Filter interviews by
I applied via Company Website and was interviewed in May 2024. There was 1 interview round.
Current value refers to the amount of electric current flowing through a circuit at a specific point in time.
Current value is measured in amperes (A)
It indicates the rate of flow of electric charge
Higher current values can indicate potential hazards such as overloading
Current value can be calculated using Ohm's Law: I = V/R, where I is the current, V is the voltage, and R is the resistance
Star delta control diagram is a method of starting three-phase motors.
Used to reduce the starting current of the motor
Involves connecting the motor windings in a star configuration during starting
After a certain time, the windings are switched to a delta configuration for normal operation
Commonly used in industrial applications
Helps to prolong the life of the motor
PLC stands for Programmable Logic Controller, a digital computer used for automation of electromechanical processes.
PLC is used in industrial automation to control machinery and processes.
It is programmed using ladder logic or other programming languages.
PLC can monitor inputs and outputs, and make decisions based on programmed logic.
Examples of PLC applications include manufacturing, transportation, and energy managem...
Star delta starter is used to reduce starting current and protect the motor.
Reduces starting current by starting the motor in star configuration and then switching to delta configuration
Protects the motor from damage due to high starting current
Used for motors with high starting current, such as those with high horsepower or low starting resistance
Commonly used in industrial applications, such as pumps, compressors, an
There are many types of sensors used in electrical work.
There are temperature sensors, motion sensors, light sensors, and pressure sensors.
Other types of sensors include humidity sensors, gas sensors, and proximity sensors.
Sensors can be used to detect changes in the environment and trigger actions or alarms.
Different sensors have different applications and are used in various industries.
As an electrician, it is import...
VFD stands for Variable Frequency Drive. It is used to control the speed of an electric motor.
VFD is an electronic device that controls the frequency and voltage supplied to an electric motor.
It is used to vary the speed of the motor, which can help save energy and reduce wear and tear on the motor.
VFDs are commonly used in HVAC systems, pumps, and other industrial applications.
They can also be used to control the spee...
The current required by a 6.1hp motor depends on the voltage it operates on.
The current required by the motor can be calculated using the formula: Current (A) = Power (W) / Voltage (V)
Assuming the motor operates on 220V, the current required would be around 27.7A
However, if the motor operates on a different voltage, the current required would be different
Factors like the motor's efficiency and power factor can also aff
An air compressor is a machine that compresses air and stores it in a tank for later use.
Check the oil level and drain the water from the tank before starting
Connect the air hose to the compressor and the tool you want to use
Turn on the compressor and wait for the tank to fill with compressed air
Adjust the pressure regulator to the desired level
Use the tool and turn off the compressor when finished
Regularly maintain th...
A multimeter is a tool used to measure electrical properties such as voltage, current, and resistance.
Multimeters have different settings for measuring different properties
To measure voltage, the multimeter is connected in parallel to the circuit
To measure current, the multimeter is connected in series to the circuit
To measure resistance, the multimeter is connected to the circuit and the resistance value is displayed
M...
Increasing production can be achieved by optimizing processes, improving efficiency, and investing in technology.
Optimize production processes to eliminate bottlenecks and inefficiencies
Invest in training and development of employees to improve skills and productivity
Implement automation and technology to streamline operations and increase output
Regularly review and analyze production data to identify areas for improve...
Qulity of product and stop defected prouducts on loading
Test solved on mobile in 4 sections mathematics general knowledge view techniques
I applied via Recruitment Consultant and was interviewed in Sep 2021. There was 1 interview round.
D.O.L starter stands for Direct-On-Line starter.
D.O.L starter is a type of motor starter used in electrical systems.
It is commonly used to start induction motors.
The full form of D.O.L is Direct-On-Line.
It is also known as a full voltage starter.
In a D.O.L starter, the motor is directly connected to the power supply without any intermediate devices.
It provides a simple and cost-effective method of motor starting.
D.O.L ...
Power factor is a measure of how effectively electrical power is being used in a circuit.
Power factor is the ratio of real power (in watts) to apparent power (in volt-amperes).
It indicates the efficiency of electrical power consumption in a circuit.
A power factor of 1 means all the power is being used effectively, while a power factor less than 1 indicates wastage of power.
Inductive loads like motors and transformers h...
A sensor is a device that detects and responds to physical input from the environment.
Sensors are used to measure and monitor various physical quantities such as temperature, pressure, light, and motion.
They convert the physical input into an electrical signal that can be processed and analyzed.
Examples of sensors include thermocouples, photodiodes, accelerometers, and proximity sensors.
Sensors are essential in many in...
posted on 20 Dec 2022
I applied via Company Website and was interviewed before Dec 2021. There were 2 interview rounds.
Yes, I am familiar with both SAP and Excel.
I have experience using SAP for inventory management and financial reporting.
I am proficient in Excel for data analysis and reporting.
I have used Excel to create pivot tables, charts, and graphs for presentations.
I have also used SAP and Excel together to extract and analyze data for business insights.
I have knowledge of multiple modules in SAP including MM, SD, FI, and CO.
I have experience in Material Management (MM) module which deals with procurement and inventory management.
I also have knowledge of Sales and Distribution (SD) module which deals with sales and order processing.
I am familiar with Financial Accounting (FI) and Controlling (CO) modules which deal with financial management and reporting.
I have worked...
I applied via Naukri.com and was interviewed in Jun 2023. There were 3 interview rounds.
based on 2 interviews
Interview experience
based on 4 reviews
Rating in categories
Territory Sales Incharge
295
salaries
| ₹0 L/yr - ₹0 L/yr |
Area Sales Manager
183
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Territory Sales Incharge
175
salaries
| ₹0 L/yr - ₹0 L/yr |
Account Assistant
108
salaries
| ₹0 L/yr - ₹0 L/yr |
Branch Manager
103
salaries
| ₹0 L/yr - ₹0 L/yr |
Mother Dairy Fruit & Vegetable
Nestle
Britannia
Parle Products