Premium Employer

i

This company page is being actively managed by Core Energy Systems Limited Team. If you also belong to the team, you can get access from here

Core Energy Systems Limited Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Core Energy Systems Limited Electrical Site Engineer Interview Questions and Answers

Updated 7 Sep 2022

Core Energy Systems Limited Electrical Site Engineer Interview Experiences

1 interview found

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. What is tranformer? Transformer is a statics device and x-mer working mutual induction and x-mer voltage convert step up and step down.
  • Ans. 

    A transformer is a static device that uses mutual induction to convert voltage levels.

    • Transformers are used to increase or decrease the voltage in electrical circuits.

    • They consist of two or more coils of wire, known as windings, that are wound around a core.

    • The primary winding is connected to the input voltage source, while the secondary winding is connected to the load.

    • When an alternating current flows through the pri...

  • Answered by AI
  • Q2. What is cilica gel.? Cilica gel is x-mer in moisture absorbed
  • Ans. 

    Silica gel is a desiccant that absorbs moisture to keep things dry.

    • Silica gel is a porous, granular form of silicon dioxide.

    • It is commonly used in packaging to prevent moisture damage to products.

    • It can also be found in humidifiers, dehumidifiers, and air conditioning systems.

    • Silica gel changes color as it absorbs moisture, indicating when it needs to be replaced.

    • It is non-toxic and safe to handle.

  • Answered by AI
  • Q3. What is x-mer oil? X-mer oil is cooling generation of coil
  • Ans. 

    X-mer oil is a type of cooling oil used in transformers to dissipate heat generated by the coil.

    • X-mer oil is a mineral oil with high dielectric strength and thermal conductivity.

    • It is used to cool the transformer coil and prevent overheating.

    • The oil also acts as an insulator to prevent electrical breakdown.

    • X-mer oil is typically tested for purity and quality to ensure proper functioning of the transformer.

    • Examples of X...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Dear sir enclosed herewith the myself cv for your kind perusal regard

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Number system and logiçal problem

Round 2 - Technical 

(2 Questions)

  • Q1. What is diode? Why use in circuit
  • Ans. 

    A diode is a semiconductor device that allows current to flow in one direction only. It is used in circuits to control the direction of current flow and to rectify AC to DC.

    • Diodes are used to protect circuits from reverse polarity, preventing damage to sensitive components.

    • They are used in rectifier circuits to convert AC voltage to DC voltage, such as in power supplies.

    • Diodes are also used in signal processing circuit...

  • Answered by AI
  • Q2. Flip flip explained and usage?
  • Ans. 

    A flip flop is a digital circuit that stores a single bit of data using two stable states.

    • Flip flops are used in digital electronics to store data and synchronize signals.

    • They can be edge-triggered or level-triggered.

    • Examples include D flip flop, JK flip flop, and T flip flop.

  • Answered by AI

I applied via Company Website and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. Ups, inverter, generator operator, electrical
  • Q2. Electrical diploma in AICTE
  • Q3. Any type of electrical
  • Ans. 

    Yes, I have experience working with various types of electrical systems.

    • I have worked with both AC and DC electrical systems.

    • I am familiar with electrical wiring and circuitry.

    • I have experience troubleshooting electrical issues and repairing faulty components.

    • I am knowledgeable about electrical safety protocols and regulations.

    • Examples of electrical systems I have worked with include lighting systems, HVAC systems, and

  • Answered by AI
  • Q4. Electrical knowledge
  • Q5. What is the role of electrical equipment.
  • Ans. 

    Electrical equipment plays a crucial role in powering and controlling various systems and processes.

    • Electrical equipment is responsible for generating, distributing, and controlling power in various industries.

    • It is used in a wide range of applications, from simple household appliances to complex industrial machinery.

    • Electrical equipment includes generators, transformers, motors, switches, and control systems.

    • It is ess...

  • Answered by AI
  • Q6. How are the generate electricity
  • Ans. 

    Electricity is generated through various methods including thermal, hydro, nuclear, and renewable sources.

    • Thermal power plants burn fossil fuels like coal, oil, and gas to generate steam that drives turbines to produce electricity.

    • Hydroelectric power plants use the force of falling water to turn turbines and generate electricity.

    • Nuclear power plants use nuclear reactions to heat water and produce steam that drives turb...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Indian Army Service Engineer interview:
  • Knowledge Management
  • Electricals
Interview preparation tips for other job seekers - Very dedicated work of my life so my trade work is mostly preferably to enyone
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Aug 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Good one it was easy and knowledgeable

Round 2 - Technical 

(3 Questions)

  • Q1. Explain about yourself
  • Ans. 

    I am a dedicated and experienced Electrical Engineer with a passion for problem-solving and innovation.

    • Graduated with a degree in Electrical Engineering from XYZ University

    • Worked for 5 years at ABC Company, specializing in power systems design

    • Proficient in CAD software and project management tools

    • Strong analytical and problem-solving skills

    • Completed several successful projects, including designing a new circuit board f

  • Answered by AI
  • Q2. What is a generator working principle
  • Ans. 

    A generator works on the principle of electromagnetic induction to convert mechanical energy into electrical energy.

    • Generators use a magnetic field and a conductor to create a flow of electrons, generating electricity.

    • The mechanical energy can come from various sources such as turbines, engines, or hand cranks.

    • Examples include hydroelectric generators, wind turbines, and diesel generators.

  • Answered by AI
  • Q3. What is working of actuator
  • Ans. 

    An actuator is a component of a machine that is responsible for moving or controlling a mechanism or system.

    • Actuators convert electrical signals into mechanical movement.

    • They can be used in various applications such as robotics, automotive systems, and industrial machinery.

    • Examples of actuators include solenoids, motors, and hydraulic cylinders.

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Explain about yourself
  • Ans. 

    I am a dedicated and experienced electrical engineer with a passion for problem-solving and innovation.

    • Graduated with a degree in Electrical Engineering from XYZ University

    • Have X years of experience working in the field, specializing in power systems

    • Proficient in using software such as AutoCAD and MATLAB for design and analysis

    • Led a team in implementing a new energy-efficient lighting system in a commercial building, r

  • Answered by AI
  • Q2. What are your strengths
  • Ans. 

    My strengths include problem-solving skills, attention to detail, and strong technical knowledge.

    • Strong problem-solving skills - able to analyze complex electrical systems and troubleshoot issues effectively

    • Attention to detail - ensuring accuracy in design and implementation of electrical projects

    • Strong technical knowledge - staying up-to-date with industry trends and advancements in electrical engineering

    • Effective com...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare your core topics well
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Difference between armature voltage control field control?
  • Ans. 

    Armature voltage control involves changing the voltage applied to the armature of a DC motor to control its speed, while field control involves changing the field current to control the motor's speed.

    • Armature voltage control adjusts the voltage applied to the armature winding of a DC motor to control its speed

    • Field control adjusts the field current in the motor to control its speed

    • Armature voltage control is more commo...

  • Answered by AI
  • Q2. Design a boost converter?
  • Ans. 

    A boost converter is a type of DC-DC converter that steps up the input voltage to a higher output voltage.

    • Use a switch (usually a MOSFET) to control the energy flow from input to output

    • Include an inductor to store and release energy

    • Add a diode to allow current flow in one direction

    • Use a capacitor to smooth out the output voltage

    • Implement a control circuit to regulate the output voltage

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong with the basics, having a good cgpa helps.

I appeared for an interview in Oct 2016.

Interview Questionnaire 

1 Question

  • Q1. Explain machine learning and how is cloud important?
  • Ans. 

    Machine learning is a branch of AI that enables computers to learn and make predictions without explicit programming.

    • Machine learning is a subset of artificial intelligence (AI) that focuses on developing algorithms and models that allow computers to learn from and make predictions or decisions based on data.

    • It involves training a model on a large dataset and using it to make predictions or decisions on new, unseen dat...

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: The question were not adaptive but it tested all the knowledge of c and database.
Tips: Be clear in your concepts

Round: Technical Interview
Experience: The questions were based on your resume.
Tips: Don't fake anything in your CV

Skills: Software Skills
College Name: Manipal Institute Of Technology, Manipal

Skills evaluated in this interview

Interview Questionnaire 

1 Question

  • Q1. How to do dialing?
  • Ans. 

    Dialing is the process of making a phone call by entering the phone number on a keypad or selecting a contact from the phonebook.

    • To dial a number, enter the digits on the keypad and press the call button.

    • To call a contact from the phonebook, select the contact and press the call button.

    • International calls require a country code before the phone number.

    • Emergency calls can be made without unlocking the phone or entering ...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

It is like gate exam paper more of electronics questions than programming languages. Here the programming language is c and embedded

Round 3 - Technical 

(5 Questions)

  • Q1. Basic level questions on c but indepth discussion on the academic projects.
  • Q2. Explain Compilation stages
  • Ans. 

    Compilation stages involve preprocessing, compilation, assembly, linking, and loading.

    • Preprocessing: Includes expanding macros, handling conditional compilation, and file inclusion.

    • Compilation: Translates source code into assembly code or machine code.

    • Assembly: Converts assembly code into object code.

    • Linking: Combines multiple object files and libraries into a single executable.

    • Loading: Loads the executable into memory

  • Answered by AI
  • Q3. Logics on bit wise operators
  • Ans. 

    Bitwise operators are used to perform operations at the bit level on binary numbers.

    • Bitwise AND (&) - sets a bit to 1 only if both input bits are 1

    • Bitwise OR (|) - sets a bit to 1 if either input bit is 1

    • Bitwise XOR (^) - sets a bit to 1 if the input bits are different

    • Bitwise NOT (~) - inverts all the bits

    • Left shift (<<) - shifts the bits to the left by a specified number of positions

    • Right shift (>>) - shifts the bits

  • Answered by AI
  • Q4. Understanding of pointers
  • Ans. 

    Pointers are variables that store memory addresses of other variables in programming languages like C and C++.

    • Pointers are used to store memory addresses of variables.

    • They allow direct manipulation of memory locations.

    • Pointers can be used to pass variables by reference.

    • Example: int *ptr; ptr = # *ptr = 10; // num now equals 10

  • Answered by AI
  • Q5. Volatile and non volatile keywords

Interview Preparation Tips

Interview preparation tips for other job seekers - Have deep understanding of the project. Then have good understanding of basic level concepts in c, embedded c ,8051 controller along with protocols like UART,I2C,SPI.

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. How to choose mosfet
  • Ans. 

    Choose a MOSFET based on voltage, current, power dissipation, switching speed, and package type.

    • Consider voltage and current requirements

    • Look at power dissipation and thermal considerations

    • Evaluate switching speed needed for the application

    • Choose the appropriate package type for mounting and heat dissipation

    • Check for additional features like built-in protection circuits

    • Example: For high power applications, choose a MOS

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell Us about yourself?
  • Q2. Tell us more about your family
Round 2 - Aptitude Test 

Psychometric Test, Behavioral Test

Core Energy Systems Limited Interview FAQs

How many rounds are there in Core Energy Systems Limited Electrical Site Engineer interview?
Core Energy Systems Limited interview process usually has 2 rounds. The most common rounds in the Core Energy Systems Limited interview process are Resume Shortlist and Technical.
What are the top questions asked in Core Energy Systems Limited Electrical Site Engineer interview?

Some of the top questions asked at the Core Energy Systems Limited Electrical Site Engineer interview -

  1. What is tranformer? Transformer is a statics device and x-mer working mutual in...read more
  2. What is cilica gel.? Cilica gel is x-mer in moisture absor...read more
  3. What is x-mer oil? X-mer oil is cooling generation of c...read more

Tell us how to improve this page.

Join Core Energy Systems Limited Engineering Nation's Core: Where Innovation Builds Tomorrow

Interview Questions from Similar Companies

Indian Army Interview Questions
4.7
 • 156 Interviews
Data Patterns Interview Questions
3.7
 • 48 Interviews
Aequs Interview Questions
3.6
 • 32 Interviews
Fldec Systems Interview Questions
3.6
 • 15 Interviews
View all

Core Energy Systems Limited Electrical Site Engineer Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

3.0

Salary

4.0

Job security

3.0

Company culture

3.0

Promotions

3.0

Work satisfaction

Explore 1 Review and Rating
Graduate Engineer
25 salaries
unlock blur

₹4 L/yr - ₹5 L/yr

Service Engineer
9 salaries
unlock blur

₹2.8 L/yr - ₹7 L/yr

Project Manager
9 salaries
unlock blur

₹8.2 L/yr - ₹18.5 L/yr

Project Engineer
9 salaries
unlock blur

₹4.5 L/yr - ₹6.5 L/yr

Site Engineer
8 salaries
unlock blur

₹3 L/yr - ₹4.3 L/yr

Explore more salaries
Compare Core Energy Systems Limited with

Indian Army

4.7
Compare

Indian Air Force

4.5
Compare

Tata Advanced Systems

3.7
Compare

Aequs

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview