limit.

    • Prevents damage to equipment and systems

    • Ensures safety of personnel

    • Maintains system integrity

    • Prevents explosions or ruptures

    • Relieves excess pressure by opening and releasing fluid or gas

    • Commonly used in boilers, pressure vessels, pipelines, and hydraulic systems

  • Answered by AI
  • Q4. What is orifice?
  • Ans. 

    An orifice is a small opening or hole through which fluid or gas can flow.

    • Orifices are commonly used in various industries, such as plumbing, engineering, and manufacturing.

    • They are often used to control the flow rate of fluids or gases.

    • Orifices can be found in devices like nozzles, valves, and flow meters.

    • The size of an orifice determines the flow rate and pressure drop across it.

    • Examples of orifices include the tiny ...

  • Answered by AI
  • Q5. Why you looking for a job change?
  • Ans. 

    I am looking for a job change to explore new opportunities and challenges.

    • Seeking career growth and advancement

    • Wanting to work in a different industry or with different technologies

    • Desire for a better work-life balance

    • Relocation or proximity to family

    • Unsatisfactory current job situation

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just give your introduction very simple short and sweet it's not to be so lengthy.
And the technical round is very simple as always. It consists of mainly Basics.
So don't worry...!!

Best of Luck...!!

I applied via Naukri.com and was interviewed before May 2018. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Explain about open loop & close loop operation in hydraulic system.
  • Ans. 

    Open loop and closed loop are two modes of operation in hydraulic systems.

    • Open loop operation: The hydraulic system operates without feedback control. The output is not adjusted based on the system's performance.

    • Closed loop operation: The hydraulic system uses feedback control to adjust the output based on the system's performance.

    • Open loop systems are simpler and less expensive, but they lack precision and accuracy.

    • Cl...

  • Answered by AI
  • Q2. Explain about Starting circuit.
  • Ans. 

    The starting circuit is responsible for initiating the engine's operation.

    • The starting circuit consists of components such as the battery, starter motor, ignition switch, and solenoid.

    • When the ignition switch is turned on, it sends a signal to the solenoid, which then engages the starter motor.

    • The starter motor uses electrical energy from the battery to turn the engine's crankshaft, starting the combustion process.

    • Once...

  • Answered by AI
  • Q3. Why should we hire you ?
  • Ans. 

    I am a highly skilled and experienced service engineer with a proven track record of successfully troubleshooting and resolving complex technical issues.

    • I have a strong technical background and extensive experience in diagnosing and repairing equipment.

    • I am a quick learner and can adapt to new technologies and processes easily.

    • I have excellent communication skills and can effectively communicate with customers and team...

  • Answered by AI
  • Q4. What is your core values ?
  • Ans. 

    My core values include integrity, accountability, and continuous learning.

    • Integrity: I believe in always doing the right thing, even when no one is watching.

    • Accountability: I take ownership of my actions and responsibilities.

    • Continuous learning: I strive to constantly improve my skills and knowledge.

    • Example: I once discovered a mistake in a project I was working on, and instead of ignoring it, I took responsibility and...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Questions based upon technical knowledge like engine, basic electrical & basic hydraulics.

General Tips: You should have deep knowledge about hydraulics system & DC electrics.
Skills: Communication, Body Language, Problem Solving, Analytical Skills, Leadership, Presentation Skills, Time Management, Decision Making Skills
Duration: 1-3 Months

I applied via Naukri.com

Interview Questionnaire 

2 Questions

  • Q1. Basics hydraulics, Basic electricals, Hydraulic Schematic. Basics in engine.
  • Q2. Every question was on basics things.

Interview Preparation Tips

Interview preparation tips for other job seekers - They are looking for strong basics from hydraulic and electrics. Also communication skills need to be good as well you have to handle customer lik

I applied via Campus Placement and was interviewed before Jan 2021. There were 6 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Description of boomer
  • Ans. 

    Boomer is a hydraulic drilling rig used in mining and construction industries.

    • Boomer is a versatile drilling rig that can be used for drilling holes of different sizes and depths.

    • It is equipped with a hydraulic system that powers the drilling mechanism.

    • Boomer is commonly used in mining and construction industries for drilling tunnels, shafts, and blast holes.

    • It can be operated by a single person or a team of operators ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just relux nd stay calm revise ur basic

I applied via Naukri.com and was interviewed in Feb 2021. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Basic questions about my background experience
  • Q2. Explain a previous breakdown u have attended
  • Q3. Tell us something about urself

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and honest..
Don't overrate urself learn the basics

I applied via Referral and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Basic hydraulic and basic electrical & engines, torque converter, power transmission etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Need a explain basic hydraulic & electrical system and power transmission, torque converter, basic engine, if you have previously earth moving equipment experience you can get the service engineer job easily.

Interview Questionnaire 

7 Questions

  • Q1. All drill machine I underground
  • Q2. Electrical system
  • Q3. Star /delta starter and relay contactor motor drifter
  • Q4. Electrical ckt
  • Q5. Hydraulic ckt
  • Q6. Electrical maintenance and also hydraulic system troubleshooting?
  • Q7. Yes

Epiroc Interview FAQs

How many rounds are there in Epiroc Heavy Equipment Mechanic interview?
Epiroc interview process usually has 4 rounds. The most common rounds in the Epiroc interview process are Resume Shortlist, Aptitude Test and One-on-one Round.

Tell us how to improve this page.

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 251 Interviews
ABB Interview Questions
4.1
 • 235 Interviews
Caterpillar Inc Interview Questions
4.3
 • 176 Interviews
JCB Interview Questions
4.0
 • 125 Interviews
Atlas Copco Interview Questions
4.2
 • 78 Interviews
View all
Service Engineer
226 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
161 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Project Engineer
52 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Service Engineer
49 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Engineer
45 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Epiroc with

Sandvik Mining and Rock Technology

4.2
Compare

Komatsu

3.9
Compare

Caterpillar Inc

4.3
Compare

Liebherr

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview