Filter interviews by
I applied via Company Website and was interviewed in Aug 2021. There was 1 interview round.
Capacitors are electronic components that store electrical energy in an electric field.
Capacitors are used in electronic circuits to filter, smooth, and regulate voltage.
They are also used in timing circuits, oscillators, and power factor correction circuits.
Examples of capacitors include ceramic, electrolytic, tantalum, and film capacitors.
Capacitance is measured in farads (F), with smaller values measured in microfar
MFD stands for Manufacturing Date Code.
MFD is a code that indicates the date of manufacture of a product.
It is usually found on the packaging or label of the product.
The format of the code varies depending on the manufacturer.
MFD is important for quality control and tracking of products.
For example, if a product has a defect, the MFD can help identify the batch of products that may be affected.
Microfarad is a unit of capacitance used to measure the amount of electrical charge stored in a capacitor.
It is equal to one millionth of a farad
It is commonly used in electronic circuits to measure capacitance
Capacitors with higher microfarad values can store more charge
Example: A capacitor with a value of 10 microfarads can store 10 millionth of a farad of charge
posted on 22 Apr 2021
I applied via Naukri.com and was interviewed in Oct 2020. There were 4 interview rounds.
posted on 23 May 2021
Quality tools are techniques used to ensure quality in a product or service.
Quality control charts
Pareto charts
Fishbone diagrams
Histograms
Control charts
Scatter diagrams
Statistical process control
A histogram is used to represent the distribution of numerical data. Frequency is the number of occurrences and interval is the range of values.
Histograms are useful for visualizing data and identifying patterns.
Frequency refers to the number of times a value appears in the data set.
Interval refers to the range of values that are grouped together in the histogram.
Histograms are commonly used in statistics, finance, and...
Rework of produced parts affects the factors of Overall Equipment Efficiency (OEE).
Rework increases the time required to produce a part, reducing the availability factor of OEE.
Rework increases the number of defects, reducing the quality factor of OEE.
Rework increases the amount of scrap or waste, reducing the performance factor of OEE.
Rework can lead to increased downtime for equipment setup and adjustments, reducing ...
Autonomous maintenance is a maintenance approach where operators take responsibility for routine maintenance tasks.
Operators are trained to perform routine maintenance tasks
Operators conduct inspections and minor repairs
Autonomous maintenance reduces downtime and improves equipment reliability
It also frees up maintenance staff to focus on more complex tasks
Companies are going for TPM to improve productivity, reduce downtime, and increase efficiency.
TPM helps in identifying and eliminating equipment failures before they occur
It ensures that equipment is maintained properly and in a timely manner
TPM also helps in reducing the need for emergency repairs and downtime
It improves overall equipment effectiveness and reduces costs
Companies that have implemented TPM have seen sig...
SPC stands for Statistical Process Control. Cp and Cpk are statistical tools used to measure process capability.
SPC is a method of monitoring and controlling a process to ensure it is operating within acceptable limits.
Cp is a measure of how well the process is centered between the upper and lower specification limits.
Cpk is a measure of how well the process is capable of producing within the specification limits.
Cp an...
OEE can be calculated by multiplying Availability, Performance, and Quality percentages.
Calculate Availability by dividing Operating Time by Planned Production Time.
Calculate Performance by dividing Actual Production by Maximum Production.
Calculate Quality by dividing Good Units by Total Units Produced.
Multiply Availability, Performance, and Quality percentages to get OEE.
Major losses affecting OEE include availability, performance, and quality losses.
Availability losses occur when equipment is not running due to breakdowns, changeovers, or lack of materials.
Performance losses occur when equipment is running below its maximum speed or efficiency.
Quality losses occur when defective products are produced and need to be scrapped or reworked.
Other losses may include startup and shutdown los...
IATF stands for International Automotive Task Force and its current revised name is IATF 16949:2016.
IATF stands for International Automotive Task Force
Its current revised name is IATF 16949:2016
A capacitor is an electronic component that stores electrical energy in an electric field. It is used in various electronic circuits.
Capacitors are used to filter out noise and stabilize voltage in power supplies.
They are used in timing circuits, oscillators, and filters.
Capacitors are also used in audio equipment to filter out unwanted frequencies.
They can be found in electronic devices such as TVs, computers, and sma...
posted on 15 Sep 2021
I applied via Naukri.com and was interviewed in Aug 2021. There was 1 interview round.
posted on 11 Nov 2021
I applied via Campus Placement and was interviewed in Oct 2021. There were 4 interview rounds.
Poka-yoke is a quality control technique used to prevent errors or mistakes in a process.
Poka-yoke is a Japanese term meaning 'mistake-proofing' or 'error-proofing'.
It involves designing a process or system in a way that makes it impossible or difficult to make mistakes.
Poka-yoke techniques can include using sensors, alarms, guides, or physical devices to prevent errors.
Examples of poka-yoke include car ignition system...
The check points given by the customer in the power bank include battery capacity, charging time, safety features, and compatibility.
Battery capacity: Customers may specify the desired capacity of the power bank, such as 10,000mAh or 20,000mAh.
Charging time: Customers may expect the power bank to charge their devices within a specific time frame, like 2 hours or less.
Safety features: Customers may require the power ban...
I applied via Company Website and was interviewed in Jan 2022. There were 3 interview rounds.
Testing is the process of evaluating a system or component to determine if it satisfies specified requirements.
Testing is done to identify defects or errors in software or hardware.
It involves executing a system or component with the intent of finding bugs or verifying its functionality.
Testing can be performed at various levels such as unit testing, integration testing, system testing, and acceptance testing.
Different...
Testing is done to ensure that the software meets the requirements and is of high quality.
To identify defects and errors in the software
To ensure that the software meets the specified requirements
To improve the quality of the software
To increase customer satisfaction
To reduce the risk of software failure
To ensure that the software is reliable and secure
I applied via Referral and was interviewed before Feb 2022. There were 4 interview rounds.
Discussion about Basic Information
I applied via Referral and was interviewed in Nov 2020. There were 4 interview rounds.
Area Sales Manager
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Marketing Executive
4
salaries
| ₹0 L/yr - ₹0 L/yr |
Accountant
3
salaries
| ₹0 L/yr - ₹0 L/yr |
Design & Development Engineer
3
salaries
| ₹0 L/yr - ₹0 L/yr |
Vishay Components
Murata Electronics india
TDK India Private Limited
KEMET