Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Dhampur Sugar Mills Team. If you also belong to the team, you can get access from here

Dhampur Sugar Mills Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Dhampur Sugar Mills Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 4 Feb 2022

Dhampur Sugar Mills Graduate Engineer Trainee (Get) Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What is your favorite subject ? Why heat transfer is more in forced convection than free convection? How many colour in flame and why what is Bernoulli principle ? what is fluidized bed boiler? what is flu...
  • Ans. 

    Answers to various technical questions related to engineering.

    • Forced convection involves external forces like pumps or fans to move the fluid, resulting in higher heat transfer compared to free convection where the fluid moves naturally due to density differences.

    • The color of a flame depends on the temperature and the chemical composition of the fuel. For example, a blue flame is hotter than a yellow flame.

    • Bernoulli's ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - For interview basics must be clear

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Jun 2020. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Basic thermodynamics questions like latent heat, sensible heat, thermodynamics cycles.
  • Q2. Sugar engg questions
  • Q3. Questions related to boiler, biochemistry of feed water.
  • Q4. Nomenclature of gears, design of gears, material , failure etc
  • Ans. 

    The question is about gears, their nomenclature, design, material, and failure.

    • Gears are named based on their shape, size, and function.

    • Design of gears involves selecting the right type of gear, number of teeth, pitch, and pressure angle.

    • Materials used for gears include steel, cast iron, bronze, and plastic.

    • Gears can fail due to various reasons such as wear, fatigue, and overload.

    • Common gear failures include pitting, s

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and face interview with positive attitude, if any answer u don't know, just simply deny.

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jan 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Group Discussion 

10 people in one group, topic drone technology

Round 3 - Technical 

(2 Questions)

  • Q1. Modes of Heat transfer
  • Ans. 

    Modes of heat transfer include conduction, convection, and radiation.

    • Conduction is the transfer of heat through a material without any movement of the material itself.

    • Convection is the transfer of heat through the movement of fluids, such as air or water.

    • Radiation is the transfer of heat through electromagnetic waves, such as the heat from the sun.

    • Examples of conduction include touching a hot stove or holding a cold dr...

  • Answered by AI
  • Q2. Design of distillation coloumn
  • Ans. 

    Design of distillation column involves determining the number of trays, column diameter, and feed location.

    • The number of trays is determined by the separation required and the reflux ratio.

    • Column diameter is determined by the vapor and liquid flow rates.

    • Feed location is determined by the composition of the feed and the desired product purity.

    • Other factors to consider include pressure drop, heat transfer, and material s...

  • Answered by AI
Round 4 - HR 

(2 Questions)

  • Q1. If we send you to Jammu will you work
  • Ans. 

    Yes, I am willing to work in Jammu.

    • I am open to working in any location assigned to me

    • I am adaptable and can adjust to new environments

    • I am excited to explore new places and cultures

    • I have worked in different cities before and have had positive experiences

  • Answered by AI
  • Q2. Tell us more about yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Be yourself and focus more on basics because they care about that only.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Good performance & technical answer

Round 2 - Technical 

(2 Questions)

  • Q1. What is Pump Whay required pump
  • Ans. 

    Pump Whay is a required pump for a specific application.

    • Pump Whay is likely a typo and should be corrected to 'Pump What'.

    • The required pump depends on the specific application and its requirements.

    • Examples of pump types include centrifugal pumps, diaphragm pumps, and gear pumps.

  • Answered by AI
  • Q2. What is sop & standard ruals
  • Ans. 

    SOP stands for Standard Operating Procedure, which are established procedures to ensure consistency and quality in operations. Standard rules are guidelines that must be followed.

    • SOPs are detailed step-by-step instructions on how to perform a specific task or operation.

    • Standard rules are general guidelines or regulations that must be followed in a particular setting.

    • SOPs help in maintaining consistency, quality, and ef...

  • Answered by AI

I applied via Campus Placement and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Most questions related to RCC and soile

Round 2 - Technical 

(1 Question)

  • Q1. What does grade in cement means
  • Ans. 

    Grade in cement refers to the strength of the cement mixture.

    • Grade in cement is a measure of the compressive strength of the cement mixture.

    • It is usually denoted by a number, such as 32.5 or 42.5, which indicates the strength in megapascals (MPa).

    • Higher grade cement is used for construction of structures that require higher strength, such as bridges and high-rise buildings.

    • The grade of cement is determined by testing t...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic core knowledge is required not too indepth except for chemical engineers and HR round is pretty chill
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Oct 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What is Heat of formation
  • Ans. 

    Heat of formation is the energy released or absorbed when one mole of a compound is formed from its elements in their standard states.

    • Heat of formation is also known as standard enthalpy of formation.

    • It is typically measured in units of kJ/mol.

    • Negative heat of formation indicates exothermic reaction, while positive heat of formation indicates endothermic reaction.

    • For example, the heat of formation of water (H2O) is -28

  • Answered by AI
  • Q2. What is heat of reaction
  • Ans. 

    Heat of reaction is the amount of heat released or absorbed during a chemical reaction.

    • Heat of reaction can be exothermic (heat released) or endothermic (heat absorbed).

    • It is typically measured in units of joules or calories.

    • Examples include combustion reactions releasing heat and photosynthesis reactions absorbing heat.

  • Answered by AI

Interview Questionnaire 

2 Questions

  • Q1. What are your strengths weakness?
  • Q2. Past internship experience?

Interview Preparation Tips

Interview preparation tips for other job seekers - It was good very interactive.

I applied via Campus Placement and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Aptitude Test 

Basic aptitude and technical e

Round 2 - One-on-one 

(1 Question)

  • Q1. Technical and hr interview

Interview Preparation Tips

Interview preparation tips for other job seekers - learn the basic concepts of your favourite subjects and prepare of general aptitude.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Reasoning

Round 3 - Technical 

(1 Question)

  • Q1. Pump related quesstion , project related question , zero order reaction examples , distillation types etc

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare well of core subjects like mass transfer, chemical reaction engineering etc
first they will ask for introduction , then they go through from your resume and ask project related question. Specifical read about steam distillation and its examples , zero order and 1 order reaction examples and be confident during the interview
Round 1 - Aptitude Test 

Basic aptitude and technical questions.

Round 2 - One-on-one 

(1 Question)

  • Q1. Technical and hr interview

Interview Preparation Tips

Interview preparation tips for other job seekers - clear the basic concepts. Questions asked from your core subjects like from thermodynamic, IC engine, etc.
Contribute & help others!
anonymous
You can choose to be anonymous

Dhampur Sugar Mills Interview FAQs

How many rounds are there in Dhampur Sugar Mills Graduate Engineer Trainee (Get) interview?
Dhampur Sugar Mills interview process usually has 1 rounds. The most common rounds in the Dhampur Sugar Mills interview process are Technical.

Recently Viewed

INTERVIEWS

Hewlett Packard Enterprise

No Interviews

INTERVIEWS

Hewlett Packard Enterprise

No Interviews

INTERVIEWS

Reliance Industries

No Interviews

CAMPUS PLACEMENT

Harcourt Butler Technology Institute, Kanpur

INTERVIEWS

NableIT Consultancy Services

No Interviews

INTERVIEWS

Hewlett Packard Enterprise

No Interviews

INTERVIEWS

Futures First info Services

No Interviews

INTERVIEWS

Hemani Industries

No Interviews

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

Sedemac Mechatronics

No Interviews

Tell us how to improve this page.

Dhampur Sugar Mills Graduate Engineer Trainee (Get) Salary
based on 23 salaries
₹2 L/yr - ₹2.2 L/yr
42% less than the average Graduate Engineer Trainee (Get) Salary in India
View more details

Dhampur Sugar Mills Graduate Engineer Trainee (Get) Reviews and Ratings

based on 10 reviews

3.4/5

Rating in categories

2.8

Skill development

2.5

Work-life balance

2.1

Salary

1.8

Job security

2.3

Company culture

2.2

Promotions

2.2

Work satisfaction

Explore 10 Reviews and Ratings
Assistant Manager
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Graduate Engineer Trainee (Get)
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
22 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Instrument Engineer
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Section Leader
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Dhampur Sugar Mills with

Balrampur Chini Mills

4.0
Compare

Triveni Engineering & Industries

4.1
Compare

Dwarikesh Sugar Industries

4.3
Compare

Bajaj Hindusthan

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent