AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Bhushan Steel & Strips Operation & Maintenance Engineer Interview Questions and Answers
Bhushan Steel & Strips Operation & Maintenance Engineer Interview Experiences
1 interview found
I applied via Recruitment Consulltant and was interviewed in Apr 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Transformer, Motor, electrical drawing
- Q2. A motor suddenly stop then what you will do
- Ans.
I will check for any visible faults and then proceed with troubleshooting.
Check for any visible faults like loose connections, blown fuses, or tripped circuit breakers.
If there are no visible faults, use a multimeter to check for continuity and resistance.
Check the motor's bearings and lubrication.
If necessary, replace any faulty components or call for technical support.
After fixing the issue, test the motor to ensure
- Q3. Transformer safety device and its work
- Ans.
Transformer safety devices are used to protect transformers from damage and prevent accidents.
The most common safety device is the Buchholz relay, which detects gas and oil accumulation in the transformer tank and trips the circuit breaker to prevent further damage.
Other safety devices include pressure relief valves, which release excess pressure in the transformer tank, and temperature sensors, which monitor the tempe...
Top trending discussions
Interview questions from similar companies
Operation & Maintenance Engineer Interview Questions & Answers
Tata Steel
Anonymous
posted on 10 Apr 2024
Selected
I applied via Naukri.com and was interviewed in Mar 2024. There was 1 interview round.
(1 Question)
- Q1. How to identification phase sequence in R, Y, B?
- Ans.
Phase sequence in R, Y, B can be identified using a phase sequence indicator or a multimeter.
Use a phase sequence indicator to determine the correct sequence of R, Y, B phases.
Connect the phase sequence indicator to the three phases and observe the direction of rotation of the indicator to identify the sequence.
Alternatively, use a multimeter to measure the voltage between each pair of phases and determine the correct ...
Interview Preparation Tips
- Distribution Transformers
- Switchgear
I applied via Recruitment Consultant and was interviewed in Apr 2020. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. About Heat treatment
- Q2. About previous experience
- Q3. About metallurgical testing
- Q4. Quality documentation and quality tools
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Question Related to my job description about utilities equipment and maintenance
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Jan 2021. There were 5 interview rounds.
Interview Questionnaire
1 Question
- Q1. About insulation class of motors, working principle of induction motor
Interview Preparation Tips
I applied via Referral and was interviewed before Mar 2021. There was 1 interview round.
(1 Question)
- Q1. Basic Electrical questions
Interview Preparation Tips
I applied via Naukri.com and was interviewed before May 2021. There was 1 interview round.
(1 Question)
- Q1. What is proxy? what is smps? what is encoder? Star delta working
- Ans.
Proxy is an intermediary server that acts as a gateway between clients and servers. SMPS is a power supply unit that converts AC to DC. Encoder is a device that converts motion into digital signals. Star delta is a method of starting three-phase motors.
Proxy helps in hiding the identity of clients and servers.
SMPS is commonly used in computers and other electronic devices.
Encoders are used in robotics, automation, and ...
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. Iron-Carbon Phase diagram, CCT curves, Pearlite,lever rule
Interview Preparation Tips
Experience: It was online test and was aptitude section first. Questions were easy and later there were questions on English grammer and comprehension which would require 10th level knowledge. At last there will be 25 technical questions. Surprisingly, most of them were factual.
Tips: Pick up any aptitude book and practise it to improve your problem solving speed.
Duration: 1 hour 30 minutes
Total Questions: 90
Round: Technical + HR Interview
Experience: I was asked to draw Iron Carbon phase diagram and CCT curves. I was also tested about lever rule and eutectoid composition.
Tips: Coursework would suffice
College Name: IIT Madras
kunal mamile
Interview Questionnaire
1 Question
- Q1. Tell me about yourself. Questions regarding Iron-Carbon diagram and CCT curves
Interview Preparation Tips
Experience: Basically there were some aptitude questions which were easy and English grammer(10th level) was asked. About technical aspect, questions were mostly factual.
Tips: For technical, prepare specifically for factual questions from your coursework. For aptitude part, focus on speed of solving problems.
Duration: 1 hour 30 minutes
Total Questions: 90
Round: Technical + HR Interview
Experience: I was asked about myself and extra-curricular activities first followed by some technical questions about iron-carbon phase diagram and lever rule.
Tips: Course work would suffice
College Name: IIT Madras
I applied via Referral and was interviewed before Jan 2019. There were 6 interview rounds.
Interview Questionnaire
7 Questions
- Q1. Say something about urself
- Q2. Work experience
- Q3. Technical with hr and the concerned department head asked various question
- Q4. Hr round
- Q5. Salary negotiations
- Q6. 3.6 salary I was offered in the year 2010
- Q7. Excepted
Interview Preparation Tips
Bhushan Steel & Strips Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Maintenance Engineer Interview Questions
- Mechanical Maintenance Engineer Interview Questions
- Electrical Maintenance Engineer Interview Questions
- Maintenance Manager Interview Questions
- Maintenance Supervisor Interview Questions
- Maintenance Fitter Interview Questions
- Maintenance Electrician Interview Questions
- Maintenance Executive Interview Questions
- Show more
Bhushan Steel & Strips Operation & Maintenance Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
|
Junior Engineer
6
salaries
|  ₹1.8 L/yr - ₹3.3 L/yr |
|
Assistant Engineer
5
salaries
| ₹1.3 L/yr - ₹4 L/yr |
|
Assistant Manager
4
salaries
| ₹5 L/yr - ₹8.5 L/yr |
|
Engineer
4
salaries
| ₹1.4 L/yr - ₹4.1 L/yr |
|
Senior Engineer
4
salaries
| ₹3 L/yr - ₹4.9 L/yr |
Tata Steel
JSW Steel
Jindal Stainless
Jindal Saw
- Home >
- Interviews >
- Bhushan Steel & Strips Interview Questions >
- Bhushan Steel & Strips Operation & Maintenance Engineer Interview Questions
