Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Bajaj Auto Team. If you also belong to the team, you can get access from here

Bajaj Auto Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Bajaj Auto Manufacturing Engineer Interview Questions and Answers

Updated 28 May 2024

Bajaj Auto Manufacturing Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-

I applied via Campus Placement

Round 1 - Aptitude Test 

Its all logical question on the basis of automobile engine and vehicle including aptitude questions.

Round 2 - HR 

(2 Questions)

  • Q1. Where the most torque in the vehicle induced? At the output shaft or wheel?
  • Ans. 

    Torque is induced at the output shaft of the vehicle.

    • Torque is typically induced at the output shaft of the vehicle, where the engine power is transferred to the transmission system.

    • The output shaft is responsible for transmitting power to the wheels, where the torque is then used to propel the vehicle forward.

    • In some cases, additional torque can be induced at the wheels themselves, such as in electric vehicles with in

  • Answered by AI
  • Q2. Difference between fuel injection and carburettor? What are the advantages and disadvantage of both?
  • Ans. 

    Fuel injection is a modern method of delivering fuel to the engine using injectors, while carburettor is an older method using a carburettor to mix air and fuel.

    • Fuel injection delivers fuel directly into the combustion chamber, resulting in better fuel efficiency and performance.

    • Carburettor mixes air and fuel in a chamber before delivering it to the engine, which can lead to uneven fuel distribution and lower efficienc...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - For diploma engineers, there is no fixed role in the industry. It may be operator, PPC buyer, manufacturing engineer, line leader, maintenance engineer, cnc machine operator, painter and they can change your role anytime they want. Even what is your stream of diploma, you can directly offered any one of the above, most of people are send to assembly shops as a operator. Very less chances that you get any technical role, its depends on your luck.

Interview questions from similar companies

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras

I applied via Campus Placement and was interviewed before Jan 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. ITI mein kitne practical Hote Hain
  • Q2.  name aur adress
  • Ans. 

    The question is asking for the candidate's name and address.

    • Provide your full name and complete address.

    • Include your street name, city, state, and zip code.

    • Ensure the address is accurate and up to date.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .

I applied via Campus Placement

Interview Preparation Tips

Round: Technical Interview
Experience: It was really nice experience. The interview was based on the resume. The panel mostly asked about the projects and the internships.
Tips: Resume based questions.

Skill Tips: understand the concepts of IC engines and other basic mechancial concepts
Skills: Core Mechanical Concepts
Duration: 2
College Name: IIT Madras
Motivation: It is one of the best company for engine R&D and hopefully I will get a better exposure and understanding of the concepts.

I was interviewed in Jul 2017.

Interview Preparation Tips

Skills: Qulity, Quick Maths

I applied via Campus Placement and was interviewed in Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How to get incriment in salary
  • Q2. How much you have experience?

Interview Questionnaire 

4 Questions

  • Q1. How does a diesel genrator work?
  • Ans. 

    A diesel generator works by converting diesel fuel into mechanical energy which is then converted into electrical energy.

    • Diesel fuel is injected into the combustion chamber where it ignites and creates high pressure gases that push the piston down, creating mechanical energy.

    • The mechanical energy is then converted into electrical energy through the use of an alternator.

    • The alternator uses a magnetic field and a conduct...

  • Answered by AI
  • Q2. How a diesel engine works
  • Ans. 

    A diesel engine works by compressing air in the cylinder, which heats up and ignites the fuel injected into the cylinder.

    • Air is drawn into the cylinder and compressed by the piston

    • The compressed air heats up and ignites the fuel injected into the cylinder

    • The explosion pushes the piston down, which turns the crankshaft and powers the engine

    • Diesel engines are more efficient than gasoline engines because they compress the...

  • Answered by AI
  • Q3. Why there is no differential in a train
  • Ans. 

    A train doesn't need a differential because its wheels are fixed to the same axle and rotate at the same speed.

    • Train wheels are fixed to the same axle

    • Wheels rotate at the same speed

    • Differential is used in vehicles with wheels that rotate at different speeds

    • Differential allows for smooth turning

  • Answered by AI
  • Q4. Why petrol engines comparison ratio low when compared to a diesel engine
  • Ans. 

    Petrol engines have lower compression ratios compared to diesel engines.

    • Petrol engines have lower compression ratios to prevent knocking or detonation.

    • Diesel engines have higher compression ratios to ignite the fuel without spark plugs.

    • Higher compression ratios in diesel engines result in better fuel efficiency and torque.

    • Petrol engines require lower compression ratios to accommodate the lower octane rating of petrol f...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Resume was selected and I was invited for an interview
Tips: Resume was selected and I was invited for an interview

Round: Technical + HR Interview
Experience: Sir question was thought and I was giving a quick answer
Tips: Do not give any answer without tension

Skills: Personality, Skills Of Explaining Things, Knowledge About Industries, Knowledge In Ic Engines, Talking Ability

I was interviewed in Aug 2020.

Interview Questionnaire 

1 Question

  • Q1. BS6, BS4 engine EATS Fireing order of 6 cylinder, 4 cylinder
  • Ans. 

    The firing order of a 6-cylinder engine is different from that of a 4-cylinder engine.

    • The firing order determines the sequence in which the cylinders ignite their fuel-air mixture.

    • In a 6-cylinder engine, the firing order can vary depending on the engine design.

    • A common firing order for a 6-cylinder engine is 1-5-3-6-2-4.

    • In a 4-cylinder engine, the firing order is typically 1-3-4-2.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be conference & well dressed formel

I applied via Company Website and was interviewed before Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. What's your background?
  • Q2. Why i intrested work in your company?
  • Ans. Because self career and company growth
  • Answered by Virendra Kumar Prajapati
  • Q3. What is your strength?
  • Q4. Confidence , work & handling
  • Q5. What is your designation in your present company?
  • Q6. Production supervisor

Interview Preparation Tips

Interview preparation tips for other job seekers - Very nice and small. Please give me one chance sir.
Contribute & help others!
anonymous
You can choose to be anonymous

Bajaj Auto Interview FAQs

How many rounds are there in Bajaj Auto Manufacturing Engineer interview?
Bajaj Auto interview process usually has 2 rounds. The most common rounds in the Bajaj Auto interview process are Aptitude Test and HR.
What are the top questions asked in Bajaj Auto Manufacturing Engineer interview?

Some of the top questions asked at the Bajaj Auto Manufacturing Engineer interview -

  1. Where the most torque in the vehicle induced? At the output shaft or whe...read more
  2. Difference between fuel injection and carburettor? What are the advantages and ...read more

Recently Viewed

SALARIES

CareEdge Ratings

INTERVIEWS

Square Yards

No Interviews

SALARIES

SBI Cards & Payment Services

SALARIES

Ather Energy

SALARIES

Mahindra Last Mile Mobility

SALARIES

Skylark Drones

INTERVIEWS

Trade Brains

No Interviews

INTERVIEWS

Pepper Content

20 top interview questions

INTERVIEWS

Trade Brains

No Interviews

SALARIES

Toyota Financial Services

Tell us how to improve this page.

Bajaj Auto Manufacturing Engineer Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more
Bajaj Auto Manufacturing Engineer Salary
based on 49 salaries
₹1.8 L/yr - ₹9 L/yr
5% less than the average Manufacturing Engineer Salary in India
View more details

Bajaj Auto Manufacturing Engineer Reviews and Ratings

based on 8 reviews

3.7/5

Rating in categories

3.2

Skill development

3.8

Work-life balance

2.3

Salary

3.7

Job security

1.8

Company culture

1.9

Promotions

3.3

Work satisfaction

Explore 8 Reviews and Ratings
Line Engineer
1.6k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
798 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Company Trainee
580 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
411 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Area Sales Manager
357 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bajaj Auto with

Hero MotoCorp

4.1
Compare

TVS Motor

4.0
Compare

Mahindra & Mahindra

4.1
Compare

Maruti Suzuki

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview