Add office photos
Filter interviews by
Coperion Ideal Engineer Trainee Interview Questions and Answers
Coperion Ideal Engineer Trainee Interview Experiences
1 interview found
Selected
I applied via LinkedIn and was interviewed in Jun 2023. There were 4 interview rounds.
Written exam ( core chemical engineering questions,GA question and some HR questions)
60min duration
(3 Questions)
- Q1. Heat transfer- types of heat exchanger, shell and tube designing, baffles, fouling factor, material and feasible conditions of construction of heat exchanger etc
- Q2. Mass transfer; all about Distillation column
- Q3. Along with internship and B tech project explanation
(2 Questions)
- Q1. Some miscellaneous questions related to core chemical engineering
- Q2. Like pressure volume relationship. Thickness of heat exchanger if it will increase what happens to heat transfer rate etc
Interview Preparation Tips
- Heat Transfer
- Heat Exchangers
- Distillation Column
- Mass Transfer
Interview questions from similar companies
I applied via Naukri.com and was interviewed in Mar 2022. There were 2 interview rounds.
(3 Questions)
- Q1. How u create 3 modeling in design sofware
- Ans.
To create 3D models in design software, use tools like extrude, revolve, and loft.
Start by creating a 2D sketch of the object you want to model
Use the extrude tool to give the sketch depth and create a 3D object
Use the revolve tool to create a 3D object by rotating a 2D sketch around an axis
Use the loft tool to create a 3D object by blending two or more shapes together
Combine these tools to create complex 3D models
- Q2. What is the advantage of 3D modeling
- Ans.
3D modeling allows for visualization, simulation, and optimization of designs.
Enables designers to see the final product before production
Helps identify potential issues and make necessary changes
Allows for testing and simulation of different scenarios
Can improve communication and collaboration among team members
Can reduce costs and time in the design process
- Q3. For critical jobs which which angle of projection is important
- Ans.
The angle of projection that is important for critical jobs is the isometric projection.
Isometric projection is important for critical jobs as it provides a three-dimensional view of the object.
It allows for accurate measurements and analysis of the object's dimensions and angles.
Other types of projections, such as orthographic projection, may not provide enough detail for critical jobs.
For example, in engineering, iso...
Interview Preparation Tips
- GD AND T
- UG NX
- Prodect development
Skills evaluated in this interview
Engineer Trainee Interview Questions & Answers
Nelson Global Products
arvind lanke
posted on 20 Aug 2021
I applied via Walk-in and was interviewed before Aug 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Introduce yourself
Selected
I applied via Walk-in and was interviewed in Jun 2023. There were 3 interview rounds.
(1 Question)
- Q1. About ur family background Education Experience related
(2 Questions)
- Q1. About ur self About previous work experience knowledge If they stisfied with ur previous work experience they will ask indepth knowledge of ur work experience
- Q2. My self .......... I have 2 years work experience cnc machinery
Interview Preparation Tips
- CNC Turning
Finall round interview held by company gm
Production Trainee Interview Questions & Answers
Kyb Motorcycle Suspension
Anonymous
posted on 9 Dec 2024
Selected
I applied via Campus Placement and was interviewed before Dec 2023. There was 1 interview round.
(1 Question)
- Q1. Self introduction
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Mar 2022. There were 2 interview rounds.
(3 Questions)
- Q1. How u create 3 modeling in design sofware
- Ans.
To create 3D models in design software, use tools like extrude, revolve, and loft.
Start by creating a 2D sketch of the object you want to model
Use the extrude tool to give the sketch depth and create a 3D object
Use the revolve tool to create a 3D object by rotating a 2D sketch around an axis
Use the loft tool to create a 3D object by blending two or more shapes together
Combine these tools to create complex 3D models
- Q2. What is the advantage of 3D modeling
- Ans.
3D modeling allows for visualization, simulation, and optimization of designs.
Enables designers to see the final product before production
Helps identify potential issues and make necessary changes
Allows for testing and simulation of different scenarios
Can improve communication and collaboration among team members
Can reduce costs and time in the design process
- Q3. For critical jobs which which angle of projection is important
- Ans.
The angle of projection that is important for critical jobs is the isometric projection.
Isometric projection is important for critical jobs as it provides a three-dimensional view of the object.
It allows for accurate measurements and analysis of the object's dimensions and angles.
Other types of projections, such as orthographic projection, may not provide enough detail for critical jobs.
For example, in engineering, iso...
Interview Preparation Tips
- GD AND T
- UG NX
- Prodect development
Skills evaluated in this interview
Graduate Engineer Trainee (Get) Interview Questions & Answers
Danblock Brakes
Anonymous
posted on 23 Sep 2021
I applied via Referral and was interviewed in Aug 2021. There were 4 interview rounds.
Interview Questionnaire
2 Questions
- Q1. HR Interview:- Tell me about yourself? Why is there a gap year?
- Ans.
I am a graduate engineer trainee with a gap year due to personal reasons.
I completed my engineering degree and then took a gap year to focus on personal matters.
During this time, I dealt with some family issues that required my attention and support.
I used the gap year to gain practical experience through internships and part-time jobs.
I also took the opportunity to enhance my skills by attending workshops and online c...
- Q2. Technical Interview:- two round In first round ask about Least Count definition and every scale least count? Boiler and its type? Four stroke and two stroke engine? Lathe match :- four jaw Chuck and thr...
Interview Preparation Tips
Confidence is the main key.
I applied via Walk-in and was interviewed before Aug 2020. There were 4 interview rounds.
Interview Questionnaire
4 Questions
- Q1. Tell me about your self?
- Q2. I tell my name my education my hobbies interests & my family
- Q3. Least count of micro meter
- Ans.
The least count of a micrometer is the smallest measurement that can be read on the micrometer scale.
The least count of a micrometer is determined by the number of divisions on the thimble and the pitch of the screw.
It is usually expressed in micrometers or millimeters.
For example, if a micrometer has 50 divisions on the thimble and the pitch of the screw is 0.5 mm, then the least count would be 0.01 mm (0.5 mm / 50 di
- Q4. Least count of vernier calliper
- Ans.
The least count of a vernier caliper is the smallest measurement that can be read on the scale.
The least count is determined by the number of divisions on the main scale and the vernier scale.
It is calculated by dividing the smallest division on the main scale by the total number of divisions on the vernier scale.
For example, if the smallest division on the main scale is 0.1 mm and the total number of divisions on the ...
Interview Preparation Tips
dont be nervous
Graduate Engineer Trainee (Get) Interview Questions & Answers
Accurate Engineering Company
Anonymous
posted on 20 Feb 2020
I applied via Walk-in and was interviewed in Aug 2019. There were 4 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Based on mechanical related questions
- Q2. What is tollerance, roughness,roundness,quality armature,starter and 5s more than questions are asked.
- Ans.
Explanation of tolerance, roughness, roundness, quality armature, starter, and 5S.
Tolerance is the allowable variation in a dimension or property of a part or product.
Roughness refers to the texture of a surface, typically measured in micrometers.
Roundness is the degree to which a part or product is circular or cylindrical.
Quality armature refers to the components of an electric motor that convert electrical energy int...
Interview Preparation Tips
Engineer Trainee Interview Questions & Answers
Nelson Global Products
arvind lanke
posted on 20 Aug 2021
I applied via Walk-in and was interviewed before Aug 2020. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Introduce yourself
Coperion Ideal Interview FAQs
Some of the top questions asked at the Coperion Ideal Engineer Trainee interview -
Tell us how to improve this page.
Coperion Ideal Interviews By Designations
Interview Questions for Popular Designations
- Graduate Engineer Trainee (Get) Interview Questions
- Diploma Trainee Engineer Interview Questions
- Apprentice Trainee Interview Questions
- Apprenticeship Trainee Interview Questions
- Trainee Interview Questions
- Graduate Apprentice Trainee Interview Questions
- Graduate Apprenticeship Trainee Interview Questions
- Management Trainee Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
|
Assistant Manager
7
salaries
|  ₹11.2 L/yr - ₹18 L/yr |
|
Engineer
7
salaries
| ₹5.8 L/yr - ₹9.5 L/yr |
|
Deputy Manager
6
salaries
| ₹10.6 L/yr - ₹16.5 L/yr |
|
Mechanical Engineer
6
salaries
| ₹5.2 L/yr - ₹9.8 L/yr |
|
Senior Engineer
5
salaries
| ₹7.5 L/yr - ₹13.8 L/yr |
Buhler
TKIL
GEA Group
Andritz Hydro Location India
Calculate your in-hand salary
- Home >
- Interviews >
- Coperion Ideal Interview Questions >
- Coperion Ideal Engineer Trainee Interview Questions
