AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Denso Haryana Private Limited, Plant 1 Senior Associate Interview Questions and Answers
Denso Haryana Private Limited, Plant 1 Senior Associate Interview Experiences
1 interview found
Anonymous
Selected
I applied via Campus Placement and was interviewed before Aug 2022. There were 3 interview rounds.
1. Asked about recent studies.
2. If selected than how will you give your best.
3. What's your hobbies. Etc
(1 Question)
- Q1. 1. Maths solving problems. 2. Science questions of class 8th, 9th and 10th. Have to pass the Test and you are selected.
Interview Preparation Tips
No job security.
Bad working environment.
Have to do overtime.
Lot's of night shifts.
Food of night shifts are not good.
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed in Jul 2019. There were 3 interview rounds.
Interview Questionnaire
5 Questions
- Q1. What's process engineering works
- Ans.
Process engineering involves designing, optimizing, and managing industrial processes to improve efficiency and productivity.
Process engineering focuses on analyzing and improving processes in various industries such as manufacturing, chemical, and pharmaceutical.
It involves identifying bottlenecks, reducing waste, and implementing process improvements to enhance productivity.
Process engineers use tools like process fl...
- Q2. What's the difference between cp and pp
- Ans.
cp and pp are both commands in Unix-like operating systems, but they have different functionalities.
cp stands for 'copy' and is used to copy files or directories from one location to another.
pp stands for 'print and pause' and is used to print files with pagination, pausing after each page.
cp can be used to create a duplicate of a file or directory, while pp is used for printing files in a controlled manner.
Example: cp...
- Q3. What's control plan
- Ans.
A control plan is a documented procedure that outlines the steps and measures taken to ensure quality and consistency in a manufacturing process.
Control plans are commonly used in industries such as automotive, aerospace, and electronics.
They include details on the process steps, key characteristics, measurement methods, and acceptable tolerances.
Control plans help identify potential risks, prevent defects, and ensure ...
- Q4. What's smed
- Ans.
SMED stands for Single Minute Exchange of Die. It is a lean manufacturing technique used to reduce the time it takes to change over a production process.
SMED is used to minimize downtime during changeovers
It focuses on separating internal and external setup tasks
The goal is to convert as many internal setup tasks to external setup tasks
By reducing setup time, production flexibility and efficiency are improved
- Q5. What's capex
- Ans.
Capex stands for capital expenditure, which refers to the funds used by a company to acquire, upgrade, or maintain physical assets.
Capex is an investment made by a company to purchase or improve long-term assets such as buildings, equipment, or technology.
It is different from operational expenses (opex) which are ongoing costs to run the business.
Capex is typically planned and budgeted for in advance.
Examples of capex ...
Interview Preparation Tips
Skills evaluated in this interview
I applied via Walk-in and was interviewed in May 2022. There were 4 interview rounds.
(3 Questions)
- Q1. Production related questions
- Q2. Working flow rated questions
- Q3. Any other factory related
(1 Question)
- Q1. Salary related questions
Interview Preparation Tips
(2 Questions)
- Q1. What is HPDC process
- Ans.
HPDC stands for High Pressure Die Casting, a process used to produce complex metal parts by injecting molten metal into a mold under high pressure.
HPDC involves injecting molten metal into a steel mold cavity at high pressure.
The high pressure helps in filling the mold quickly and accurately, resulting in high precision parts.
This process is commonly used in automotive, aerospace, and electronics industries for produci...
- Q2. Cost saving projects
(2 Questions)
- Q1. What is phase of APQP
- Ans.
APQP stands for Advanced Product Quality Planning, which is a phase-based approach to product development in the automotive industry.
APQP consists of five phases: Planning, Product Design, Process Design, Product and Process Validation, and Feedback and Continuous Improvement.
Each phase has specific deliverables and activities that must be completed before moving on to the next phase.
For example, in the Product Design ...
- Q2. EXPLAIN IATF AND HOW ITS WORK FOR AUTOMOTIVE INDUSTRY
- Ans.
IATF (International Automotive Task Force) is a global organization that develops and maintains quality management standards for the automotive industry.
IATF collaborates with automotive manufacturers to create unified quality standards
IATF 16949 is the latest version of the standard, focusing on continuous improvement and defect prevention
Certification to IATF standards is often required for suppliers to automotive OE
Interview Preparation Tips
they gives 1st prefrence ref. candidate
Rahul Y
The first was a technical screening, where I was asked to solve coding problems on a shared platform. The questions tested my ability to think on my feet, focusing on optimizing solutions and writing clean, maintainable code.
