Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Bajaj Auto Team. If you also belong to the team, you can get access from here

Bajaj Auto Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Bajaj Auto Industrial Engineer Interview Questions and Answers

Updated 13 Jun 2020

Bajaj Auto Industrial Engineer Interview Experiences

1 interview found

I applied via Recruitment Consultant and was interviewed in Dec 2019. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Recent developments in Industrial Engineering, How to find bottleneck without any documents on assembly line
  • Ans. 

    To find bottleneck without any documents on assembly line, observe the flow of materials and workers, analyze production rates, and identify areas with high wait times or low productivity.

    • Observe the flow of materials and workers on the assembly line

    • Analyze production rates and identify areas with high wait times

    • Look for areas with low productivity or frequent delays

    • Conduct time studies to measure the time taken at eac...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be honest and confident

Interview questions from similar companies

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras

I applied via Campus Placement and was interviewed before Jan 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. ITI mein kitne practical Hote Hain
  • Q2.  name aur adress
  • Ans. 

    The question is asking for the candidate's name and address.

    • Provide your full name and complete address.

    • Include your street name, city, state, and zip code.

    • Ensure the address is accurate and up to date.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .

I applied via Campus Placement

Interview Preparation Tips

Round: Technical Interview
Experience: It was really nice experience. The interview was based on the resume. The panel mostly asked about the projects and the internships.
Tips: Resume based questions.

Skill Tips: understand the concepts of IC engines and other basic mechancial concepts
Skills: Core Mechanical Concepts
Duration: 2
College Name: IIT Madras
Motivation: It is one of the best company for engine R&D and hopefully I will get a better exposure and understanding of the concepts.

I was interviewed in Jul 2017.

Interview Preparation Tips

Skills: Qulity, Quick Maths

I applied via Campus Placement and was interviewed in Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How to get incriment in salary
  • Q2. How much you have experience?

Interview Questionnaire 

4 Questions

  • Q1. How does a diesel genrator work?
  • Ans. 

    A diesel generator works by converting diesel fuel into mechanical energy which is then converted into electrical energy.

    • Diesel fuel is injected into the combustion chamber where it ignites and creates high pressure gases that push the piston down, creating mechanical energy.

    • The mechanical energy is then converted into electrical energy through the use of an alternator.

    • The alternator uses a magnetic field and a conduct...

  • Answered by AI
  • Q2. How a diesel engine works
  • Ans. 

    A diesel engine works by compressing air in the cylinder, which heats up and ignites the fuel injected into the cylinder.

    • Air is drawn into the cylinder and compressed by the piston

    • The compressed air heats up and ignites the fuel injected into the cylinder

    • The explosion pushes the piston down, which turns the crankshaft and powers the engine

    • Diesel engines are more efficient than gasoline engines because they compress the...

  • Answered by AI
  • Q3. Why there is no differential in a train
  • Ans. 

    A train doesn't need a differential because its wheels are fixed to the same axle and rotate at the same speed.

    • Train wheels are fixed to the same axle

    • Wheels rotate at the same speed

    • Differential is used in vehicles with wheels that rotate at different speeds

    • Differential allows for smooth turning

  • Answered by AI
  • Q4. Why petrol engines comparison ratio low when compared to a diesel engine
  • Ans. 

    Petrol engines have lower compression ratios compared to diesel engines.

    • Petrol engines have lower compression ratios to prevent knocking or detonation.

    • Diesel engines have higher compression ratios to ignite the fuel without spark plugs.

    • Higher compression ratios in diesel engines result in better fuel efficiency and torque.

    • Petrol engines require lower compression ratios to accommodate the lower octane rating of petrol f...

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Resume was selected and I was invited for an interview
Tips: Resume was selected and I was invited for an interview

Round: Technical + HR Interview
Experience: Sir question was thought and I was giving a quick answer
Tips: Do not give any answer without tension

Skills: Personality, Skills Of Explaining Things, Knowledge About Industries, Knowledge In Ic Engines, Talking Ability

I was interviewed in Aug 2020.

Interview Questionnaire 

1 Question

  • Q1. BS6, BS4 engine EATS Fireing order of 6 cylinder, 4 cylinder
  • Ans. 

    The firing order of a 6-cylinder engine is different from that of a 4-cylinder engine.

    • The firing order determines the sequence in which the cylinders ignite their fuel-air mixture.

    • In a 6-cylinder engine, the firing order can vary depending on the engine design.

    • A common firing order for a 6-cylinder engine is 1-5-3-6-2-4.

    • In a 4-cylinder engine, the firing order is typically 1-3-4-2.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be conference & well dressed formel

I applied via Company Website and was interviewed before Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. What's your background?
  • Q2. Why i intrested work in your company?
  • Ans. Because self career and company growth
  • Answered by Virendra Kumar Prajapati
  • Q3. What is your strength?
  • Q4. Confidence , work & handling
  • Q5. What is your designation in your present company?
  • Q6. Production supervisor

Interview Preparation Tips

Interview preparation tips for other job seekers - Very nice and small. Please give me one chance sir.

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 999 Interviews
Maruti Suzuki Interview Questions
4.2
 • 586 Interviews
Hero MotoCorp Interview Questions
4.1
 • 334 Interviews
TVS Motor Interview Questions
4.0
 • 313 Interviews
Ashok Leyland Interview Questions
4.1
 • 239 Interviews
Royal Enfield Interview Questions
4.2
 • 152 Interviews
Ford Motor Interview Questions
4.4
 • 145 Interviews
View all
Bajaj Auto Industrial Engineer Salary
based on 4 salaries
₹6.6 L/yr - ₹13 L/yr
103% more than the average Industrial Engineer Salary in India
View more details
Line Engineer
1.6k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
798 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Company Trainee
579 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
421 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Trainee Engineer
356 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bajaj Auto with

Hero MotoCorp

4.1
Compare

TVS Motor

4.0
Compare

Mahindra & Mahindra

4.1
Compare

Maruti Suzuki

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview