Balmer Lawrie Maintenance Engineer Interview Questions and Answers for Experienced

Q1. How will you identify if a pump is cavitating while working on a DCS panel?
Ans. 
To identify if a pump is cavitating while working on a DCS panel, you can look for certain indicators.
• Monitor the pump's suction pressure. If it is fluctuating or dropping below the specified range, it may indicate cavitation.

• Check the pump's discharge pressure. If it is higher than normal, it could be a sign of cavitation.

• Listen for unusual noises such as a rattling or grinding sound coming from the pump.

• Inspect the p...read more
Answered by AI
View 2 more answers
Q2. How would you prepare a hydrocarbon vessel for vessel entry?
Ans. 
To prepare a hydrocarbon vessel for vessel entry, follow these steps:
• Ensure the vessel is properly isolated from the process and all sources of energy

• Ventilate the vessel to remove any flammable or toxic gases

• Perform a thorough inspection of the vessel for any signs of leaks or damage

• Implement proper lockout/tagout procedures to prevent accidental activation of equipment

• Provide appropriate personal protective equipment...read more
Answered by AI
View 2 more answers

Q1. Explain for pump
Ans. 
A pump is a mechanical device used to move fluids from one place to another.
• Pumps are commonly used in various industries such as oil and gas, water treatment, and manufacturing.

• They can be classified into different types based on their principle of operation, such as centrifugal pumps and positive displacement pumps.

• Pumps can be powered by electricity, engines, or even manual operation.

• They are essential for maintaini...read more
Answered by AI
Add your answer
Q2. Explain for types of valves
Ans. 
There are four types of valves: gate valves, globe valves, ball valves, and butterfly valves.
• Gate valves are used to control the flow of fluid by raising or lowering a gate.

• Globe valves have a disc that moves up and down to control the flow of fluid.

• Ball valves use a rotating ball with a hole in it to control the flow of fluid.

• Butterfly valves have a disc that rotates to control the flow of fluid.
Answered by AI
Add your answer
Q3. Explain for screw pump
Ans. 
A screw pump is a type of positive displacement pump that uses rotating screws to move fluid.
• Screw pumps are commonly used in various industries, including oil and gas, wastewater treatment, and food processing.

• They consist of two or more intermeshing screws that rotate in opposite directions, creating a vacuum and pushing the fluid through the pump.

• Screw pumps are known for their high efficiency, low noise levels, and...read more
Answered by AI
Add your answer
Q4. Gear box working
Add your answer
Q5. How to work Fire engine with high pressure
Ans. 
Working with a fire engine under high pressure requires proper training and knowledge of the equipment.
• Ensure proper training on operating the fire engine with high pressure

• Understand the different components and controls of the fire engine

• Follow safety protocols and guidelines

• Maintain and inspect the fire engine regularly

• Practice efficient water management to maximize effectiveness

• Be aware of potential hazards and tak...read more
Answered by AI
Add your answer
Q6. PPE ALL QUESTIONS
Add your answer
Q7. Safety questions
Add your answer
Q8. Industrial safety
Add your answer
Q9. What is PPE& full fome
Ans. 
PPE stands for Personal Protective Equipment. Full form refers to the complete expansion of an acronym or abbreviation.
• PPE is equipment worn to minimize exposure to hazards that can cause injuries or illnesses.

• Examples of PPE include safety helmets, gloves, goggles, masks, and protective clothing.

• Full form refers to the complete expansion of an acronym or abbreviation, such as PPE (Personal Protective Equipment).
Answered by AI
Add your answer

Q1. Explain for pump
Ans. 
A pump is a mechanical device that moves fluids or gases by applying mechanical force.
• Pumps are used in various industries such as water treatment, oil and gas, and manufacturing.

• There are different types of pumps including centrifugal pumps, positive displacement pumps, and diaphragm pumps.

• Pumps work by creating a pressure difference to move the fluid from one place to another.

• Regular maintenance of pumps is essential...read more
Answered by AI
Add your answer
Q2. Explain for types of valves
Ans. 
There are four main types of valves: ball valves, gate valves, globe valves, and butterfly valves.
• Ball valves: used for on/off control without pressure drop, commonly used in gas and liquid applications

• Gate valves: used for on/off control with low pressure drop, commonly used in water and sewage systems

• Globe valves: used for regulating flow, commonly used in high-pressure steam systems

• Butterfly valves: used for on/off ...read more
Answered by AI
Add your answer
Q3. Explain for screw pump
Ans. 
A screw pump is a type of positive displacement pump that uses rotating screws to move fluid along the screw's axis.
• Screw pumps are known for their high efficiency and ability to handle high viscosity fluids.

• They are commonly used in industrial applications such as oil and gas, wastewater treatment, and food processing.

• Screw pumps can be classified into different types based on the number of screws, such as single scre
Answered by AI
Add your answer
Q4. Gear box working
Add your answer
Q5. How to work Fire engine with high pressure
Ans. 
To work a fire engine with high pressure, ensure proper training, follow safety protocols, adjust pressure settings, and use appropriate nozzles.
• Ensure proper training on how to operate the fire engine with high pressure

• Follow safety protocols to prevent accidents and injuries

• Adjust pressure settings according to the specific situation and requirements

• Use appropriate nozzles to control the flow and direction of water

• Re...read more
Answered by AI
Add your answer
Q6. PPE ALL QUESTIONS
Add your answer
Q7. Safety questions
Add your answer
Q8. Industrial safety
Add your answer
Q9. What is PPE& full fome
Ans. 
PPE stands for Personal Protective Equipment. It includes items like helmets, gloves, goggles, and full fome refers to the full form of PPE.
• PPE stands for Personal Protective Equipment

• It includes items like helmets, gloves, goggles, etc.

• Full fome refers to the full form of PPE, which is Personal Protective Equipment
Answered by AI
Add your answer

Q1. I was asked to make a presentation on laser technology.
Add your answer

Knowledge of the English language, its vocabulary and comprehension. Ability to solve basic mathematical problem, which shows the capacity to use an analytical approach to everyday puzzles.