10+ 2B Found Interview Questions and Answers

The thickness of compreg ply varies depending on its intended use and application. Its size can also vary depending on the manufacturer and customer requirements.

• The thickness of compreg ply can range from 3mm to 25mm or more

• The size of compreg ply can vary from 4ft x 8ft to 5ft x 10ft or more

• The thickness and size of compreg ply can be customized based on the specific requirements of the project

• Compreg ply is commonly used in construction, furniture making, and other applica...read more

The consumption of shuttering oil per liter depends on the area covered.

• The consumption of shuttering oil per liter can vary depending on factors such as the type of shuttering material, surface texture, and weather conditions.

• On average, 1 liter of shuttering oil can cover approximately 10-15 square meters of surface area.

• However, this can vary significantly based on the absorbency of the surface and the thickness of the oil application.

• For example, if the surface is highly ...read more

Rolling margin of steel is the difference between the target thickness and the actual thickness after rolling.

• Rolling margin is a measure of the accuracy of the rolling process.

• It is calculated by subtracting the actual thickness of the steel after rolling from the target thickness.

• A positive rolling margin means the steel is thicker than intended, while a negative rolling margin means it is thinner.

• Rolling margin is important for ensuring the quality and consistency of steel...read more

The elongation % of fe550 steel varies depending on the specific grade and manufacturing process.

• The elongation % of fe550 steel can range from 14% to 20%.

• It is important to refer to the specifications provided by the manufacturer for accurate information.

• The elongation % indicates the ability of the steel to deform before breaking under tension.

• Fe550 steel is commonly used in construction and reinforcement applications.

The maximum repetition of ply shuttering depends on various factors such as quality of ply, weather conditions, and type of concrete.

• The maximum repetition of ply shuttering can range from 5 to 20 times depending on the above factors.

• If the quality of ply is good and weather conditions are favorable, the ply shuttering can be reused more number of times.

• However, if the concrete mix is harsh or the weather conditions are extreme, the ply shuttering may need to be replaced afte...read more

I have more knowledge in structural engineering.

• Specialization in structural analysis and design

• Extensive experience in designing buildings, bridges, and other structures

• Knowledge of various materials and construction techniques

• Familiarity with relevant codes and standards

• Ability to perform structural calculations and simulations

The density of cement is around 1440 kg/m³.

• The density of cement varies depending on the type of cement.

• The density of Portland cement is around 1440 kg/m³.

• The density of lightweight cement is around 1000 kg/m³.

• The density of high-density cement is around 3000 kg/m³.

Bending moment formula calculates the internal bending moment in a beam or structure.

• Bending moment formula is M = F * d

• M is the bending moment, F is the force applied, and d is the distance from the force to the point of interest

• Bending moment can be positive or negative depending on the direction of the force and the orientation of the beam

• Bending moment is an important factor in designing and analyzing structures

Clear cover in column refers to the distance between the surface of the reinforcement and the outer surface of the concrete.

• Clear cover is important to protect the reinforcement from corrosion and to ensure proper bonding between the reinforcement and concrete.

• The required clear cover for columns depends on factors such as the type of structure, exposure conditions, and size of the reinforcement.

• For example, in a coastal area with high humidity and salt content in the air, a ...read more

The method lap length of rebar is calculated using a formula based on the diameter of the rebar and the strength of the concrete.

• The formula for calculating the method lap length is: Ld = (phi * fy * As) / (4 * sigma_b)

• Ld is the lap length, phi is the reduction factor, fy is the yield strength of the rebar, As is the cross-sectional area of the rebar, and sigma_b is the bond stress between the rebar and the concrete.

• The method lap length is used to ensure that the rebar is pr...read more

Concrete is a strong and durable construction material made from a mixture of cement, sand, gravel, and water.

• Concrete is commonly used in building foundations, roads, bridges, and other structures.

• It is formed by combining cement, sand, gravel, and water in specific proportions.

• Once mixed, the concrete hardens and becomes a solid material that can withstand heavy loads and resist weathering.

• Reinforcing steel bars, known as rebar, are often used in concrete construction to pr...read more

Types of design include graphic design, product design, interior design, fashion design, and web design.

• Graphic design involves creating visual content for print or digital media

• Product design involves designing physical products for manufacturing

• Interior design involves designing spaces for functionality and aesthetics

• Fashion design involves creating clothing and accessories

• Web design involves designing websites for user experience and functionality

The unit weight of steel refers to the weight of a specific volume of steel material.

• Unit weight of steel is typically measured in kilograms per cubic meter (kg/m³).

• The unit weight of steel can vary depending on the type and grade of steel.

• For example, the unit weight of mild steel is approximately 7850 kg/m³.

• Higher strength steels like stainless steel can have a higher unit weight.

• The unit weight of steel is an important factor in structural engineering calculations.

BBS stands for Bulletin Board System, which is a computer-based system that allows users to communicate and share information.

• BBS is an online platform where users can post messages and interact with each other.

• It was popular in the 1980s and 1990s before the widespread use of the internet.

• BBSs often had different forums or categories for discussions on various topics.

• Users could dial into the BBS using a modem and access its features.

• Some BBSs also offered file sharing, game...read more

The question is not clear or may contain a typo.

• Ask for clarification on the question.

• Request the interviewer to repeat or rephrase the question.

• If the question is related to cement, provide information on its composition, uses, and manufacturing process.

• If the question is related to a different topic, ask for more details to provide an appropriate answer.

The size of a brick can vary depending on the type and country of origin.

• The standard size of a brick in the UK is 215mm x 102.5mm x 65mm.

• In the US, the standard size is 203mm x 92mm x 57mm.

• Bricks can also come in different shapes and sizes for specific purposes.

• The size of a brick can affect the amount of mortar needed for construction.

I have a typing speed of 70 words per minute with 98% accuracy.

• My typing speed is 70 words per minute.

• I have a typing accuracy of 98%.

• I am proficient in touch typing and can type without looking at the keyboard.

• I have experience in typing various types of documents such as reports, emails, and memos.

• I am constantly working on improving my typing speed and accuracy.