Filter interviews by
I applied via Naukri.com and was interviewed before Jun 2022. There were 3 interview rounds.
Top trending discussions
I applied via Walk-in and was interviewed before Oct 2020. There were 3 interview rounds.
posted on 5 Sep 2021
I applied via Naukri.com and was interviewed in Mar 2021. There were 3 interview rounds.
posted on 14 Dec 2023
I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 4 interview rounds.
I worked at XYZ Company, a manufacturing firm specializing in automotive components.
Responsible for conducting preventive maintenance on production machinery
Troubleshoot and repair mechanical issues on equipment
Collaborated with production team to ensure minimal downtime
Implemented new maintenance procedures to improve efficiency
Yes, I am willing to relocate or commute daily for the job.
I am open to relocating for the right opportunity.
I am willing to commute daily if necessary.
I understand the importance of flexibility in the job market.
I have handled a wide range of equipment in my role as a Mechanical Maintenance Engineer.
Pumps and compressors
Conveyors and material handling equipment
Boilers and heat exchangers
HVAC systems
Generators and power distribution systems
Machine tools and production equipment
Hydraulic and pneumatic systems
Crane and lifting equipment
Instrumentation and control systems
When opening a centrifugal pump, it is important to follow proper procedures to ensure safety and prevent damage.
Before opening the pump, ensure that it is isolated from the power source and all pressure has been relieved.
Inspect the pump for any signs of damage or wear, such as leaks, cracks, or excessive vibration.
Check the pump's impeller and casing for any debris or blockages that may affect its performance.
If nece...
Vacuum is created in a steam ejector through the principle of jet propulsion.
Steam ejectors use high-pressure steam to create a low-pressure environment.
The steam enters the nozzle of the ejector and expands, creating a high-velocity jet.
This high-velocity jet entrains and compresses the surrounding gas or vapor, reducing its pressure.
The entrained gas or vapor is then discharged through the diffuser, creating a vacuum...
1 torr is equal to 0.03937 mm of Hg.
1 torr is a unit of pressure equal to 1/760th of standard atmospheric pressure.
mm of Hg is a unit of pressure commonly used in vacuum systems.
To convert torr to mm of Hg, multiply by 0.03937.
Example: 1 torr = 1 * 0.03937 mm of Hg = 0.03937 mm of Hg.
759 mm of hg is a unit of pressure measurement.
mm of hg is a common unit used to measure pressure.
759 mm of hg is equivalent to 1012.8 millibars or 14.1 pounds per square inch (psi).
It is often used in meteorology to measure atmospheric pressure.
In mechanical maintenance, it can be used to monitor pressure in systems or equipment.
For example, if a pressure gauge reads 759 mm of hg, it indicates the pressure exerted by
In a clean room area, parameters observed include air quality, temperature, humidity, particle count, and pressure differentials.
Air quality is monitored to ensure low levels of contaminants.
Temperature is controlled to maintain a stable environment for sensitive equipment.
Humidity levels are regulated to prevent moisture-related issues.
Particle count is measured to ensure cleanliness and prevent contamination.
Pressure...
Mechanical seal types include cartridge seals, component seals, and bellows seals.
Cartridge seals are pre-assembled units that are easy to install and replace.
Component seals are made up of separate rotating and stationary parts.
Bellows seals use a flexible metal bellows to provide a dynamic seal.
Heat transfer is the movement of thermal energy from one object to another. There are three modes of heat transfer: conduction, convection, and radiation.
Conduction is the transfer of heat through a material without any movement of the material itself. Example: Touching a hot stove.
Convection is the transfer of heat through the movement of fluids (liquids or gases). Example: Boiling water.
Radiation is the transfer of h...
I applied via Referral and was interviewed in Jan 2021. There were 3 interview rounds.
I applied via Campus Placement and was interviewed before Oct 2020. There were 4 interview rounds.
Series reactors are used in transmission lines to limit the flow of current and improve system stability.
Series reactors are used to limit the flow of current in a transmission line.
They improve system stability by reducing voltage fluctuations and power surges.
They can also be used to compensate for line capacitance and improve power factor.
Examples of series reactors include air-core reactors, iron-core reactors, and...
Yes, core loss depends upon frequency.
Core loss is the energy lost in the magnetic core of a transformer or inductor.
It is caused by hysteresis and eddy current losses.
Hysteresis loss is proportional to the frequency and magnetic flux density.
Eddy current loss is proportional to the square of the frequency and the thickness of the core.
Higher frequency leads to higher core loss, which can cause overheating and reduced
posted on 11 Jan 2025
I applied via Campus Placement and was interviewed before Jan 2024. There was 1 interview round.
A bearing is a machine element that allows one part to rotate or move freely relative to another part.
Bearing reduces friction between moving parts
Common types include ball bearings, roller bearings, and plain bearings
Used in various applications such as automotive, industrial machinery, and household appliances
My hobby is woodworking, where I enjoy creating furniture and home decor items.
Woodworking is a creative outlet for me
I enjoy designing and building furniture pieces
I like working with different types of wood and finishes
Gear box failure can be caused by various reasons such as lack of lubrication, overheating, worn out gears, or improper maintenance.
Lack of lubrication causing increased friction and wear on gears
Overheating leading to thermal expansion and distortion of gears
Worn out gears due to prolonged usage without replacement
Improper maintenance such as infrequent oil changes or ignoring warning signs
The type of lubricant used depends on the specific equipment and application, such as grease for bearings or oil for gears.
Consider the operating conditions of the equipment, such as temperature and load
Choose the appropriate viscosity and additives for the specific application
Regularly monitor and maintain the lubricant levels to ensure optimal performance
Examples: grease for bearings, oil for gears, silicone lubrican
The type of conveyor belt used in the maintenance process.
Rubber conveyor belts are commonly used for general maintenance purposes.
Steel conveyor belts are used for heavy-duty applications.
Modular plastic conveyor belts are used for food processing and packaging.
posted on 18 Aug 2022
I applied via Approached by Company and was interviewed in Jun 2022. There were 5 interview rounds.
based on 1 interview
Interview experience
based on 3 reviews
Rating in categories
Assistant Manager
366
salaries
| ₹3.9 L/yr - ₹13.1 L/yr |
Senior Officer
193
salaries
| ₹3 L/yr - ₹9.1 L/yr |
Deputy Manager
183
salaries
| ₹6 L/yr - ₹18 L/yr |
Retail Store Manager
170
salaries
| ₹1.2 L/yr - ₹5.2 L/yr |
Executive Supervisor
120
salaries
| ₹2.5 L/yr - ₹5.2 L/yr |
Aarti Industries
UPL
PI Industries
Rallis India