i
Bajaj Auto
Filter interviews by
Clear (1)
I applied via Campus Placement and was interviewed in Nov 2020. There were 4 interview rounds.
I applied via Campus Placement and was interviewed before Feb 2020. There were 5 interview rounds.
Addendum and dedendum are terms used in gear design to describe specific parts of a gear tooth.
Addendum is the distance between the pitch circle and the top of the gear tooth.
Dedendum is the distance between the pitch circle and the bottom of the gear tooth.
Addendum and dedendum are important in determining the strength and durability of gears.
For gears to mesh properly, the addendum of one gear must align with the ded...
DTSi technology is a patented technology used in Bajaj motorcycles for better fuel efficiency and performance.
DTSi stands for Digital Twin Spark Ignition
It uses two spark plugs to ignite the fuel mixture in the combustion chamber
This results in better combustion and fuel efficiency
It also leads to smoother engine operation and reduced emissions
Bajaj Pulsar is a popular motorcycle model that uses DTSi technology
2 stroke engines have a power stroke in each revolution, while 4 stroke engines have a power stroke in every other revolution.
2 stroke engines have a simpler design and are lighter than 4 stroke engines.
2 stroke engines have a higher power-to-weight ratio compared to 4 stroke engines.
4 stroke engines are more fuel-efficient and produce less pollution than 2 stroke engines.
Examples of 2 stroke engines include chainsaws,...
Compression ratio for diesel is higher than petrol due to their different combustion characteristics.
Compression ratio is the ratio of the volume of the combustion chamber from its largest capacity to its smallest capacity.
Diesel engines have a higher compression ratio than petrol engines due to their different combustion characteristics.
The compression ratio for diesel engines typically ranges from 15:1 to 20:1, while...
Explanation of Carnot and Diesel cycles through diagrams and examples
Carnot cycle is a theoretical cycle that involves four reversible processes: isothermal expansion, adiabatic expansion, isothermal compression, and adiabatic compression
Diesel cycle is a practical cycle used in diesel engines that involves four processes: adiabatic compression, constant pressure heat addition, adiabatic expansion, and constant volume ...
The ratio of fuel and air mixture in combustion engine is called air-fuel ratio.
Air-fuel ratio is the amount of air mixed with fuel in the combustion chamber of an engine.
The ideal air-fuel ratio for gasoline engines is 14.7:1.
The air-fuel ratio can be adjusted to optimize engine performance and fuel efficiency.
A rich air-fuel ratio (more fuel, less air) can cause poor fuel economy and increased emissions.
A lean air-fu...
Top trending discussions
I applied via Campus Placement and was interviewed in Jun 2020. There were 5 interview rounds.
I applied via Campus Placement
I applied via Referral and was interviewed before Sep 2017. There were 2 interview rounds.
I applied via Recruitment Consultant and was interviewed before Apr 2020. There were 5 interview rounds.
Yes, I am aware of electronics architectures of commercial vehicles.
I have experience working with CAN (Controller Area Network) bus systems.
I am familiar with the various electronic control units (ECUs) used in commercial vehicles.
I understand the importance of proper wiring and grounding in electronic systems.
I have knowledge of diagnostic tools and software used for troubleshooting electronic issues.
I am aware of th...
Brakes are required in vehicles to slow down or stop the vehicle when necessary.
Brakes help to prevent accidents by allowing the driver to slow down or stop the vehicle when necessary
They also help to maintain control of the vehicle while driving
Different types of brakes include disc brakes, drum brakes, and anti-lock brakes
Regular maintenance of brakes is important to ensure they are functioning properly
Ackerman angle is the angle formed between the steering axis and a line drawn through the center of the wheel.
It is used in the design of steering systems for vehicles.
It helps to determine the turning radius of a vehicle.
The angle varies depending on the type of vehicle and its intended use.
A larger Ackerman angle is used for vehicles that require tighter turning radius, such as go-karts.
A smaller Ackerman angle is us...
I applied via Naukri.com and was interviewed before Oct 2020. There were 3 interview rounds.
Stress-strain curve shows the relationship between stress and strain in a material. It's significant in designing structures.
The curve helps in determining the material's strength, stiffness, and ductility.
It also helps in selecting the appropriate material for a specific application.
The curve can be used to predict the behavior of a material under different loading conditions.
The area under the curve represents the en...
I applied via Naukri.com and was interviewed before Mar 2021. There was 1 interview round.
I applied via Referral and was interviewed before Feb 2022. There were 2 interview rounds.
I applied via Referral and was interviewed in Dec 2019. There was 1 interview round.
UG refers to undergraduate education while PG refers to postgraduate education.
UG is the first level of higher education after completing secondary education.
PG is pursued after completing UG and is a higher level of education.
UG courses are generally of 3-4 years duration while PG courses are of 1-2 years duration.
UG courses provide a broad understanding of a subject while PG courses provide in-depth knowledge and spe...
I am willing to work in the Marketing department.
I have a strong interest in marketing and have taken relevant courses in college.
I have experience in creating marketing campaigns and analyzing market trends.
I am skilled in social media marketing and have successfully managed social media accounts for small businesses.
I am a creative thinker and enjoy coming up with innovative marketing strategies.
I am a team player an...
based on 15 reviews
Rating in categories
Line Engineer
1.6k
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
800
salaries
| ₹0 L/yr - ₹0 L/yr |
Company Trainee
582
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
425
salaries
| ₹0 L/yr - ₹0 L/yr |
Area Sales Manager
357
salaries
| ₹0 L/yr - ₹0 L/yr |
Hero MotoCorp
TVS Motor
Mahindra & Mahindra
Maruti Suzuki