Filter interviews by
Scaffolding types include various structures for supporting work at heights, ensuring safety and efficiency in construction.
1. Supported Scaffolding: Built from the ground up, commonly used in construction.
2. Suspended Scaffolding: Hangs from a roof or building, ideal for high-rise work.
3. Rolling Scaffolding: Mobile scaffolds on wheels, allowing easy movement around a site.
4. Cantilever Scaffolding: Supported on ...
PASS is a fire extinguisher acronym for Pull, Aim, Squeeze, and Sweep, guiding effective fire suppression.
Pull the pin: This unlocks the extinguisher and allows you to use it.
Aim low: Point the nozzle at the base of the fire for effective suppression.
Squeeze the handle: This releases the extinguishing agent.
Sweep side to side: Move the nozzle from side to side until the fire is out.
Color codes are standardized colors used to convey specific safety information in various industries.
Red: Indicates danger or emergency, such as fire alarms or stop signs.
Yellow: Caution, often used for warning signs or to indicate potential hazards.
Green: Safe conditions, such as first aid kits or emergency exits.
Blue: Mandatory actions, like wearing personal protective equipment (PPE).
Orange: Indicates a warning...
Fire is a rapid chemical reaction that produces heat, light, and combustion, typically involving oxygen and a fuel source.
Fire requires three elements: heat, fuel, and oxygen (the fire triangle).
Examples of fuels include wood, gasoline, and natural gas.
Fire can be classified into different types: flames, smoldering, and explosive.
It can cause destruction but is also used beneficially in cooking and energy producti...
Switch gear is a combination of electrical disconnect switches, fuses or circuit breakers used to control, protect and isolate electrical equipment. Circuit breakers are specifically designed to protect electrical circuits from damage caused by overload or short circuit.
Switch gear is a combination of switches, fuses, or circuit breakers used to control electrical equipment.
Circuit breakers are designed to protect...
ACB stands for Air Circuit Breaker and VCB stands for Vacuum Circuit Breaker. Both are types of circuit breakers used in electrical systems.
ACB uses air as the arc quenching medium, while VCB uses vacuum.
ACB is suitable for low voltage applications, while VCB is suitable for medium to high voltage applications.
VCB has higher breaking capacity compared to ACB.
ACB requires more maintenance compared to VCB due to the...
Electricity is the flow of electric charge through a conductor.
Electricity is a form of energy that powers electrical devices.
It is generated by the movement of electrons through a conductor.
Electricity can be produced by various means such as batteries, generators, and solar panels.
It can be dangerous if not handled properly, leading to electric shocks or fires.
Earthing is the process of connecting electrical systems to the ground to prevent electric shocks and ensure safety.
Earthing provides a path for fault currents to flow safely into the ground.
It helps protect electrical equipment and appliances from damage due to lightning strikes or power surges.
Proper earthing is essential for ensuring the safety of individuals working with electrical systems.
Examples of earthing...
Safety internet audit is a process of evaluating the safety measures and risks associated with internet usage in an organization.
It involves assessing the security of the network and systems used for internet access.
It also includes reviewing the policies and procedures related to internet usage.
The audit helps identify potential risks and vulnerabilities and recommends measures to mitigate them.
Examples of risks ...
Housekeeping refers to the maintenance and cleanliness of a workplace or living space.
It involves regular cleaning and organizing of the area.
It helps prevent accidents and promotes a safe environment.
It also improves productivity and morale.
Examples include sweeping, mopping, dusting, and disposing of waste properly.
I appeared for an interview before Feb 2024.
Switch gear is a combination of electrical disconnect switches, fuses or circuit breakers used to control, protect and isolate electrical equipment. Circuit breakers are specifically designed to protect electrical circuits from damage caused by overload or short circuit.
Switch gear is a combination of switches, fuses, or circuit breakers used to control electrical equipment.
Circuit breakers are designed to protect elec...
Power factor of transformer and lightning arrestor are important factors in electrical engineering.
Power factor of a transformer is the ratio of real power to apparent power. It indicates how efficiently the transformer is converting electrical power.
A high power factor indicates efficient power usage, while a low power factor indicates inefficient power usage.
Lightning arrestors are devices used to protect electrical ...
ACB stands for Air Circuit Breaker and VCB stands for Vacuum Circuit Breaker. Both are types of circuit breakers used in electrical systems.
ACB uses air as the arc quenching medium, while VCB uses vacuum.
ACB is suitable for low voltage applications, while VCB is suitable for medium to high voltage applications.
VCB has higher breaking capacity compared to ACB.
ACB requires more maintenance compared to VCB due to the pres...
VFD stands for Variable Frequency Drive, a type of motor controller that varies the frequency and voltage supplied to an electric motor.
VFDs are used to control the speed and torque of AC motors by varying the frequency of the electrical input.
