Cadila Pharmaceuticals Executive Production Interview Questions and Answers for Experienced

Distillation is a process of separating components of a liquid mixture based on their different boiling points.

• Distillation involves heating a liquid mixture to vaporize the more volatile components.

• The vapor is then cooled and condensed back into a liquid, resulting in the separation of the components.

• The component with the lower boiling point will vaporize first and can be collected separately.

• Common examples of dist...read more

There are various types of distillation, such as fractional distillation, simple distillation, and vacuum distillation.

• Fractional distillation is used to separate mixtures with close boiling points, such as in the separation of different components of crude oil.

• Simple distillation is used to separate liquids with significantly different boiling points, such as in the purification of water.

• Vacuum distillation is used to...read more

The type of pump and valve depends on the specific production process and requirements.

• The selection of pump and valve depends on factors such as the fluid being handled, flow rate, pressure, temperature, and material compatibility.

• Common types of pumps include centrifugal pumps, positive displacement pumps, and diaphragm pumps.

• Common types of valves include ball valves, gate valves, globe valves, and butterfly valves.

• ...read more

Data integrity refers to the accuracy, consistency, and reliability of data throughout its lifecycle.

• Data integrity ensures that data remains unchanged and reliable.

• It involves maintaining the accuracy and consistency of data over time.

• Data integrity can be achieved through various methods such as validation, encryption, and backup.

• Examples of data integrity issues include data corruption, unauthorized modifications, a...read more

We have 10 compression machines in our company.

• We have a total of 10 compression machines.

• These machines are used for compressing various materials.

• They are an essential part of our production process.

• The machines are regularly maintained to ensure optimal performance.

• Examples of materials that are compressed include plastics, metals, and powders.

The number of load cells required depends on the production process and equipment being used.

• The number of load cells needed varies depending on the type of equipment and production process.

• Load cells are used to measure weight or force in a production process.

• For example, a packaging line may require multiple load cells to ensure accurate filling of products.

• The number of load cells needed should be determined by a pr...read more

Load cells are available in various parts of the machine.

• Load cells are commonly found in the weighing system of the machine.

• They can also be found in the material handling system to measure the weight of the material being moved.

• Load cells may be present in the machine's hydraulic or pneumatic systems to measure force or pressure.

• They can also be used in the machine's safety systems to detect overloading or excessive ...read more

Load cell calibration procedure involves testing and adjusting the load cell to ensure accurate measurement.

• Verify the load cell specifications and calibration requirements

• Apply known loads to the load cell and record readings

• Compare the readings with the expected values and adjust if necessary

• Repeat the process until the load cell readings are within the acceptable range

• Document the calibration process and results

SCADA stands for Supervisory Control and Data Acquisition. It is a system used for monitoring and controlling industrial processes.

• SCADA systems are used in various industries such as oil and gas, water treatment, and manufacturing.

• They consist of hardware and software components that work together to collect and analyze data from sensors and other devices.

• SCADA systems allow operators to remotely monitor and control p...read more

Gun validation procedure is a process to ensure that a firearm is safe and functional.

• The gun is visually inspected for any damage or defects.

• The gun is disassembled and inspected for any wear or damage to internal parts.

• The gun is test fired to ensure that it functions properly.

• The gun's serial number is checked against a database to ensure that it is not stolen.

• The gun is marked with a unique identifier to indicate t...read more

End point in granulation refers to the point where the desired granule size is achieved.

• End point is determined by monitoring the granule size distribution.

• In RMG, the end point is usually achieved when the desired particle size is obtained and the moisture content is within the specified range.

• In FBD, the end point is reached when the desired particle size is achieved and the moisture content is within the specified r...read more

There are several types of validation used in production processes.

• Data validation ensures that input data meets certain criteria or rules.

• Process validation ensures that a production process consistently produces the desired output.

• Equipment validation ensures that production equipment is functioning correctly and reliably.

• Cleaning validation ensures that cleaning procedures effectively remove residues or contaminants...read more

Change control is a process of managing changes to a product or system.

• It involves documenting and tracking changes

• It ensures that changes are made in a controlled and systematic manner

• It helps to minimize the risk of errors and defects

• Examples include software updates, product design changes, and process improvements

There are various types of deviations in production processes.

• There are three types of deviations: minor, major, and critical.

• Minor deviations are those that do not affect the quality of the product.

• Major deviations are those that affect the quality of the product but do not pose a risk to the patient.

• Critical deviations are those that pose a risk to the patient and require immediate action.

• Examples of deviations inclu...read more

There are two types of charge control: constant current and constant voltage.

• Constant current charge control maintains a steady flow of current to the battery until it reaches a certain voltage level.

• Constant voltage charge control maintains a steady voltage level to the battery until the current drops to a certain level.

• Examples of charge control devices include battery chargers, solar charge controllers, and power ba

I'm sorry, but I need more context to understand the question.

• What is RMG?

• What is the context of the question?

• What type of capacity is being referred to?