AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
AMIAND CONSULTING MEP Site Engineer Interview Questions, Process, and Tips
AMIAND CONSULTING MEP Site Engineer Interview Experiences
1 interview found
Vipul Singh
Selected
I applied via Approached by Company and was interviewed in Feb 2024. There were 3 interview rounds.
(2 Questions)
- Q1. About your self
- Q2. Previous company work experience
(7 Questions)
- Q1. About MEP Questions
- Q2. Electrical, Plumbing and Firefighting Questions
- Q3. How many types of PVC Pipes
- Ans.
There are mainly two types of PVC pipes: rigid PVC pipes and flexible PVC pipes.
Rigid PVC pipes are used for water supply, drainage, and irrigation systems.
Flexible PVC pipes are used for electrical conduits, cable protection, and ventilation systems.
- Q4. Difference between RCCB & ELCB
- Ans.
RCCB is used to protect against earth faults, while ELCB is used to protect against earth leakage currents.
RCCB stands for Residual Current Circuit Breaker and protects against earth faults by detecting the difference in current flow between live and neutral wires.
ELCB stands for Earth Leakage Circuit Breaker and protects against earth leakage currents by detecting any current leakage to earth.
RCCB is more sensitive an...
- Q5. What is the centre level and top level of WC
- Ans.
Centre level of WC is the level of the waste pipe connection and top level is the finished floor level of the WC.
Centre level of WC is the level at which the waste pipe connection is made.
Top level of WC is the finished floor level of the WC.
Centre level is important for proper installation of plumbing fixtures.
Top level is important for determining the height of the WC and other fixtures in relation to the finished fl
- Q6. About Lighting Arrestor
- Q7. About HVAC Questions
(4 Questions)
- Q1. How much current be in lighting arrestor
- Ans.
The current in a lighting arrestor depends on the specific design and rating of the device.
The current in a lighting arrestor is typically measured in kiloamperes (kA).
The current rating of a lighting arrestor is determined by the manufacturer and should be specified in the product documentation.
The current in a lighting arrestor is designed to safely divert lightning strikes away from the protected equipment or struct...
- Q2. Typing of Electrical Conduits
- Q3. About 3 phase Distribution Board
- Q4. About Transformer Installation
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Selected
I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.
(3 Questions)
- Q1. Mivan formwork process?
- Ans.
Mivan formwork is a construction technique that uses aluminum formwork system for casting concrete structures.
Mivan formwork involves setting up aluminum formwork panels, fixing reinforcement bars, pouring concrete, and removing the formwork after the concrete has set.
It is a fast and efficient construction method commonly used for high-rise buildings and large residential projects.
The system allows for smooth finishes...
- Q2. Finishing process
- Q3. Reinforcement related
MEP Engineer Interview Questions & Answers
China State Construction Engineering Corporation
Anonymous
posted on 21 Mar 2021
I applied via Referral and was interviewed in Sep 2020. There were 5 interview rounds.
Interview Questionnaire
1 Question
- Q1. Introduction ,Expectation ,Able to relocate, Past experience ,Flexibility ,Determined,Long lasting
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Jun 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Some basic questions about Ofc work and personal information
- Q2. Ofc cable blowing how to start
- Ans.
To start OFC cable blowing, follow these steps
Ensure that the ducts are clean and free of any obstruction
Attach the cable blowing machine to the duct
Connect the cable to the machine and start the blowing process
Monitor the cable's progress and adjust the machine's speed as needed
Once the cable has been blown through the entire length of the duct, detach the machine and cable
Interview Preparation Tips
- Nld
- Lm
Just one interview it's enough to get job in bepl
(3 Questions)
- Q1. What is the Density of cement?
- Ans.
The density of cement is around 1440 kg/m³.
The density of cement varies depending on the type of cement.
The density of Portland cement is around 1440 kg/m³.
The density of lightweight cement is around 1000 kg/m³.
The density of high-density cement is around 3000 kg/m³.
- Q2. What is clear cover in column?
- Ans.
Clear cover in column refers to the distance between the surface of the reinforcement and the outer surface of the concrete.
Clear cover is important to protect the reinforcement from corrosion and to ensure proper bonding between the reinforcement and concrete.
The required clear cover for columns depends on factors such as the type of structure, exposure conditions, and size of the reinforcement.
For example, in a coast...
- Q3. What is bending moment formula?
- Ans.
Bending moment formula calculates the internal bending moment in a beam or structure.
Bending moment formula is M = F * d
M is the bending moment, F is the force applied, and d is the distance from the force to the point of interest
Bending moment can be positive or negative depending on the direction of the force and the orientation of the beam
Bending moment is an important factor in designing and analyzing structures
Interview Preparation Tips
- Bis 456
Interview Questionnaire
5 Questions
- Q1. What the thickness of compreg ply and it's size
- Ans.
The thickness of compreg ply varies depending on its intended use and application. Its size can also vary depending on the manufacturer and customer requirements.
The thickness of compreg ply can range from 3mm to 25mm or more
The size of compreg ply can vary from 4ft x 8ft to 5ft x 10ft or more
The thickness and size of compreg ply can be customized based on the specific requirements of the project
Compreg ply is commonly...
- Q2. Maximum reapetation of ply shuttering
- Ans.
The maximum repetition of ply shuttering depends on various factors such as quality of ply, weather conditions, and type of concrete.
The maximum repetition of ply shuttering can range from 5 to 20 times depending on the above factors.
If the quality of ply is good and weather conditions are favorable, the ply shuttering can be reused more number of times.
However, if the concrete mix is harsh or the weather conditions ar...
- Q3. Consumption of shuttering oil per ltr how much area covered
- Ans.
The consumption of shuttering oil per liter depends on the area covered.
The consumption of shuttering oil per liter can vary depending on factors such as the type of shuttering material, surface texture, and weather conditions.
On average, 1 liter of shuttering oil can cover approximately 10-15 square meters of surface area.
However, this can vary significantly based on the absorbency of the surface and the thickness of ...
- Q4. How much elongation % of fe550 steel
- Ans.
The elongation % of fe550 steel varies depending on the specific grade and manufacturing process.
The elongation % of fe550 steel can range from 14% to 20%.
It is important to refer to the specifications provided by the manufacturer for accurate information.
The elongation % indicates the ability of the steel to deform before breaking under tension.
Fe550 steel is commonly used in construction and reinforcement application
- Q5. What the mean of rolling margin of the steel
- Ans.
Rolling margin of steel is the difference between the target thickness and the actual thickness after rolling.
Rolling margin is a measure of the accuracy of the rolling process.
It is calculated by subtracting the actual thickness of the steel after rolling from the target thickness.
A positive rolling margin means the steel is thicker than intended, while a negative rolling margin means it is thinner.
Rolling margin is i...
Interview Preparation Tips
(1 Question)
- Q1. Introduction,goals,Explain your final year project
Interview Preparation Tips
I applied via Walk-in and was interviewed in May 2022. There were 2 interview rounds.
Construction material and techniques
Construction labour management
Site work
Interview Preparation Tips
- Autocad
- REVIT Architecture
Project Engineer Interview Questions & Answers
China State Construction Engineering Corporation
Anonymous
posted on 31 Oct 2023
(5 Questions)
- Q1. Basics civil engineering
- Q2. How is your last project does
- Q3. What is your additional skills
- Q4. What about your addition launguage
- Q5. Where is your home town
Mechanical Engineer Interview Questions & Answers
Scc Infrastructure
Anonymous
posted on 30 Jun 2024
(2 Questions)
- Q1. About experience
- Q2. Salary negotiation
(2 Questions)
- Q1. Batching plant erection and maintenance
- Q2. Vehicle utilisation
Interview Preparation Tips
AMIAND CONSULTING Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Site Engineer Interview Questions
- Civil Site Engineer Interview Questions
- Site Supervisor Interview Questions
- Electrical Site Engineer Interview Questions
- Site Engineer Mechanical Interview Questions
- Senior Site Engineer Interview Questions
- Site Incharge Interview Questions
- Civil Site Supervisor Interview Questions
- Show more
AMIAND CONSULTING MEP Site Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
AMIAND CONSULTING MEP Site Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Project Engineer
28
salaries
|  ₹2.3 L/yr - ₹7.3 L/yr |
|
Horticulturist
9
salaries
| ₹3.8 L/yr - ₹5.5 L/yr |
|
Project Engineer - Civil
8
salaries
| ₹3 L/yr - ₹3 L/yr |
|
Document Controller
5
salaries
| ₹3 L/yr - ₹5.3 L/yr |
|
HR Associate
4
salaries
| ₹4.5 L/yr - ₹5 L/yr |
Lea Associates South Asia
McNally Bharat Engineering
R.V.R. PROJECTS
ABCI Infrastructures
- Home >
- Interviews >
- AMIAND CONSULTING Interview Questions >
- AMIAND CONSULTING MEP Site Engineer Interview Questions