They are commonly used in industrial applications to save energy, improve process control, and reduce wear and tear on equipment.
VFDs can be programmed to ramp up or down the mot...
I appeared for an interview in Nov 2024, where I was asked the following questions.
Scaffolding types include various structures for supporting work at heights, ensuring safety and efficiency in construction.
1. Supported Scaffolding: Built from the ground up, commonly used in construction.
2. Suspended Scaffolding: Hangs from a roof or building, ideal for high-rise work.
3. Rolling Scaffolding: Mobile scaffolds on wheels, allowing easy movement around a site.
4. Cantilever Scaffolding: Supported on one s...
Fire is a rapid chemical reaction that produces heat, light, and combustion, typically involving oxygen and a fuel source.
Fire requires three elements: heat, fuel, and oxygen (the fire triangle).
Examples of fuels include wood, gasoline, and natural gas.
Fire can be classified into different types: flames, smoldering, and explosive.
It can cause destruction but is also used beneficially in cooking and energy production.
Fi...
PASS is a fire extinguisher acronym for Pull, Aim, Squeeze, and Sweep, guiding effective fire suppression.
Pull the pin: This unlocks the extinguisher and allows you to use it.
Aim low: Point the nozzle at the base of the fire for effective suppression.
Squeeze the handle: This releases the extinguishing agent.
Sweep side to side: Move the nozzle from side to side until the fire is out.
Color codes are standardized colors used to convey specific safety information in various industries.
Red: Indicates danger or emergency, such as fire alarms or stop signs.
Yellow: Caution, often used for warning signs or to indicate potential hazards.
Green: Safe conditions, such as first aid kits or emergency exits.
Blue: Mandatory actions, like wearing personal protective equipment (PPE).
Orange: Indicates a warning, oft...
I belong to the state of California.
I am a native of California.
I have lived in California for most of my life.
I completed my education in California, including my engineering degree.
I have worked on various construction projects in California.
I am familiar with the building codes and regulations specific to California.
Earthing is the process of connecting electrical systems to the ground to prevent electric shocks and ensure safety.
Earthing provides a path for fault currents to flow safely into the ground.
It helps protect electrical equipment and appliances from damage due to lightning strikes or power surges.
Proper earthing is essential for ensuring the safety of individuals working with electrical systems.
Examples of earthing syst...
Electricity is the flow of electric charge through a conductor.
Electricity is a form of energy that powers electrical devices.
It is generated by the movement of electrons through a conductor.
Electricity can be produced by various means such as batteries, generators, and solar panels.
It can be dangerous if not handled properly, leading to electric shocks or fires.
I applied via Company Website and was interviewed before Oct 2022. There were 3 interview rounds.
Works activity plane, manpower, drawing ditels, proper tool, power tools & good working area
I appeared for an interview before May 2024, where I was asked the following questions.
I appeared for an interview before May 2024, where I was asked the following questions.
Safety is the state of being protected from harm, danger, or injury.
Safety involves identifying and assessing potential hazards
It requires implementing measures to prevent accidents or injuries
It involves educating and training individuals on safe practices
Examples include wearing personal protective equipment, following safety protocols, and maintaining equipment
Safety is a shared responsibility and requires cooperati...
Job safety analysis is a process of identifying potential hazards and developing measures to prevent accidents.
It involves breaking down a job into individual tasks and analyzing each task for potential hazards.
The analysis includes identifying the likelihood and severity of each hazard.
Measures are then developed to eliminate or control the hazards.
Job safety analysis is often used in high-risk industries such as cons...
Housekeeping refers to the maintenance and cleanliness of a workplace or living space.
It involves regular cleaning and organizing of the area.
It helps prevent accidents and promotes a safe environment.
It also improves productivity and morale.
Examples include sweeping, mopping, dusting, and disposing of waste properly.
Safety internet audit is a process of evaluating the safety measures and risks associated with internet usage in an organization.
It involves assessing the security of the network and systems used for internet access.
It also includes reviewing the policies and procedures related to internet usage.
The audit helps identify potential risks and vulnerabilities and recommends measures to mitigate them.
Examples of risks inclu...
Top trending discussions
The duration of Bygging India interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 18 interview experiences
Difficulty level
Duration
based on 161 reviews
Rating in categories
Civil Engineer
41
salaries
| ₹2.2 L/yr - ₹6.5 L/yr |
Senior Engineer
22
salaries
| ₹4.3 L/yr - ₹7.2 L/yr |
Mechanical Engineer
18
salaries
| ₹3 L/yr - ₹6.2 L/yr |
Safety Officer
16
salaries
| ₹2.8 L/yr - ₹4.8 L/yr |
Civil Site Engineer
14
salaries
| ₹2.2 L/yr - ₹4 L/yr |
Ramky Infrastructure
McNally Bharat Engineering
SYSTRA
Techno Electric & Engineering Company