Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Deccan Fine Chemicals Team. If you also belong to the team, you can get access from here

Deccan Fine Chemicals Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Deccan Fine Chemicals Interview Questions, Process, and Tips

Updated 1 Mar 2025

Top Deccan Fine Chemicals Interview Questions and Answers

View all 67 questions

Deccan Fine Chemicals Interview Experiences

Popular Designations

75 interviews found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Technical 

(4 Questions)

  • Q1. Normal basics of chemical engineering questions like distillation,pumps, filters,dryers
  • Q2. Which method to find no of plates in distillation column?
  • Ans. 

    The number of plates in a distillation column can be found using the McCabe-Thiele method.

    • The McCabe-Thiele method involves constructing a graph of the distillation process and determining the number of theoretical plates required for separation.

    • The method takes into account the vapor-liquid equilibrium data and the reflux ratio of the column.

    • The number of plates can also be estimated using empirical correlations or si...

  • Answered by AI
  • Q3. What is Net postive suction head?
  • Ans. 

    Net Positive Suction Head (NPSH) is the difference between the absolute pressure at the suction of the pump and the vapor pressure of the liquid.

    • NPSH is a critical parameter in pump design and operation.

    • It determines whether the pump will cavitate or not.

    • Cavitation can cause damage to the pump and reduce its efficiency.

    • NPSH is affected by factors such as fluid properties, pump speed, and suction piping design.

    • NPSH can ...

  • Answered by AI
  • Q4. What is Agitated nutsche filter dryer
  • Ans. 

    An Agitated Nutsche Filter Dryer is a type of equipment used for solid-liquid separation and drying of pharmaceuticals, chemicals, and food products.

    • It is a batch filter with a mechanical agitation system

    • It is used for filtration, washing, and drying of solids

    • It is commonly used in the pharmaceutical industry for the production of antibiotics and other drugs

    • It is also used in the chemical industry for the production of...

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. What is dryer and its types?
  • Ans. 

    A dryer is a device used to remove moisture or water content from a substance or material.

    • There are several types of dryers, including air dryers, rotary dryers, spray dryers, and freeze dryers.

    • Air dryers use hot air to remove moisture from materials.

    • Rotary dryers use rotating drums to dry substances.

    • Spray dryers use a spray nozzle to atomize liquid into a hot drying medium.

    • Freeze dryers freeze materials and then remov...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company related to automation and career growth

Senior Process Engineer Interview Questions asked at other Companies

Q1. Which method to find no of plates in distillation column?
View answer (2)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I was interviewed in Dec 2024.

Round 1 - Technical 

(5 Questions)

  • Q1. What is the working principle of shaft balancing in accordance with ISO 21940-11 and ISO 21940-12 standards?
  • Ans. 

    Shaft balancing in accordance with ISO 21940-11 and ISO 21940-12 standards involves reducing vibrations by adjusting the mass distribution along the shaft.

    • Shaft balancing aims to minimize vibrations in rotating machinery by adjusting the mass distribution along the shaft.

    • ISO 21940-11 specifies the balancing process for rigid rotors, while ISO 21940-12 covers the balancing of flexible rotors.

    • Balancing involves adding or...

  • Answered by AI
  • Q2. What does equipment alignment entail?
  • Ans. 

    Equipment alignment involves ensuring that all components of a machine are properly positioned and oriented to work efficiently and accurately.

    • Ensuring that all parts of the equipment are correctly positioned relative to each other

    • Checking and adjusting the alignment of shafts, belts, gears, and other components

    • Using precision tools such as laser alignment systems to achieve accurate alignment

    • Proper alignment helps pre...

  • Answered by AI
  • Q3. Following ASME section ix
  • Q4. Following ASME section v
  • Q5. Following ASME B31.3

Interview Preparation Tips

Interview preparation tips for other job seekers - Engineering service inspection.

Diploma Mechanical Engineer Interview Questions asked at other Companies

Q1. What is the second law of thermodynamics?
View answer (14)
Deccan Fine Chemicals Interview Questions and Answers for Freshers
illustration image
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
-

I was interviewed in Dec 2024.

