Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Bonace Engineers Team. If you also belong to the team, you can get access from here

Bonace Engineers Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Bonace Engineers Senior Engineer Mechanical Interview Questions and Answers

Updated 28 Nov 2024

Bonace Engineers Senior Engineer Mechanical Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company

Round 1 - Technical 

(1 Question)

  • Q1. What is the process of RT
  • Ans. 

    RT stands for Radiographic Testing, a non-destructive testing method used to detect internal defects in materials.

    • RT involves exposing a test object to X-rays or gamma rays and capturing the resulting image on a film or digital detector.

    • The image produced can reveal internal defects such as cracks, voids, inclusions, or porosity.

    • Interpretation of the radiographic image requires trained personnel to identify and evaluat...

  • Answered by AI

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Technical(if you are an outsider)
Round 3 - One-on-one 

(1 Question)

  • Q1. Salary negotiation and approval

Interview Preparation Tips

Interview preparation tips for other job seekers - Better Know your manager, some will accept money to get you in.
Even they will train you for the interview.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Sep 2023. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. New innovations, modification & research related

Interview Preparation Tips

Interview preparation tips for other job seekers - Full proof document and aptitude over the subject
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jul 2023. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Ask about general information.
Round 2 - Technical 

(1 Question)

  • Q1. Technical questions related to experience.
Round 3 - Medical test & other formalities 

(1 Question)

  • Q1. After interview there are serval process like medical test, salary fitment & various internal approval.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be what you are.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Welding rod specifications
  • Ans. 

    Welding rod specifications include material composition, diameter, and AWS classification.

    • Welding rod specifications typically include material composition, such as carbon steel or stainless steel.

    • Diameter of the welding rod is an important specification to ensure proper weld penetration.

    • AWS classification indicates the type of welding process and the strength of the weld.

    • Examples of welding rod specifications: E6010,

  • Answered by AI
  • Q2. Types of welding process
  • Ans. 

    Various types of welding processes include MIG, TIG, stick, flux-cored, and spot welding.

    • MIG (Metal Inert Gas) welding uses a wire electrode and shielding gas to join metals.

    • TIG (Tungsten Inert Gas) welding uses a non-consumable tungsten electrode and inert gas for welding.

    • Stick welding, also known as Shielded Metal Arc Welding (SMAW), uses a flux-coated electrode.

    • Flux-cored welding uses a tubular wire filled with flux...

  • Answered by AI

I applied via Company Website and was interviewed before Aug 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Hydraulic symbols and drawings
  • Q2. Hydraulic circuit of any equipment
  • Ans. 

    Hydraulic circuit is a system of interconnected pipes, valves, and actuators that transmit power using pressurized fluid.

    • Hydraulic circuits are commonly used in heavy machinery, such as excavators and cranes.

    • The circuit consists of a pump, valves, cylinders, and hoses.

    • The pump pressurizes the fluid, which is then directed to the valves.

    • The valves control the flow of fluid to the cylinders, which then convert the fluid ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just stick to basics, they will only ask about basics, In L&T safety plays a important role.

Always mention safety taken while doing any work

I applied via Walk-in and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Question on excavators
  • Q2. Questions on boomplacer
  • Q3. About reports to be maintained at site leval
Round 3 - HR 

(2 Questions)

  • Q1. Regarding educational documents
  • Q2. Previous experience details

Interview Preparation Tips

Interview preparation tips for other job seekers - Polite attitude and positive way of answering the questions, if the anwser is right or not doesn't matter(not all the times). Be careful about safety related issues.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. About your self, Why you want to change.
Round 2 - Technical 

(1 Question)

  • Q1. Welding, Steel Structure, Civil structure

Interview Preparation Tips

Interview preparation tips for other job seekers - take it easy

I applied via LinkedIn and was interviewed in Apr 2021. There were 2 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About career achievements
  • Q2. Tell us about you approach towards a complex work

Interview Preparation Tips

Topics to prepare for Larsen & Toubro Limited Senior Engineer Mechanical interview:
  • Communication Skills
  • Management
Interview preparation tips for other job seekers - Every company will use you amd throw whenever whatever required.
So work for money not for company
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Aptitude Test 

Exam

Round 3 - HR 

(1 Question)

  • Q1. Discussion on personal and industrial profile
Round 4 - Assignment 

Task

Round 5 - Technical 

(1 Question)

  • Q1. Core technical related to work done in previous
Round 6 - HR 

(1 Question)

  • Q1. Final based on the CTC and benefits

Interview Preparation Tips

Interview preparation tips for other job seekers - Good, it was awesome experience and supporting HR to employee.

Bonace Engineers Interview FAQs

How many rounds are there in Bonace Engineers Senior Engineer Mechanical interview?
Bonace Engineers interview process usually has 1 rounds. The most common rounds in the Bonace Engineers interview process are Technical.

Tell us how to improve this page.

Bonace Engineers Senior Engineer Mechanical Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.4k Interviews
Infosys Interview Questions
3.6
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.6k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.8k Interviews
HCLTech Interview Questions
3.5
 • 3.8k Interviews
Bajaj Auto Interview Questions
3.9
 • 267 Interviews
Thermax Limited Interview Questions
4.1
 • 251 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
View all
Bonace Engineers Senior Engineer Mechanical Salary
based on 6 salaries
₹7.5 L/yr - ₹8 L/yr
7% less than the average Senior Engineer Mechanical Salary in India
View more details

Bonace Engineers Senior Engineer Mechanical Reviews and Ratings

based on 5 reviews

3.7/5

Rating in categories

3.0

Skill development

4.0

Work-life balance

3.7

Salary

3.4

Job security

3.7

Company culture

3.7

Promotions

3.5

Work satisfaction

Explore 5 Reviews and Ratings
Inspection Engineer
92 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Engineer
76 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Executive
40 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Engineer
33 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Safety Officer
27 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bonace Engineers with

Larsen & Toubro Limited

4.0
Compare

Thermax Limited

4.1
Compare

BHEL

4.1
Compare

TCS

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview