Cedarview Technology Lead Electrical Engineer Interview Questions and Answers

Q1. When is my interview time?
Add your answer
Q2. What documents should I prepare to bring with me?
Add your answer
Q3. What would be good for the company?
Add your answer
Q4. Will the company be with me forever?
Add your answer
Q5. Will the company be with me in my ups and downs?
Add your answer

Q1. Asking for bms system
Add your answer
Q2. Previous year experience
Ans. 
I have 3 years of experience working as an Electrical Engineer in a power distribution company.
• Designed electrical systems for new construction projects

• Performed regular maintenance on electrical equipment

• Troubleshooted and repaired electrical issues in a timely manner
Answered by AI
Add your answer

Q1. Current (I) =voltage (V)/Resistance (R)
Ans. 
Ohm's Law states that current is equal to voltage divided by resistance.
• Ohm's Law is a fundamental principle in electrical engineering

• Current (I) is measured in Amperes (A)

• Voltage (V) is measured in Volts (V)

• Resistance (R) is measured in Ohms (Ω)

• The formula I = V/R can be used to calculate current in a circuit
Answered by AI
Add your answer
Q2. What it ohm's law
Ans. 
Ohm's law states that the current flowing through a conductor between two points is directly proportional to the voltage across the two points.
• Ohm's law is represented by the equation V = IR, where V is voltage, I is current, and R is resistance.

• It is named after German physicist Georg Simon Ohm.

• Ohm's law is fundamental in the field of electrical engineering and is used to analyze and design electrical circuits.

• It help...read more
Answered by AI
Add your answer
Q3. SI unit of flux
Ans. 
Weber (Wb)
• The SI unit of flux is Weber (Wb)

• Flux is a measure of the flow of a physical quantity through a surface

• It is commonly used in electromagnetism and is defined as the amount of magnetic field passing through a surface
Answered by AI
Add your answer
Q4. Difference between AC and DC
Ans. 
AC stands for alternating current, which changes direction periodically, while DC stands for direct current, which flows in one direction.
• AC changes direction periodically, while DC flows in one direction constantly.

• AC is used in household appliances and power distribution, while DC is used in batteries and electronic devices.

• AC can be easily converted to different voltage levels using transformers, while DC requires m...read more
Answered by AI
Add your answer
Q5. How will you calculate current carrying in a conductor ?
Ans. 
Current carrying in a conductor can be calculated using Ohm's Law, which states that current (I) equals voltage (V) divided by resistance (R).
• Use Ohm's Law: I = V / R

• Determine the voltage across the conductor

• Find the resistance of the conductor

• Calculate the current flowing through the conductor using the formula
Answered by AI
Add your answer

Q1. If there Hazzard is occur so what should we do first
Ans. 
The first thing to do in case of a hazard is to ensure the safety of yourself and others.
• Assess the situation to determine the nature and extent of the hazard.

• Alert others in the vicinity about the hazard.

• Follow safety protocols and procedures to mitigate the hazard.

• Contact emergency services if necessary.

• Evacuate the area if instructed to do so.
Answered by AI
Add your answer
Q2. What should you do when their is no EV
Add your answer
Q3. Also the DG suddenly stopped
Add your answer

Q1. What should u do when dg fuel dosnot passess through a enjector
Ans. 
Check for clogs in the fuel line, inspect the injector for damage, clean or replace the injector if necessary.
• Inspect the fuel line for any clogs or blockages

• Check the injector for any damage or malfunction

• Clean the injector using appropriate tools and techniques

• If cleaning doesn't work, consider replacing the injector

• Ensure proper fuel flow and pressure to the injector
Answered by AI
Add your answer
Q2. How van we know earth leacage
Ans. 
Earth leakage can be detected using a residual current device (RCD) or ground fault circuit interrupter (GFCI).
• Earth leakage can be detected by measuring the difference in current between the live and neutral wires in a circuit.

• A residual current device (RCD) or ground fault circuit interrupter (GFCI) can be used to detect earth leakage and quickly disconnect the power supply to prevent electric shock.

• Regular testing o...read more
Answered by AI
Add your answer

Q1. What is transformer?
Ans. 
A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.
• Consists of two coils of wire, known as primary and secondary coils

• Primary coil receives electrical energy and creates a magnetic field

• Magnetic field induces a voltage in the secondary coil, transferring energy

• Used to step up or step down voltage in power distribution systems

• Examples include power t...read more
Answered by AI
Add your answer
Q2. Types of transformer?
Ans. 
Types of transformers include step-up, step-down, isolation, autotransformer, and instrument transformer.
• Step-up transformer increases voltage

• Step-down transformer decreases voltage

• Isolation transformer provides electrical isolation between primary and secondary windings

• Autotransformer has a single winding with multiple taps

• Instrument transformer is used for measuring current or voltage in high voltage circuits
Answered by AI
Add your answer
Q3. What is current transformer?
Ans. 
A current transformer is a type of instrument transformer that is used to measure alternating current.
• Current transformers step down current to a safe level for measurement or protection purposes.

• They have a primary winding connected in series with the circuit carrying the current to be measured.

• The secondary winding is connected to measuring or protective devices.

• Current transformers are commonly used in power systems...read more
Answered by AI
Add your answer
Q4. What is difference between current transformer and potential transformer?
Ans. 
Current transformer is used to measure current while potential transformer is used to measure voltage.
• Current transformer is connected in series with the circuit being measured, while potential transformer is connected in parallel.

• Current transformer steps down the current to a measurable level, while potential transformer steps down the voltage.

• Current transformer is used for protection and metering purposes, while po...read more
Answered by AI
Add your answer
Q5. What is current
Ans. 
Current is the flow of electric charge in a circuit.
• Current is measured in Amperes (A).

• It is the rate of flow of electric charge past a point in a circuit.

• Current can be either direct current (DC) or alternating current (AC).

• In a series circuit, the current is the same at all points.

• In a parallel circuit, the total current is divided among the branches.

• Ohm's Law relates current, voltage, and resistance: I = V/R.
Answered by AI
Add your answer
Q6. What is voltage
Ans. 
Voltage is the difference in electric potential between two points in a circuit, measured in volts.
• Voltage is the driving force that pushes electric current through a circuit

• It is measured in volts (V)

• Higher voltage means more potential energy available to move electrons

• Voltage can be DC (direct current) or AC (alternating current)

• Example: A battery provides a voltage of 1.5V to power a flashlight
Answered by AI
Add your answer

Q1. Why are power transformer trip
Add your answer
Q2. Test off transformer
Add your answer

Q1. No interview question
Add your answer

Worst worst worst Test is Nothings

Q1. Worst worst worst worst
Ans. 
The interviewer may have made a mistake or technical issue with the question.
• It seems like the interviewer may have accidentally repeated the word 'worst' multiple times.

• You can politely ask for clarification or confirmation on the question to ensure you understand it correctly.

• Remain calm and composed while addressing the issue to show your professionalism.

• Provide a thoughtful response based on your interpretation of
Answered by AI
Add your answer
Q2. Worst worst worst
Ans. 
The worst experience I had was when I accidentally caused a power outage in a large building during a critical event.
• Accidentally causing a power outage in a large building

• During a critical event

• Dealing with the aftermath and fixing the issue quickly and efficiently
Answered by AI
Add your answer
Q3. Worst worst worst waste waste
Ans. 
The question seems to be asking about the candidate's experience with handling waste in an electrical technician role.
• Discussing proper disposal methods for electronic waste

• Explaining the importance of recycling materials in the field

• Sharing experiences with hazardous waste management in electrical work
Answered by AI
Add your answer
Q4. Water water water
Add your answer

Q1. I am Ajay Kumar ghadai, I am form bhatrak, I have complete my ITI industrial technique institute Bhadrak.2011 ,
Add your answer
Q2. I am continue in Infosys limited company electrical supervisor post in 5 years experience joining date 2018 to continue Sobha development limited 5 years experience joining date 2013 to 2018
Add your answer