Round 1 - One-on-one 

(5 Questions)

  • Q1. What is API STD 610
  • Ans. 

    API STD 610 is a standard for centrifugal pumps for petroleum, petrochemical, and natural gas industries.

    • API STD 610 specifies requirements for centrifugal pumps used in the petroleum, petrochemical, and natural gas industries.

    • It covers design, materials, testing, and performance of centrifugal pumps.

    • The standard also includes guidelines for pump selection, installation, operation, and maintenance.

    • API STD 610 helps ens...

  • Answered by AI
  • Q2. Why are you use API 510
  • Ans. 

    API 510 is used for pressure vessel inspection and maintenance in accordance with industry standards.

    • API 510 is a widely recognized standard for the inspection, repair, alteration, and rerating of pressure vessels.

    • It ensures that pressure vessels are maintained in a safe and reliable condition.

    • By following API 510 guidelines, maintenance engineers can ensure compliance with industry standards and regulations.

    • Using API ...

  • Answered by AI
  • Q3. What are you used fillar gauge
  • Ans. 

    A filler gauge is a tool used to measure the gap between two objects.

    • Filler gauges are commonly used in maintenance to check clearances between parts

    • They are typically made of a set of thin metal blades of varying thickness

    • The user selects the appropriate blade that fits snugly in the gap being measured

    • Filler gauges are useful for ensuring proper tolerances in machinery and equipment

  • Answered by AI
  • Q4. How many are you being least count diameter
  • Ans. 

    The least count diameter refers to the smallest increment that can be measured on a diameter scale.

    • Least count diameter is the smallest division that can be measured on a diameter scale.

    • It is typically determined by the precision of the measuring instrument being used.

    • For example, if a micrometer has a least count of 0.01 mm, it means that it can measure diameter increments in 0.01 mm intervals.

  • Answered by AI
  • Q5. How many are you parts bearing
  • Ans. 

    I am responsible for maintaining and repairing various parts in the machinery and equipment.

    • I am familiar with the different types of bearings used in machinery such as ball bearings, roller bearings, and sleeve bearings.

    • I have experience in troubleshooting and replacing faulty bearings to ensure smooth operation of the equipment.

    • I work closely with the procurement team to ensure we have an adequate supply of bearings ...

  • Answered by AI

Maintenance Engineer Interview Questions asked at other Companies

Q1. 1)which refrigeration cycle used in chilling plant?
View answer (9)

Electrical Technician Interview Questions & Answers

user image PATEL DIPAK HASMUKH BHAI

posted on 24 Dec 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Newspaper Ad

Round 1 - Technical 

(2 Questions)

  • Q1. Chemical plant Electrical Related
  • Q2. All over Electrical maintenance supervisor relative

Interview Preparation Tips

Interview preparation tips for other job seekers - Excellent work Excellent all' overall

Electrical Technician Interview Questions asked at other Companies

Q1. Preventive Maintenance of All Kinds of H.V & LV Breakers, Motors, Voltage Up To 33 KV & 11 KV & 6.6.KV /2400 KW ,Transformer(15.75KV /230 KV ), Corrective Maintenance of HV/MV /LV Switches gears,VCB,ACB,MOCB,SF6 Breakers, Breake... read more
View answer (4)

Deccan Fine Chemicals interview questions for popular designations

 Process Engineer

 (8)

 Operations Engineer

 (5)

 Graduate Trainee

 (3)

 Graduate Engineer Trainee (Get)

 (3)

 QC Chemist

 (2)

 Maintenance Engineer

 (2)

 Shift Engineer

 (2)

 Senior Executive

 (2)

Interview experience
1
Bad
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - One-on-one 

(3 Questions)

  • Q1. Hard work done as helper
  • Q2. Yes can u as helper
  • Q3. Treat like grammar

Interview Preparation Tips

Interview preparation tips for other job seekers - No one be recommended

Shift Incharge Interview Questions asked at other Companies

Q1. Tell me about power factor and how to keep always .80?
View answer (5)

Get interview-ready with Top Deccan Fine Chemicals Interview Questions

Interview Questions & Answers

user image Anonymous

posted on 18 Sep 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Aug 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What are you bearing
  • Q2. What are you mechanical seal
  • Ans. 

    Mechanical seals are devices that help prevent leakage between two surfaces in relative motion.

    • Mechanical seals are commonly used in pumps, compressors, and other rotating equipment to prevent leakage of fluids.

    • They consist of two main parts - a stationary element and a rotating element, which are held together by tension to create a seal.

    • The seal faces are typically made of materials like carbon, ceramic, or tungsten ...

  • Answered by AI
  • Q3. How much are bearing parts
  • Ans. 

    The cost of bearing parts can vary depending on the type, size, and quality of the bearing.

    • Bearing parts can range from a few dollars to hundreds of dollars, depending on the specific requirements.

    • Factors such as material, size, precision, and brand can all impact the cost of bearing parts.

    • For example, a standard ball bearing for a small appliance may cost around $5, while a high-precision ceramic bearing for a special...

  • Answered by AI
  • Q4. What are the predictive maintenance
  • Ans. 

    Predictive maintenance involves using data and analytics to predict when equipment failure may occur, allowing for timely maintenance to prevent breakdowns.

    • Uses data and analytics to predict when equipment failure may occur

    • Helps in scheduling maintenance activities before breakdowns occur

    • Reduces downtime and increases equipment reliability

    • Examples include vibration analysis, oil analysis, and thermography

  • Answered by AI
  • Q5. What are you use ISO 28721-1.2019 code
  • Ans. 

    ISO 28721-1.2019 is a code used for establishing a framework for implementing reliability-centered maintenance (RCM) in engineering.

    • ISO 28721-1.2019 provides guidelines for developing maintenance strategies based on reliability-centered maintenance principles.

    • It helps in identifying the most effective maintenance tasks to ensure equipment reliability and safety.

    • The code outlines the process of analyzing potential failu...

  • Answered by AI

Jobs at Deccan Fine Chemicals

View all
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Mar 2024.

Round 1 - Group Discussion 

Women empowerment and india economy on daily basis

Round 2 - Technical 

(2 Questions)

  • Q1. What is HIRA and HAZOP
  • Ans. 

    HIRA stands for Hazard Identification and Risk Assessment, while HAZOP stands for Hazard and Operability Study.

    • HIRA is a systematic process for identifying hazards and assessing risks associated with a process or operation.

    • HAZOP is a structured and systematic examination of a planned or existing process or operation to identify and evaluate problems that may represent risks to personnel or equipment.

    • HIRA involves ident...

  • Answered by AI
  • Q2. How do given mock drill in workplace

Process Safety Engineer Interview Questions asked at other Companies

Q1. what is HIRA and HAZOP
View answer (1)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is PRA and how to do the PRA.

Interview Preparation Tips

Interview preparation tips for other job seekers - A good company to consider and join.

Process Safety Engineer Interview Questions asked at other Companies

Q1. what is HIRA and HAZOP
View answer (1)
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Sepatation technics
  • Q2. How to calculate number of theotitical plates
  • Ans. 

    Number of theoretical plates can be calculated using the plate theory or the distillation column design equation.

    • The plate theory method involves using the equilibrium data for the components being separated and the operating conditions of the column.

    • The distillation column design equation method involves using the height equivalent to a theoretical plate (HETP) and the total number of plates in the column.

    • Example: For...

  • Answered by AI

Production Graduate Engineer Trainee Interview Questions asked at other Companies

Q1. PRINCIPLE ON WHICH HEAT TRANSFER WORKS (ALL PHASES)
View answer (1)
Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is favourite subject
  • Q2. How inter related to pratical knowledge and theoretical knowledge
Round 2 - HR 

(2 Questions)

  • Q1. BRIEFLY EXPLAIN Ur family details
  • Q2. Why did you here

Interview Preparation Tips

Interview preparation tips for other job seekers - Good basic knowledge

Top Deccan Fine Chemicals Process Engineer Interview Questions and Answers

Q1. What are the reasons behind distillate product purity( under same column and feed and operating condistions)
View answer (1)

Process Engineer Interview Questions asked at other Companies

Q1. What is APQP and where is it used. And how many phases does it have? and fmea which phase are performed?
View answer (2)
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. No idea sir depending on our skills
  • Q2. Are you fresher or any experience
  • Ans. 

    I am a fresher with no prior experience in the field.

    • I recently graduated with a degree in Chemistry and am eager to apply my knowledge in a professional setting.

    • While I may not have direct experience in production chemistry, I have completed relevant coursework and projects during my studies.

    • I am a quick learner and am confident in my ability to adapt to new challenges and responsibilities.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Asking to any work experience

Production Chemist Interview Questions asked at other Companies

Q1. What is the caps and change control
View answer (21)
Contribute & help others!
anonymous
You can choose to be anonymous

Deccan Fine Chemicals Interview FAQs

How many rounds are there in Deccan Fine Chemicals interview?
Deccan Fine Chemicals interview process usually has 1-2 rounds. The most common rounds in the Deccan Fine Chemicals interview process are Technical, HR and Resume Shortlist.
How to prepare for Deccan Fine Chemicals interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Deccan Fine Chemicals. The most common topics and skills that interviewers at Deccan Fine Chemicals expect are DCS, Reactors, Centrifuge, Production and SSR.
What are the top questions asked in Deccan Fine Chemicals interview?

Some of the top questions asked at the Deccan Fine Chemicals interview -

  1. Which method to find no of plates in distillation colu...read more
  2. What are the reasons behind distillate product purity( under same column and fe...read more
  3. How to increase the existing scrubber capacity to cope up with new higher capac...read more
How long is the Deccan Fine Chemicals interview process?

The duration of Deccan Fine Chemicals interview process can vary, but typically it takes about less than 2 weeks to complete.

Recently Viewed

INTERVIEWS

Amara Raja Group

No Interviews

INTERVIEWS

Mindbrink Media Pulse

No Interviews

INTERVIEWS

Deccan Fine Chemicals

No Interviews

INTERVIEWS

Deccan Fine Chemicals

No Interviews

JOBS

Motilal Oswal Financial Services

No Jobs

SALARIES

Motilal Oswal Financial Services

INTERVIEWS

Digimetrix Technologies

No Interviews

INTERVIEWS

Amara Raja Group

No Interviews

INTERVIEWS

Amara Raja Group

No Interviews

INTERVIEWS

Deccan Fine Chemicals

No Interviews

Tell us how to improve this page.

Deccan Fine Chemicals Interview Process

based on 91 interviews

Interview experience

4.1
  
Good
View more

Interview Questions from Similar Companies

Aarti Industries Interview Questions
4.1
 • 282 Interviews
UPL Interview Questions
4.1
 • 175 Interviews
Atul Interview Questions
3.9
 • 83 Interviews
BASF Interview Questions
4.4
 • 31 Interviews
Vinati Organics Interview Questions
4.0
 • 12 Interviews
View all

Deccan Fine Chemicals Reviews and Ratings

based on 781 reviews

3.7/5

Rating in categories

3.6

Skill development

3.5

Work-life balance

3.7

Salary

3.6

Job security

3.3

Company culture

3.4

Promotions

3.4

Work satisfaction

Explore 781 Reviews and Ratings
Sr Engineer/Asst Manager - Projects

Tuni

7-12 Yrs

Not Disclosed

Mechanical Maintenance Engineer

Tuni

3-8 Yrs

₹ 2-6 LPA

Explore more jobs
Junior Engineer
342 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Process Engineer
172 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
140 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
131 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Chemist
111 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Deccan Fine Chemicals with

Aarti Industries

4.1
Compare

Vinati Organics

4.0
Compare

Atul

3.9
Compare

Navin Fluorine International

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent