Upload Button Icon Add office photos

Birla Corporation

Compare button icon Compare button icon Compare

Filter interviews by

Birla Corporation Mechanical Maintenance Engineer Interview Questions, Process, and Tips

Updated 7 Sep 2024

Birla Corporation Mechanical Maintenance Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. How does the Differential work.
  • Ans. 

    The differential is a device that allows the wheels on an axle to rotate at different speeds while still receiving power from the engine.

    • Allows wheels on the same axle to rotate at different speeds

    • Transfers power from the engine to the wheels

    • Helps with cornering by allowing the outer wheel to rotate faster than the inner wheel

    • Consists of gears that distribute power evenly to the wheels

  • Answered by AI
  • Q2. How to work Dumper Cooling system.
  • Ans. 

    The dumper cooling system is responsible for maintaining the optimal temperature of the dumper to prevent overheating.

    • Regularly check the coolant levels and top up if necessary.

    • Inspect the radiator for any leaks or damage.

    • Clean the radiator fins to ensure proper airflow.

    • Monitor the temperature gauge regularly while operating the dumper.

    • If the dumper overheats, stop immediately and allow it to cool down before continuin

  • Answered by AI
  • Q3. How to work, work permit system during maintenance activities.
  • Ans. 

    Work permit system is a formal process to ensure safety during maintenance activities.

    • Obtain necessary permits before starting any maintenance work.

    • Identify potential hazards and implement necessary safety measures.

    • Communicate with all involved parties about the work being done and safety precautions.

    • Regularly review and update work permits as needed.

    • Examples: hot work permit, confined space entry permit, electrical wo

  • Answered by AI
  • Q4. Which grade oil is used in Hydraulic system.
  • Ans. 

    The grade of oil used in a hydraulic system depends on the system's requirements and manufacturer recommendations.

    • The grade of oil used in a hydraulic system is typically specified by the system manufacturer.

    • Common grades of hydraulic oil include ISO VG 32, ISO VG 46, and ISO VG 68.

    • The grade of oil chosen should meet the viscosity and performance requirements of the hydraulic system.

    • Using the wrong grade of oil can lea...

  • Answered by AI

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jan 2025.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the process of manufacturing of cement?
  • Ans. 

    Cement is manufactured through a complex process involving raw materials like limestone, clay, and gypsum.

    • Crushing and grinding of raw materials (limestone, clay, and iron ore)

    • Mixing the crushed materials in a rotary kiln

    • Heating the mixture to a high temperature to form clinker

    • Grinding the clinker with small amounts of gypsum to produce cement

    • Packaging and distribution of the final product

  • Answered by AI
  • Q2. What are the machinaries user in cement plant?
  • Ans. 

    Various machineries are used in a cement plant for different processes.

    • Crushers: Used to crush the raw materials like limestone and clay

    • Kiln: Used for heating the raw materials to form clinker

    • Grinding mills: Used to grind the clinker into fine powder

    • Conveyors: Used for transporting materials within the plant

    • Packaging machines: Used for packaging the final cement product

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. How to maintain SPC
  • Ans. 

    SPC maintenance involves regular monitoring, analysis, and adjustment of processes to ensure quality control.

    • Regularly collect data on key process parameters

    • Analyze data using statistical tools like control charts

    • Identify trends or patterns that indicate process variation

    • Take corrective actions to address out-of-control situations

    • Train employees on SPC principles and techniques

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the engine.
  • Ans. 

    An engine is a machine that converts energy into mechanical force or motion.

    • Engines are commonly used in vehicles, power plants, and industrial machinery.

    • They can be powered by various sources such as gasoline, diesel, natural gas, or electricity.

    • Engines work by burning fuel or using other energy sources to create a controlled explosion, which generates force.

    • They are designed to convert the energy produced into useful...

  • Answered by AI
  • Q2. What is the transmission
  • Ans. 

    Transmission is a mechanical device that transfers power from the engine to the wheels, allowing the vehicle to change speed and direction.

    • Transmission transfers power from the engine to the wheels

    • It allows the vehicle to change speed and direction

    • There are different types of transmissions such as manual, automatic, and CVT

    • Transmissions have gears that control the speed and torque of the vehicle

    • Examples of transmission...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Hard work & carry out..
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Dec 2024.

Round 1 - Technical 

(4 Questions)

  • Q1. Belt conveyor system and
  • Q2. Roller system management and
  • Q3. Cement making process
  • Q4. Packing plant process
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed in Sep 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Pump element and vibration control and daily LLF
  • Q2. Air blower maintenance decouple and couple side both side & cooling Tower gear box servicing and element
  • Q3. Turbine water wash & maintenance work
  • Q4. Gas turbine water and oil separator (centrifuge)work
  • Q5. Booster compressor disassembly & assembly work , top bottom valve maintenance work

Interview Preparation Tips

Interview preparation tips for other job seekers - Best
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Technical questions
  • Q2. Mantinanc questions
  • Q3. Mantinanc questions
  • Q4. Mantinanc engineer
  • Q5. Mechanical engineering

Interview Preparation Tips

Topics to prepare for Shree Cement Maintenance Engineer interview:
  • Mechanical Engineering
Interview preparation tips for other job seekers - I am b-tech mechanical engineer from Jaipur Rajasthan and I have three years experience in mantinanc engineer
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - HR 

(4 Questions)

  • Q1. Basics mechanical question
  • Q2. What is a thermodynamics
  • Ans. 

    Thermodynamics is the branch of physics that deals with the relationships between heat and other forms of energy.

    • Thermodynamics studies the transfer of energy in the form of heat and work.

    • It involves concepts like entropy, temperature, and energy conversion.

    • Examples include the efficiency of engines, refrigeration systems, and phase transitions in materials.

  • Answered by AI
  • Q3. Third law of motion
  • Ans. 

    The third law of motion states that for every action, there is an equal and opposite reaction.

    • States that when one object exerts a force on a second object, the second object exerts an equal and opposite force on the first object

    • The forces always occur in pairs

    • Examples include a rocket pushing against the ground to lift off, or a person pushing against a wall

  • Answered by AI
  • Q4. Types of bearing
  • Ans. 

    Types of bearings include ball bearings, roller bearings, plain bearings, and fluid bearings.

    • Ball bearings: use balls to reduce friction between two surfaces

    • Roller bearings: use cylindrical rollers to reduce friction

    • Plain bearings: have a simple surface with no moving parts

    • Fluid bearings: use a thin layer of liquid or gas to reduce friction

  • Answered by AI
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Tell me about yourself.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Mathematics,Reasing, Technical

Round 3 - One-on-one 

(2 Questions)

  • Q1. Technical Question CNC Machine ,
  • Q2. CNC Machine And Technical

Interview Preparation Tips

Topics to prepare for JSW Cement Mechanical Engineer interview:
  • CNC Machines
  • Maintenance
  • Machine Design

Birla Corporation Interview FAQs

How many rounds are there in Birla Corporation Mechanical Maintenance Engineer interview?
Birla Corporation interview process usually has 1 rounds. The most common rounds in the Birla Corporation interview process are Technical.
What are the top questions asked in Birla Corporation Mechanical Maintenance Engineer interview?

Some of the top questions asked at the Birla Corporation Mechanical Maintenance Engineer interview -

  1. How to work, work permit system during maintenance activiti...read more
  2. Which grade oil is used in Hydraulic syst...read more
  3. How to work Dumper Cooling syst...read more

Tell us how to improve this page.

Birla Corporation Mechanical Maintenance Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

UltraTech Cement Interview Questions
4.2
 • 572 Interviews
JK Cement Interview Questions
4.1
 • 255 Interviews
Grasim Industries Interview Questions
4.0
 • 205 Interviews
ACC Interview Questions
3.9
 • 189 Interviews
Shree Cement Interview Questions
3.8
 • 155 Interviews
Infra.Market Interview Questions
4.2
 • 114 Interviews
Ambuja Cements Interview Questions
3.9
 • 108 Interviews
JSW Cement Interview Questions
4.1
 • 103 Interviews
View all
Birla Corporation Mechanical Maintenance Engineer Salary
based on 13 salaries
₹1 L/yr - ₹8.2 L/yr
14% more than the average Mechanical Maintenance Engineer Salary in India
View more details

Birla Corporation Mechanical Maintenance Engineer Reviews and Ratings

based on 6 reviews

4.5/5

Rating in categories

4.2

Skill development

4.5

Work-life balance

4.5

Salary

4.2

Job security

4.5

Company culture

4.1

Promotions

4.5

Work satisfaction

Explore 6 Reviews and Ratings
Assistant Manager
233 salaries
unlock blur

₹6 L/yr - ₹16.3 L/yr

Senior Executive
115 salaries
unlock blur

₹4.5 L/yr - ₹12.6 L/yr

Manager
87 salaries
unlock blur

₹9.6 L/yr - ₹24.4 L/yr

Deputy Manager
84 salaries
unlock blur

₹8.5 L/yr - ₹17.7 L/yr

Senior Engineer
69 salaries
unlock blur

₹4 L/yr - ₹10.3 L/yr

Explore more salaries
Compare Birla Corporation with

UltraTech Cement

4.2
Compare

Ambuja Cements

3.9
Compare

ACC

3.9
Compare

Grasim Industries

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview