Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by ArcelorMittal Nippon Steel Team. If you also belong to the team, you can get access from here

ArcelorMittal Nippon Steel Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

ArcelorMittal Nippon Steel Interview Questions and Answers

Updated 17 Jun 2025
Popular Designations

156 Interview questions

A Diploma Trainee Engineer was asked 1mo ago
Q. What is a turbine, and what types are used in the industry?
Ans. 

A turbine is a mechanical device that converts fluid energy into mechanical energy, widely used in power generation and propulsion.

  • Types of Turbines: Common types include steam turbines, gas turbines, and water turbines, each suited for different energy sources.

  • Power Generation: Turbines are essential in power plants, converting steam or water flow into electricity, e.g., hydroelectric dams.

  • Aerospace Applications:...

View all Diploma Trainee Engineer interview questions
An Electrical Engineer was asked 2mo ago
Q. Which conductor is used in transmission lines?
Ans. 

Transmission lines typically use aluminum or copper conductors for efficient electricity transfer over long distances.

  • Aluminum conductors are lightweight and have good conductivity, making them ideal for overhead transmission lines.

  • Copper conductors offer higher conductivity than aluminum but are heavier and more expensive.

  • ACSR (Aluminum Conductor Steel Reinforced) combines aluminum and steel for strength and cond...

View all Electrical Engineer interview questions
An Electrical Engineer was asked 2mo ago
Q. Explain the working principle of transformers.
Ans. 

Transformers operate on electromagnetic induction to transfer electrical energy between circuits at different voltage levels.

  • Transformers consist of two coils: primary and secondary.

  • They work on the principle of Faraday's law of electromagnetic induction.

  • When alternating current flows through the primary coil, it creates a magnetic field.

  • This magnetic field induces a voltage in the secondary coil.

  • Transformers can ...

View all Electrical Engineer interview questions
A Maintenance Supervisor was asked 2mo ago
Q. What is 5S?
Ans. 

5S is a workplace organization method that improves efficiency and safety through five key steps.

  • Sort: Remove unnecessary items from the workspace. Example: Discard old tools that are no longer used.

  • Set in order: Organize tools and materials for easy access. Example: Label storage areas for quick identification.

  • Shine: Clean the workspace regularly to maintain a tidy environment. Example: Schedule weekly deep clean...

View all Maintenance Supervisor interview questions

What people are saying about ArcelorMittal Nippon Steel

View All
favouritecheeku
Verified Icon
1w
works at
Owens Corning
Steel Plant Job Hunt: CGL Engineer Seeking Opportunities!
Looking for vacancies or referrals in a Steel Plant, specifically in the Continuous Galvanizing Line. I have 4 years of experience at Amns Steel in CGL, NGL & SGL within the Production Dept. Targeting roles like Senior Shift Engineer/ Incharge/Assistant Manager. Any leads or contacts would be greatly appreciated! Thanks!
Got a question about ArcelorMittal Nippon Steel?
Ask anonymously on communities.
A Maintenance Supervisor was asked 2mo ago
Q. What is earth leakage?
Ans. 

Earth leakage refers to the unintended flow of electrical current to the ground, posing safety risks and equipment damage.

  • Occurs when insulation fails, allowing current to escape to the earth.

  • Can lead to electric shocks, fires, or equipment malfunction.

  • Commonly detected using earth leakage circuit breakers (ELCBs).

  • Example: A faulty appliance causing current to leak into the ground.

  • Regular maintenance and testing c...

View all Maintenance Supervisor interview questions
A Maintenance Electrician was asked 3mo ago
Q. How do you work with AC motors?
Ans. 

AC motors convert electrical energy into mechanical energy using alternating current, enabling various industrial applications.

  • AC motors operate on the principle of electromagnetic induction.

  • They consist of a stator (stationary part) and a rotor (rotating part).

  • The stator generates a rotating magnetic field when AC voltage is applied.

  • The rotor, placed within the magnetic field, experiences torque and starts to rot...

View all Maintenance Electrician interview questions
A Maintenance Electrician was asked 3mo ago
Q. How do you work with a DOL starter?
Ans. 

A Direct-On-Line (DOL) starter is used to start and stop electric motors by connecting them directly to the power supply.

  • DOL starters are simple and cost-effective for small motors, typically up to 5-10 HP.

  • They consist of a contactor, overload relay, and start/stop push buttons.

  • When the start button is pressed, the contactor closes, allowing current to flow to the motor.

  • The overload relay protects the motor from o...

View all Maintenance Electrician interview questions
Are these interview questions helpful?
A Site Engineer was asked 3mo ago
Q. How much experience do you have?
Ans. 

I have over 5 years of experience as a site engineer, managing various construction projects from inception to completion.

  • Managed a team of 10 on a commercial building project, ensuring timely completion and adherence to safety standards.

  • Coordinated with architects and contractors to resolve design discrepancies during a residential project.

  • Implemented quality control measures that reduced rework by 15% on a highw...

View all Site Engineer interview questions
A Site Engineer was asked 3mo ago
Q. Why do you want to join our company?
Ans. 

I am drawn to your company for its innovative projects, commitment to quality, and opportunities for professional growth in engineering.

  • Your company has a strong reputation for delivering high-quality infrastructure projects, which aligns with my professional values.

  • I admire your commitment to sustainability and innovative construction techniques, as seen in your recent green building projects.

  • The opportunity for ...

View all Site Engineer interview questions
An Electrical Maintenance Engineer was asked 3mo ago
Q. What is a multimeter?
Ans. 

A multimeter is an electronic measuring instrument for voltage, current, and resistance.

  • Measures voltage (V) in AC and DC circuits.

  • Measures current (A) in both AC and DC.

  • Measures resistance (Ω) to check for continuity.

  • Can test diodes and transistors.

  • Digital multimeters provide precise readings and often include additional features like data logging.

View all Electrical Maintenance Engineer interview questions

ArcelorMittal Nippon Steel Interview Experiences

247 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2023. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. What is your responsibility
  • Ans. 

    As a Production Shift Incharge, my responsibility is to oversee the production process, manage the shift team, ensure quality control, and meet production targets.

    • Oversee the production process to ensure smooth operations

    • Manage the shift team by assigning tasks and providing guidance

    • Ensure quality control measures are followed to maintain product standards

    • Meet production targets by monitoring progress and addressing an...

  • Answered by AI
  • Q2. How to make sure safety standards, sop , 5s,kaizen
  • Ans. 

    To ensure safety standards, SOP, 5S, and Kaizen, regular training, audits, continuous improvement, and employee involvement are key.

    • Regular training sessions on safety standards, SOP, 5S, and Kaizen for all employees

    • Conduct regular audits to ensure compliance with safety standards and SOP

    • Implement 5S methodology to maintain a clean and organized workplace

    • Encourage employee involvement in identifying areas for improveme...

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Difference between shearing and cutting, various sheet metal process , manpower handling, audit knowledge, SAP , MS office knowledge .
  • Ans. 

    Shearing involves cutting sheet metal without forming chips, while cutting involves removing material to separate into pieces.

    • Shearing is a process where a sheet metal is cut without forming chips, while cutting involves removing material to separate into pieces.

    • Various sheet metal processes include bending, punching, stamping, and welding.

    • Manpower handling involves managing and coordinating workers to ensure efficient...

  • Answered by AI
  • Q2. Shearing strength vs yield strength Defect in steel Projects ??? Achievements ???
  • Ans. 

    Shearing strength is the maximum shear stress a material can withstand before failure, while yield strength is the stress at which a material begins to deform plastically.

    • Shearing strength is important in applications involving cutting or punching of materials.

    • Yield strength is crucial in determining the maximum load a material can support without permanent deformation.

    • Defects in steel can include impurities, cracks, o...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Why we hire you ?? Why should you wants to join us ?? Notice period?? What is your expected salary?? Why ??
  • Q2. Have you any questions for asking??
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. Mechanical testing
  • Q2. Like Api audit , NABL audit , ISO and safety
  • Q3. Quality manual,Quality objective, histogram,sop
  • Q4. Standards and specification
  • Q5. Internal audit,capa,moc,policy,

Interview Preparation Tips

Interview preparation tips for other job seekers - Job Responsibilities • Preparation update & Maintaining documentation as per ISO 9001:2015 quality management’s system requirements. Engaged in preparing the quality assurance plan, manufacturing procedure specification (MPs) as per the customer specification & reviewing of process chart for every work order released in shop floor. • Involved in preparation of system documents like Quality Manual, Quality system procedure, Control future for all Department documents. • Prepare all standard operating procedures of each working station as per API & ISO and maintaining same in one location in system to seen to every plant user. • Coordination for all the internal audit and external audit as per schedule with auditor and maintain all documents. • Analyzing the customer complaints by root cause analysis, corrective actions, preventive actions (preparation & implementation). • Follow up and comply of corrective action taken by the individual departments in case of any NCR issued during the audit. • Conducting plant surveillance audits during order execution.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Dec 2024. There were 3 interview rounds.

Round 1 - HR 

(5 Questions)

  • Q1. Can you provide details about your work experience?
  • Ans. 

    I have over 5 years of experience in management roles, leading teams and overseeing operations.

    • Managed a team of 15 employees in a retail store, achieving sales targets consistently

    • Implemented new procedures to streamline operations and improve efficiency

    • Led training sessions for new employees to ensure they were equipped with necessary skills

    • Collaborated with other departments to coordinate projects and meet deadlines

  • Answered by AI
  • Q2. What are the details of your education?
  • Ans. 

    I have a Bachelor's degree in Business Administration from XYZ University.

    • Bachelor's degree in Business Administration

    • Graduated from XYZ University

    • Specialized in Marketing

    • Completed internship at ABC Company

  • Answered by AI
  • Q3. What is your current company and location, and why are you considering leaving your current company?
  • Ans. 

    I am currently working at XYZ Company in Location A. I am considering leaving because I am seeking new challenges and growth opportunities.

    • Currently working at XYZ Company in Location A

    • Seeking new challenges and growth opportunities

    • Interested in taking on more responsibilities as a Deputy Manager

  • Answered by AI
  • Q4. Are you willing to work on projects?
  • Ans. 

    Yes, I am willing to work on projects and have experience managing and leading project teams.

    • I have experience managing and leading project teams

    • I am comfortable working on multiple projects simultaneously

    • I am proactive in identifying and resolving project issues

  • Answered by AI
  • Q5. What is your expected salary?
  • Ans. 

    My expected salary is negotiable and based on the responsibilities and benefits offered in the role.

    • My expected salary is based on my experience, qualifications, and the market rate for the position.

    • I am open to discussing salary expectations during the interview process.

    • I am looking for a competitive salary that reflects my skills and contributions to the organization.

  • Answered by AI
Round 2 - Technical 

(9 Questions)

  • Q1. Tell me about yourself.
  • Ans. 

    I am a dedicated and experienced professional with a strong background in leadership and team management.

    • Over 5 years of experience in management roles

    • Proven track record of successfully leading teams to achieve goals

    • Strong communication and interpersonal skills

    • Ability to problem-solve and make strategic decisions

    • Bachelor's degree in Business Administration

  • Answered by AI
  • Q2. What is your role in your current company?
  • Ans. 

    I am responsible for overseeing daily operations, managing staff, and ensuring targets are met.

    • Overseeing daily operations

    • Managing staff

    • Ensuring targets are met

  • Answered by AI
  • Q3. What activities are you handling, and what is the size of your team? How many individuals are working under your supervision?
  • Ans. 

    I am currently handling various activities related to project management and leading a team of 10 individuals.

    • Handling project planning, execution, and monitoring

    • Leading team meetings and delegating tasks

    • Providing guidance and support to team members

    • Managing team performance and ensuring project deadlines are met

  • Answered by AI
  • Q4. Questions regarding Structural fabrication and erection
  • Q5. What are the different types of projects you have completed, and what challenges have you faced during their execution?
  • Ans. 

    I have completed a variety of projects including software development, process improvement, and team training.

    • Software development project for implementing a new CRM system

    • Process improvement project to streamline inventory management

    • Team training project to enhance communication and collaboration skills

    • Challenges faced include tight deadlines, budget constraints, and resistance to change

  • Answered by AI
  • Q6. Safety related questions
  • Q7. Questions about Pumps, blowers ,conveyors & Bag Filters Piping etc
  • Q8. What are your favorite subjects among engineering disciplines? Questions regarding that.
  • Q9. Some general questions
Round 3 - HR 

(3 Questions)

  • Q1. What is the expected joining date for the position? & notice period
  • Ans. 

    The expected joining date for the position is dependent on the notice period of the candidate.

    • The expected joining date will be determined based on the candidate's notice period.

    • The candidate may need to serve a notice period at their current job before joining the new position.

    • It is important to discuss the notice period during the interview process to ensure a smooth transition.

  • Answered by AI
  • Q2. What is your strengths & Weakness.
  • Ans. 

    My strengths include strong leadership skills and attention to detail. My weakness is that I can be overly critical of myself.

    • Strengths: strong leadership skills

    • Strengths: attention to detail

    • Weakness: overly critical of myself

  • Answered by AI
  • Q3. What is your expected CTC.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected
Round 1 - Technical 

(3 Questions)

  • Q1. Job-based questions relevant to your current role.
  • Q2. What safety components are involved in job execution.
  • Ans. 

    Safety components in job execution ensure a secure work environment, minimizing risks and protecting personnel and assets.

    • Personal Protective Equipment (PPE): Helmets, gloves, and goggles to protect workers from physical hazards.

    • Safety Training: Regular training sessions to educate employees on safety protocols and emergency procedures.

    • Risk Assessment: Identifying potential hazards before starting a job to implement ne...

  • Answered by AI
  • Q3. SOP,HIRA
Round 2 - HR 

(1 Question)

  • Q1. Documents Submition
Round 3 - HR 

(1 Question)

  • Q1. Salary Negotiation

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident throughout the interview.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Company Website and was interviewed in Sep 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Gear box replacement work

Round 2 - HR 

(6 Questions)

  • Q1. Barring checking and saving work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old barring slue remove and new barring slue replace and bolt nut tighteni...
  • Ans. 

    Bolt nut open and old barring slue remove and new barring slue replace and bolt nut tightening sure and paper work cancelled and conveyor belt running ok

  • Answered by arbindkumarsingh
  • Q2. Motor replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and dayal guage ...
  • Ans. 

    Bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and dayal guage eliminate process ok and paper work cancelled and conveyor belt running ok

  • Answered by arbindkumarsingh
  • Q3. Gear box replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old gear box remove and new gear box replace and bolt nut tightening sure and day...
  • Ans. 

    Bolt nut open and old gear box remove and new gear box replace and bolt nut tightening sure and dayal guage eliminate process ok and paper work cancelled and conveyor belt running ok

  • Answered by arbindkumarsingh
  • Q4. Conveyor belt discharge chute replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old discharge chute remove and new discharge chute replace a...
  • Q5. Conveyor belt all pully checking and saving greasing work and safety first and paper work and walked away clean and fresh and all pully checking and saving greasing gun and all' pully greasing and paper wo...
  • Q6. Conveyor belt roller replacement work and safety first and paper work and walked away clean and fresh and try out and fream number mark and cut roller remove and new roller replace and cut roller shifting ...

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the growth of opportunity and advancement

Interview Questions & Answers

user image Anonymous

posted on 4 Jan 2025

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Dec 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. ID fan and P A fan BF pump alignment work
  • Ans. 

    Alignment work for ID fan, PA fan, and BF pump in a power plant.

    • Alignment work involves ensuring the equipment is properly positioned and connected to prevent issues like vibration or misalignment.

    • Proper alignment can improve efficiency and reduce maintenance costs.

    • Examples of alignment work include using laser alignment tools, checking for parallelism, and adjusting mounting bolts.

    • Regular alignment checks should be co...

  • Answered by AI
  • Q2. Pump and gearbox values dismantled and assembling work
  • Ans. 

    Dismantling and assembling pump and gearbox values involves careful disassembly, inspection, cleaning, replacement of parts if necessary, and reassembly.

    • Carefully disassemble the pump and gearbox to access the valves

    • Inspect the valves for any damage or wear

    • Clean the valves thoroughly to remove any debris or buildup

    • Replace any damaged or worn valves with new ones

    • Reassemble the pump and gearbox ensuring all valves are pr...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Company Website and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Gear box replacement work

Round 2 - HR 

(6 Questions)

  • Q1. Motor replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and paper work c...
  • Q2. Discharge chute replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old discharge chute remove and new discharge chute replace and bolt nut ti...
  • Q3. Conveyor belt roller replacement work and safety first and paper work and walked away clean and fresh and try out and fream number mark and cut roller remove and shifting and walked away clean and fresh an...
  • Q4. Conveyor belt all pully greasing and saving work and safety first and paper work and walked away clean and fresh and all pully checking and saving greasing gun and all' pully greasing done and paper work c...
  • Q5. Barring checking and saving work and safety first and paper work and walked away clean and fresh and try out blumber block top cover open and old slue barring remove and new slue barring replace and bolt n...
  • Q6. Gear Box replacement wor and paper work Safety first and try out and bolt nut open and old gear box remove and new gear box replace and bolt nut tightening Sure and dayal guage eliminate process ok and p...

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the growth of opportunity and advancement
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

It was easy and time based

Round 2 - One-on-one 

(2 Questions)

  • Q1. Intro was asked and then steel making process. Software’s u known and about my internship in PORT.
  • Q2. Asked about stress strain curve to explain. And interviewer was very friendly. Very easy to get into this company

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident and read about company what it does and ur good to go.

Assistant Manager Interview Questions & Answers

user image Jitendra Meena

posted on 4 Dec 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. If hydraulic system tank oil is heating, what points will you check?
  • Ans. 

    Check various factors like fluid levels, pump performance, and environmental conditions to diagnose heating in hydraulic systems.

    • Check the oil level in the tank; low levels can lead to overheating due to insufficient lubrication.

    • Inspect the hydraulic pump for wear or malfunction; a failing pump can generate excess heat.

    • Examine the oil quality; contaminated or degraded oil can lose its cooling properties.

    • Evaluate the co...

  • Answered by AI
  • Q2. What is the difference between proportional valve and servo valve
  • Ans. 

    Proportional valves control flow based on input signals, while servo valves provide precise control of position and speed.

    • Proportional valves adjust flow rate based on an electrical signal, suitable for applications like hydraulic systems.

    • Servo valves offer high precision and fast response, often used in robotics and aerospace for accurate motion control.

    • Proportional valves are simpler and less expensive, while servo v...

  • Answered by AI
  • Q3. Have you done any project, what is your involvement?
  • Ans. 

    I led a team project to streamline our inventory management system, improving efficiency and reducing costs significantly.

    • Conducted a thorough analysis of the existing inventory processes to identify bottlenecks.

    • Collaborated with cross-functional teams to gather requirements and ensure alignment.

    • Implemented a new software solution that automated key tasks, reducing manual errors.

    • Trained staff on the new system, resulti...

  • Answered by AI
  • Q4. For BUR choke lubrication which system you're using and what is system interlock?
  • Ans. 

    BUR choke lubrication typically uses a centralized lubrication system with interlocks for safety and efficiency.

    • Centralized lubrication systems ensure consistent oil distribution to BUR chokes.

    • Interlocks prevent operation if lubrication is inadequate, ensuring equipment safety.

    • Example: A pressure switch that halts choke operation if lubrication pressure drops.

    • Regular maintenance checks are essential to ensure the inter...

  • Answered by AI
  • Q5. In your 10 yr experience at JSW Steel, what is the biggest breakdown in your tenure? explain the route couse with CAPA.
  • Ans. 

    During my tenure at JSW Steel, the biggest breakdown was a major equipment failure that halted production for several days.

    • The breakdown occurred in the blast furnace due to a failure in the cooling system.

    • Root cause analysis revealed that the cooling system's maintenance schedule was not adhered to.

    • We implemented a corrective action plan (CAPA) that included revising the maintenance schedule and conducting regular aud...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for ArcelorMittal Nippon Steel Assistant Manager interview:
  • Nothing
Interview preparation tips for other job seekers - Interview preparation is nothing but you should know your role where you're working and explain your role to interviewer properly.

SAP SD Consultant Interview Questions & Answers

user image Kundan Borole

posted on 27 Nov 2024

Interview experience
4
Good
Difficulty level
Easy
Process Duration
-
Result
No response

I applied via Naukri.com and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is E invoicing?
  • Ans. 

    E invoicing is the process of electronically sending and receiving invoices between businesses.

    • Eliminates paper-based invoices

    • Reduces errors and processing time

    • Improves efficiency and cost savings

    • Complies with legal requirements and regulations

    • Examples: sending invoices via email or using electronic data interchange (EDI)

  • Answered by AI
  • Q2. What is TDS/TCS?
  • Ans. 

    TDS/TCS stands for Tax Deducted at Source/Tax Collected at Source, which are types of income tax collected by the government.

    • TDS is deducted by the payer at the time of making payment to the payee and deposited with the government.

    • TCS is collected by the seller from the buyer at the time of sale of specified goods and deposited with the government.

    • TDS/TCS rates vary based on the type of transaction and nature of income...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Easy interview process. If you are confident with Basic to moderate questions.

OJT Interview Questions & Answers

user image Anonymous

posted on 19 Dec 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - Technical 

(7 Questions)

  • Q1. Thermodynamics law's
  • Ans. 

    Thermodynamics laws govern energy transfer and transformation in physical systems.

    • First law of thermodynamics states that energy cannot be created or destroyed, only transferred or converted.

    • Second law of thermodynamics states that the entropy of an isolated system always increases over time.

    • Third law of thermodynamics states that as temperature approaches absolute zero, the entropy of a system approaches a minimum val...

  • Answered by AI
  • Q2. Automobile question
  • Q3. What is your current job profile?
  • Ans. 

    I am currently working as a Marketing Coordinator at a digital marketing agency.

    • Creating and implementing marketing strategies

    • Managing social media accounts

    • Analyzing campaign performance

    • Collaborating with clients and team members

  • Answered by AI
  • Q4. About your family
  • Q5. Full Diploma subjects
  • Q6. What is the process of steelmaking?
  • Ans. 

    Steelmaking is the process of producing steel from iron ore and/or scrap metal through various methods such as blast furnaces or electric arc furnaces.

    • Iron ore is first mined and then processed to remove impurities.

    • The purified iron ore is then combined with coal and limestone in a blast furnace to create molten iron.

    • The molten iron is further processed to remove impurities and adjust the carbon content to create steel...

  • Answered by AI
  • Q7. And many questions regarding material

Interview Preparation Tips

Interview preparation tips for other job seekers - Be fully prepared before the interview.

ArcelorMittal Nippon Steel Interview FAQs

How many rounds are there in ArcelorMittal Nippon Steel interview?
ArcelorMittal Nippon Steel interview process usually has 2-3 rounds. The most common rounds in the ArcelorMittal Nippon Steel interview process are Technical, Resume Shortlist and HR.
How to prepare for ArcelorMittal Nippon Steel interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at ArcelorMittal Nippon Steel. The most common topics and skills that interviewers at ArcelorMittal Nippon Steel expect are Teaching, Direct Tax, Income Tax, Financial Modelling and SAP.
What are the top questions asked in ArcelorMittal Nippon Steel interview?

Some of the top questions asked at the ArcelorMittal Nippon Steel interview -

  1. Production, Maintenance, Quality and Safety. Out of four, tell me the most impo...read more
  2. What is the difference between thermal power plant and hydro power pl...read more
  3. What are the major problems in any production plant? and how can you handle tha...read more
What are the most common questions asked in ArcelorMittal Nippon Steel HR round?

The most common HR questions asked in ArcelorMittal Nippon Steel interview are -

  1. What are your salary expectatio...read more
  2. Share details of your previous j...read more
  3. What are your strengths and weakness...read more
How long is the ArcelorMittal Nippon Steel interview process?

The duration of ArcelorMittal Nippon Steel interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Overall Interview Experience Rating

4.3/5

based on 287 interview experiences

Difficulty level

Easy 26%
Moderate 61%
Hard 13%

Duration

Less than 2 weeks 55%
2-4 weeks 22%
4-6 weeks 11%
6-8 weeks 7%
More than 8 weeks 5%
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.0
 • 917 Interviews
JSW Steel Interview Questions
3.9
 • 664 Interviews
Jindal Stainless Interview Questions
4.1
 • 237 Interviews
Jindal Saw Interview Questions
4.0
 • 121 Interviews
JSW Group Interview Questions
3.9
 • 114 Interviews
Viraj Profiles Interview Questions
3.8
 • 85 Interviews
View all

ArcelorMittal Nippon Steel Reviews and Ratings

based on 2.9k reviews

4.1/5

Rating in categories

3.9

Skill development

3.9

Work-life balance

3.7

Salary

4.0

Job security

3.8

Company culture

3.5

Promotions

3.8

Work satisfaction

Explore 2.9k Reviews and Ratings
Supply chain Management

Bahadurgarh

2-7 Yrs

Not Disclosed

Technical Services

Nazira,

Surat

3-6 Yrs

Not Disclosed

Lead Internal Audit

Visakhapatnam

6-9 Yrs

Not Disclosed

Explore more jobs
Deputy Manager
792 salaries
unlock blur

₹4.7 L/yr - ₹16.2 L/yr

Assistant Manager
628 salaries
unlock blur

₹3 L/yr - ₹12.1 L/yr

Manager
583 salaries
unlock blur

₹6.1 L/yr - ₹23 L/yr

Assistant Field Engineer
449 salaries
unlock blur

₹1.9 L/yr - ₹5 L/yr

Engineer
342 salaries
unlock blur

₹2.6 L/yr - ₹7.6 L/yr

Explore more salaries
Compare ArcelorMittal Nippon Steel with

Tata Steel

4.0
Compare

JSW Steel

3.9
Compare

Jindal Steel and Power

3.9
Compare

Jindal Stainless

4.1
Compare
write
Share an Interview