Upload Button Icon Add office photos

Bharat Petroleum

Compare button icon Compare button icon Compare

Filter interviews by

Bharat Petroleum Site Engineer Interview Questions and Answers

Updated 4 May 2023

Bharat Petroleum Site Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

General aptitude test

Round 3 - One-on-one 

(1 Question)

  • Q1. Thermodynamics and heat mass transfer subject
Round 4 - One-on-one 

(1 Question)

  • Q1. Subject-thermodynmics

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on your aim

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is water cement ratio
  • Ans. 

    Water cement ratio is the ratio of the weight of water to the weight of cement used in a concrete mix.

    • Water cement ratio is a crucial factor in determining the strength and durability of concrete.

    • A lower water cement ratio results in stronger and more durable concrete.

    • The ideal water cement ratio varies depending on the type of concrete mix and its intended use.

    • For example, a typical water cement ratio for general purp

  • Answered by AI
  • Q2. How to observe water test
  • Ans. 

    To observe a water test, ensure proper equipment is used, follow testing procedures accurately, record results, and analyze for any abnormalities.

    • Use clean and calibrated equipment for accurate results

    • Follow testing procedures as per standard guidelines

    • Record all observations and results in a logbook

    • Analyze the results for any abnormalities or deviations from expected values

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Waterproofing knowledge
  • Q2. How to stop waterproofing condition
  • Ans. 

    To stop waterproofing condition, proper surface preparation, selection of appropriate waterproofing materials, and regular maintenance are essential.

    • Ensure proper surface preparation before applying waterproofing materials

    • Select appropriate waterproofing materials based on the specific requirements of the project

    • Regularly inspect and maintain the waterproofing system to prevent any damage or leaks

    • Address any issues or

  • Answered by AI

I applied via Walk-in and was interviewed in Jul 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. The recruiter asking different quantity and estimation

Interview Preparation Tips

Interview preparation tips for other job seekers - The interview was technically is major test.1 hour . recruiter wanted my communication skills and knowledge mostly asked related b tech curriculum it is civil engineering related topics
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Recruitment Consulltant and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the main components part of cement?
  • Ans. 

    The main components of cement are limestone, clay, and gypsum.

    • Limestone: primary raw material used in cement production

    • Clay: provides silica, alumina, and iron oxide necessary for cement

    • Gypsum: regulates setting time and helps control the rate of hardening

  • Answered by AI
  • Q2. What is the maximum percentage (%) of carbon and silicon using in cement?
  • Ans. 

    The maximum percentage of carbon and silicon in cement is typically around 5% and 3% respectively.

    • Maximum percentage of carbon in cement is around 5%

    • Maximum percentage of silicon in cement is around 3%

    • Higher percentages can affect the quality and properties of the cement

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Indian Oil Corporation Site Engineer interview:
  • Building construction and materi
  • Cement,sand, aggregate
  • Reinforced construction
  • Building project
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(8 Questions)

  • Q1. HT and lt line meking
  • Q2. Transfer installation and incoming line
  • Q3. Cip costing and testing
  • Q4. Pole grouting and moffing
  • Q5. Meter installation and meter check
  • Q6. Quality check and concreting resio
  • Q7. Outing going line
  • Q8. Cable abc cable

Interview Preparation Tips

Interview preparation tips for other job seekers - Network issue resolved

I applied via Recruitment Consultant and was interviewed in Dec 2020. There were 6 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. 1st round is technical , 2nd is values & behaviors , 3rd is assessment road
  • Q2. Be clear on values & behaviours , practice assement round offline before attempting

Interview Preparation Tips

Interview preparation tips for other job seekers - its a long process may take 2-3 months , there is internal & external assement before selectioon is finalized . Good luck
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Transformer testing
  • Q2. Transformer protection
  • Q3. SAP Maintenance module
  • Q4. Spare maintenance philosophy
  • Ans. 

    Spare maintenance philosophy focuses on maintaining spare parts to minimize downtime and ensure efficient operations.

    • Spare maintenance philosophy aims to have a sufficient inventory of spare parts to quickly replace any faulty components.

    • It involves regular inspections and maintenance of spare parts to ensure their functionality and readiness.

    • The philosophy emphasizes proactive planning and forecasting to anticipate th...

  • Answered by AI
  • Q5. Planning strategy

Interview Preparation Tips

Topics to prepare for Shell Senior Engineer interview:
  • Maintenance straight
  • SAP
Interview preparation tips for other job seekers - Prepared your self according your experience. Most important resume should be as per experience

I applied via Company Website and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How will you identify if a pump is cavitating while working on a DCS panel?
  • Ans. 

    To identify if a pump is cavitating while working on a DCS panel, you can look for certain indicators.

    • Monitor the pump's suction pressure. If it is fluctuating or dropping below the specified range, it may indicate cavitation.

    • Check the pump's discharge pressure. If it is higher than normal, it could be a sign of cavitation.

    • Listen for unusual noises such as a rattling or grinding sound coming from the pump.

    • Inspect the p...

  • Answered by AI
  • Q2. How would you prepare a hydrocarbon vessel for vessel entry?
  • Ans. 

    To prepare a hydrocarbon vessel for vessel entry, follow these steps:

    • Ensure the vessel is properly isolated from the process and all sources of energy

    • Ventilate the vessel to remove any flammable or toxic gases

    • Perform a thorough inspection of the vessel for any signs of leaks or damage

    • Implement proper lockout/tagout procedures to prevent accidental activation of equipment

    • Provide appropriate personal protective equipment...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for GAIL Senior Engineer interview:
  • Chemical Engineering
  • DCS Operations
Interview preparation tips for other job seekers - Try to answer the questions asked in simple words. The interviewer generally wants to judge an interviewee based on his understanding of the subject. When an applicant is appearing for an interview, he should share his experience and try to quote examples from his experience.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jan 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

My GD topic was renewable energy.

Round 2 - HR 

(7 Questions)

  • Q1. Tell me about yourself
  • Ans. 

    I am a Senior Engineer with 10+ years of experience in designing and implementing complex systems.

    • 10+ years of experience in engineering

    • Specialize in designing and implementing complex systems

    • Strong problem-solving skills

    • Experience with various programming languages such as Java, Python, and C++

  • Answered by AI
  • Q2. Why do you want to leave your previous company and join GAIL
  • Ans. 

    Seeking new challenges and growth opportunities at GAIL.

    • Desire for new challenges and opportunities for growth

    • Interested in working in a different industry or with different technologies

    • Attracted to GAIL's reputation and projects

    • Seeking a more collaborative and innovative work environment

  • Answered by AI
  • Q3. What do your parents do
  • Ans. 

    My parents are both retired now, but my father used to work as a civil engineer and my mother was a teacher.

    • Father worked as a civil engineer

    • Mother was a teacher

    • Both are retired now

  • Answered by AI
  • Q4. Have you ever visited Delhi earlier
  • Ans. 

    Yes, I have visited Delhi earlier for a business trip.

    • Visited Delhi for a business trip

    • Explored historical sites like Red Fort and Qutub Minar

    • Enjoyed local cuisine like butter chicken and chaat

  • Answered by AI
  • Q5. How did you reach Noida for interview
  • Q6. Where are you staying in Noida for interview process
  • Ans. 

    I am staying at a hotel in Sector 18, Noida for the interview process.

    • Staying at a hotel in Sector 18, Noida

    • Close to the interview location

    • Comfortable accommodation for the duration of the process

  • Answered by AI
  • Q7. Related family background
Round 3 - Technical 

(7 Questions)

  • Q1. Detailed technical questions about bearing, pump, furnace tubes (1st and 2nd pass)MOC, TLE MOC, heat exchanger tube MOC, TEMA codes and classification etc.
  • Q2. Decoking process of cracking furnace, Naphtha circuit of furnace with sketches,
  • Ans. 

    Decoking process involves removing coke deposits from cracking furnace and naphtha circuit to maintain efficiency.

    • Decoking process involves burning off coke deposits using controlled combustion.

    • Mechanical decoking involves using high-pressure water jets to remove coke deposits.

    • Chemical decoking involves using solvents or acids to dissolve coke deposits.

    • Regular decoking is essential to prevent blockages and maintain fur

  • Answered by AI
  • Q3. Detailed refrigeration cycles
  • Ans. 

    Refrigeration cycles are thermodynamic processes used in refrigerators and air conditioners to transfer heat from a low temperature reservoir to a high temperature reservoir.

    • Refrigeration cycles typically involve four main components: compressor, condenser, expansion valve, and evaporator.

    • The refrigerant undergoes a cycle of compression, condensation, expansion, and evaporation to absorb heat from the space being coole...

  • Answered by AI
  • Q4. Safety related questions which I couldn't answer well
  • Q5. Safety procedures before starting of hot job
  • Ans. 

    Safety procedures before starting a hot job include obtaining a hot work permit, conducting a hazard assessment, ensuring proper ventilation, and having fire extinguishing equipment nearby.

    • Obtain a hot work permit before starting any hot job

    • Conduct a hazard assessment to identify potential risks

    • Ensure proper ventilation in the work area to prevent buildup of flammable gases

    • Have fire extinguishing equipment nearby and r

  • Answered by AI
  • Q6. Furnace tubes Welding related questions
  • Q7. Scaffolding and insulation related general questions (easy)

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for GD and just keep enough technical knowledge on your field of experience. Be relaxed and give interview with happy face..don't be depressed if you couldn't answer any question during interview. If you don't know anything just say "I don't know" ...keep the things simple and give honest answer always.
Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Not Selected

I applied via Company Website and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Behavioral questions and resume delve

Round 2 - Case Study 

Pmi - product management information

Interview Preparation Tips

Interview preparation tips for other job seekers - study supply chain, product management information and presentation

Bharat Petroleum Interview FAQs

How many rounds are there in Bharat Petroleum Site Engineer interview?
Bharat Petroleum interview process usually has 4 rounds. The most common rounds in the Bharat Petroleum interview process are One-on-one Round, Resume Shortlist and Aptitude Test.
What are the top questions asked in Bharat Petroleum Site Engineer interview?

Some of the top questions asked at the Bharat Petroleum Site Engineer interview -

  1. Thermodynamics and heat mass transfer subj...read more
  2. Subject-thermodynm...read more

Tell us how to improve this page.

Bharat Petroleum Site Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Shell Interview Questions
4.0
 • 191 Interviews
Schlumberger Interview Questions
3.9
 • 139 Interviews
ExxonMobil Interview Questions
3.8
 • 64 Interviews
GAIL Interview Questions
4.4
 • 64 Interviews
bp Interview Questions
3.8
 • 61 Interviews
View all
Bharat Petroleum Site Engineer Salary
based on 25 salaries
₹2 L/yr - ₹5.3 L/yr
6% less than the average Site Engineer Salary in India
View more details

Bharat Petroleum Site Engineer Reviews and Ratings

based on 6 reviews

4.8/5

Rating in categories

4.5

Skill development

4.7

Work-life balance

4.7

Salary

4.7

Job security

4.5

Company culture

3.7

Promotions

4.5

Work satisfaction

Explore 6 Reviews and Ratings
Graduate Apprentice Trainee
233 salaries
unlock blur

₹1 L/yr - ₹5 L/yr

Assistant Manager
232 salaries
unlock blur

₹12 L/yr - ₹36 L/yr

Manager
163 salaries
unlock blur

₹16.2 L/yr - ₹40 L/yr

Graduate Apprenticeship Trainee
121 salaries
unlock blur

₹1.3 L/yr - ₹5 L/yr

Management Trainee
93 salaries
unlock blur

₹16 L/yr - ₹21.9 L/yr

Explore more salaries
Compare Bharat Petroleum with

Reliance Industries

4.0
Compare

Indian Oil Corporation

4.4
Compare

Shell

4.0
Compare

Hindustan Petroleum

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview