Upload Button Icon Add office photos

Filter interviews by

Bhushan Power & Steel Supervisor Interview Questions and Answers for Freshers

Updated 16 Feb 2022

Interview questions from similar companies

I applied via Job Fair and was interviewed in Feb 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is electicity,resistance,
  • Ans. 

    Electricity is the flow of electric charge, while resistance is the measure of opposition to the flow of electric current.

    • Electricity is the movement of electrons through a conductor.

    • Resistance is the property of a material that hinders the flow of electric current.

    • Resistance is measured in ohms (Ω).

    • Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied and inverse...

  • Answered by AI
  • Q2. What is wark and transformer
  • Ans. 

    A wark is a type of work or labor, while a transformer is an electrical device that transfers energy between circuits.

    • Wark refers to physical or mental effort put into a task or job.

    • A transformer is a device that changes the voltage of an alternating current.

    • Transformers are commonly used in electrical power distribution systems.

    • They can step up or step down the voltage depending on the application.

    • For example, a step-...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am i.t.i(electrician) .,work for technical dipartmrnt for helper job from zindal compani

I applied via Walk-in and was interviewed in Aug 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Whre are you from. What is your qualifications. How much your experience and whare
Round 3 - One-on-one 

(1 Question)

  • Q1. From which company you job

Interview Preparation Tips

Interview preparation tips for other job seekers - To be nice good communication and I am satisfied
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. Classifications of fire
  • Ans. 

    Classifications of fire include Class A, B, C, D, and K based on the type of fuel involved.

    • Class A fires involve ordinary combustibles such as wood and paper.

    • Class B fires involve flammable liquids like gasoline and oil.

    • Class C fires involve energized electrical equipment.

    • Class D fires involve combustible metals like magnesium and titanium.

    • Class K fires involve cooking oils and fats.

  • Answered by AI
  • Q2. Some about my experience related questions
  • Q3. What will do an emergency
  • Ans. 

    During an emergency, I will assess the situation, ensure the safety of all individuals, implement emergency procedures, and communicate with emergency services.

    • Assess the situation to determine the type and severity of the emergency

    • Ensure the safety of all individuals by evacuating the area if necessary

    • Implement emergency procedures such as first aid, fire suppression, or lockdown protocols

    • Communicate with emergency se...

  • Answered by AI
  • Q4. What is hot work & their hazards
  • Ans. 

    Hot work refers to any work that involves open flames, sparks, or high temperatures, posing fire and burn hazards.

    • Examples of hot work include welding, cutting, brazing, soldering, and grinding.

    • Hazards of hot work include fire, burns, explosions, and toxic fumes.

    • Proper safety measures such as fire watch, personal protective equipment, and hot work permits are essential to prevent accidents.

    • Training workers on safe hot ...

  • Answered by AI
  • Q5. Unsafe act and unsafe conditions

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice

I applied via Naukri.com and was interviewed in May 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is the LOTO system ?
  • Ans. 

    LOTO system stands for Lockout/Tagout system, which is a safety procedure used to ensure that dangerous machines are properly shut off and not started up again until maintenance or repairs are completed.

    • LOTO system is used to control hazardous energy sources during maintenance or repair work.

    • It involves locking and tagging the energy-isolating devices to prevent accidental startup.

    • The system helps protect workers from ...

  • Answered by AI
  • Q2. What is the fire ?
  • Ans. 

    Fire is a rapid chemical reaction that releases heat, light, and various gases.

    • Fire is a combustion process that occurs when fuel, oxygen, and heat are present.

    • It produces flames, smoke, and heat energy.

    • Fire can spread rapidly and cause damage to property and harm to living beings.

    • Different types of fires require specific extinguishing methods, such as water, foam, or CO2.

    • Examples of fire hazards include electrical fau...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - To not avoid unsafe act & condition

Interview Questionnaire 

1 Question

  • Q1. Working on sms(steel ladle lining)

I applied via Naukri.com and was interviewed in May 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. 1 tell me about yourself 2 what is customer support 3what is empathy apology 4 speak at given topic for 2 to 3 minutes like global warming etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't hesitate to answer ,answer question smoothly ,prepare before for few frequent questions asked in interviews,

I applied via Job Fair and was interviewed in Feb 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is electicity,resistance,
  • Ans. 

    Electricity is the flow of electric charge, while resistance is the measure of opposition to the flow of electric current.

    • Electricity is the movement of electrons through a conductor.

    • Resistance is the property of a material that hinders the flow of electric current.

    • Resistance is measured in ohms (Ω).

    • Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage applied and inverse...

  • Answered by AI
  • Q2. What is wark and transformer
  • Ans. 

    A wark is a type of work or labor, while a transformer is an electrical device that transfers energy between circuits.

    • Wark refers to physical or mental effort put into a task or job.

    • A transformer is a device that changes the voltage of an alternating current.

    • Transformers are commonly used in electrical power distribution systems.

    • They can step up or step down the voltage depending on the application.

    • For example, a step-...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am i.t.i(electrician) .,work for technical dipartmrnt for helper job from zindal compani

I applied via Job Fair and was interviewed in May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is responsibility of civil engineer
Round 3 - Assignment 

Completed building projects

Interview Preparation Tips

Interview preparation tips for other job seekers - To increase experience and gain high knowledge

I applied via Walk-in and was interviewed in Nov 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. About conveyor and mechanical maintenance and safety they asked me .

Interview Preparation Tips

Interview preparation tips for other job seekers - I have trained about this and answered.

Bhushan Power & Steel Interview FAQs

How many rounds are there in Bhushan Power & Steel Supervisor interview for freshers?
Bhushan Power & Steel interview process for freshers usually has 1 rounds. The most common rounds in the Bhushan Power & Steel interview process for freshers are Technical.

Tell us how to improve this page.

Bhushan Power & Steel Supervisor Salary
based on 18 salaries
₹1.3 L/yr - ₹5.3 L/yr
8% less than the average Supervisor Salary in India
View more details

Bhushan Power & Steel Supervisor Reviews and Ratings

based on 11 reviews

4.4/5

Rating in categories

3.7

Skill development

4.0

Work-Life balance

4.0

Salary & Benefits

4.4

Job Security

3.8

Company culture

3.7

Promotions/Appraisal

4.1

Work Satisfaction

Explore 11 Reviews and Ratings
Engineer
382 salaries
unlock blur

₹2.6 L/yr - ₹7.5 L/yr

Senior Engineer
339 salaries
unlock blur

₹3.5 L/yr - ₹9.5 L/yr

Assistant Engineer
246 salaries
unlock blur

₹2.2 L/yr - ₹7 L/yr

Assistant Manager
194 salaries
unlock blur

₹4.3 L/yr - ₹11.9 L/yr

Mechanical Engineer
126 salaries
unlock blur

₹2.5 L/yr - ₹7.4 L/yr

Explore more salaries
Compare Bhushan Power & Steel with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Jindal Steel and Power

4.0
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview