Amar Udyog Interview Questions, Process, and Tips for Experienced

Q1. 7QC Tools ,GD&T and about the Inprocess Quality
Add your answer

Q1. About the working experience
Add your answer
Q2. How check the Flatness
Ans. 
Flatness can be checked using various methods depending on the surface and equipment available.
• Use a straight edge or surface plate to check for gaps between the surface and the straight edge

• Use a feeler gauge to measure the gap between the surface and the straight edge

• Use a laser or optical flat to measure the flatness of a surface

• Check for any visible warping or distortion in the surface

• Compare the surface to a known...read more
Answered by AI
Add your answer
Q3. How check perpendicularity
Ans. 
Perpendicularity can be checked using various tools and methods.
• Use a square or a right angle to check if the surface is perpendicular to the reference plane.

• Use a dial gauge or a height gauge to measure the deviation from perpendicularity.

• Use a laser alignment tool to check the perpendicularity of a surface or a machine axis.

• Check the perpendicularity of a hole using a cylindrical square or a bore gauge.

• Ensure that th...read more
Answered by AI
Add your answer
Q4. How check parallelism
Ans. 
Parallelism can be checked using various methods.
• Using a dial indicator to measure the distance between two points on the surface being checked

• Using a straight edge or surface plate to check for gaps between the surface being checked and the straight edge

• Using a laser alignment tool to check for parallelism between two surfaces

• Using a coordinate measuring machine (CMM) to measure the surface and compare it to the CAD m...read more
Answered by AI
Add your answer
Q5. How check straightness
Ans. 
Straightness can be checked using various methods such as visual inspection, straight edges, laser alignment tools, and coordinate measuring machines.
• Visual inspection can be done by looking at the object from different angles and checking for any visible bends or curves.

• Straight edges can be used to check the straightness of a surface or edge by placing it against the object and checking for any gaps or light passing ...read more
Answered by AI
Add your answer
Q6. How do layout of machining part.
Ans. 
The layout of a machining part involves determining the optimal arrangement of features and dimensions for efficient and accurate production.
• Consider the size and shape of the part

• Determine the necessary features and dimensions

• Arrange features and dimensions in a logical and efficient manner

• Consider the capabilities of the machining equipment

• Ensure proper tolerances and clearances

• Test and refine the layout as needed
Answered by AI
Add your answer
Q7. How check tapping depth and drill depth
Ans. 
Tapping and drill depth can be checked using depth gauges or depth micrometers.
• Use a depth gauge to measure the depth of a hole or tap by placing the gauge on the surface and lowering the probe into the hole until it touches the bottom.

• For drill depth, use a depth micrometer to measure the distance from the tip of the drill bit to the end of the flutes.

• Ensure the gauge or micrometer is calibrated and zeroed before use.

• ...read more
Answered by AI
Add your answer

Geometrical Dimensioning and Tolerancing