This was more interactive, involving a whiteboard session where I had to design a system from scratch. The interviewer challenged my assumptions and pushed me to consider edge cases, scalability, and performance. It was intense, but it made me appreciate the importance of clear, structured thinking.
(1 Question)
- Q1. There was a behavioral interview where I was asked about my past experiences, teamwork, and how I handled challenges. This round emphasized the company’s culture and how I might fit into their team.
(1 Question)
- Q1. 5S , LINE BALACING, KAIZEN ,FMEA
Interview Preparation Tips
Interview Questionnaire
4 Questions
- Q1. Difference between VA & VE
- Ans.
VA is value analysis, while VE is value engineering. Both are cost-saving techniques used in product development.
VA is a systematic review of a product's components and functions to identify areas where cost can be reduced without affecting performance.
VE is a more comprehensive approach that involves rethinking the entire product design to achieve cost savings while improving performance.
VA is typically used in the ea...
- Q2. How to calculate cost of the plastic molding components
- Ans.
The cost of plastic molding components can be calculated by considering factors such as material cost, tooling cost, labor cost, and overhead cost.
Determine the material cost per unit of the component
Calculate the tooling cost, which includes the cost of the mold and any necessary equipment
Factor in the labor cost, which includes the cost of operating the molding machine and any necessary labor for finishing and assemb...
- Q3. Name some polymers
- Ans.
Polymers are large molecules made up of repeating units called monomers. They have a wide range of applications in various fields.
Polyethylene
Polypropylene
Polyvinyl chloride
Polystyrene
Polyester
Polyurethane
Nylon
Teflon
Silicone
Rubber
- Q4. System audits
Interview Preparation Tips
Selected
I applied via Referral and was interviewed before Mar 2022. There were 2 interview rounds.
(3 Questions)
- Q1. Mat dena interview, bekaar company hai
- Ans. Join karni hai to minimum 40 % pe karna baad mein koi increment nai hai aur written mein lena offer letter mein bhi. je baad mein mukaar jaate hai
- Q2. Bhai lala company hai
- Q3. No feasility except HR
Interview Preparation Tips
General aptitude test
(2 Questions)
- Q1. By CAD software
- Q2. Drawing knowledge
(1 Question)
- Q1. About your self
(1 Question)
- Q1. Academic knowledge
Interview Preparation Tips
Denso Haryana Private Limited, Plant 1 Interview FAQs
Tell us how to improve this page.
Denso Haryana Private Limited, Plant 1 Interviews By Designations
- Denso Haryana Private Limited, Plant 1 Quality Inspector Interview Questions
- Denso Haryana Private Limited, Plant 1 Senior Associate Interview Questions
- Denso Haryana Private Limited, Plant 1 Mould Maintanace Interview Questions
- Denso Haryana Private Limited, Plant 1 HR Supervisor Interview Questions
- Denso Haryana Private Limited, Plant 1 Assembly Operator Interview Questions
- Denso Haryana Private Limited, Plant 1 Line Leader Interview Questions
- Denso Haryana Private Limited, Plant 1 Engineer Trainee Interview Questions
- Denso Haryana Private Limited, Plant 1 Associate Interview Questions
- Show more
Interview Questions for Popular Designations
- Associate Interview Questions
- Associate Software Engineer Interview Questions
- Associate Consultant Interview Questions
- Process Associate Interview Questions
- Associate Engineer Interview Questions
- Business Development Associate Interview Questions
- Research Associate Interview Questions
- Customer Service Associate Interview Questions
- Show more
Denso Haryana Private Limited, Plant 1 Senior Associate Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
Denso Haryana Private Limited, Plant 1 Senior Associate Reviews and Ratings
based on 1 review
Rating in categories
|
Assistant Manager
53
salaries
|  ₹7.7 L/yr - ₹16 L/yr |
|
Deputy Manager
41
salaries
| ₹11.3 L/yr - ₹20.2 L/yr |
|
Senior Engineer
20
salaries
| ₹5.5 L/yr - ₹9.6 L/yr |
|
Manager
15
salaries
| ₹15 L/yr - ₹27 L/yr |
|
Associate
13
salaries
| ₹1.5 L/yr - ₹9.2 L/yr |
Knorr-Bremse
Greaves Cotton
Sanden Vikas
Victora Auto Private Limited
- Home >
- Interviews >
- Denso Haryana Private Limited, Plant 1 Interview Questions >
- Denso Haryana Private Limited, Plant 1 Senior Associate Interview Questions
