Upload Button Icon Add office photos

Filter interviews by

Amar Udyog Inprocess Quality Engineer Interview Questions, Process, and Tips

Updated 30 Jun 2022

Amar Udyog Inprocess Quality Engineer Interview Experiences

1 interview found

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. 7QC Tools ,GD&T and about the Inprocess Quality
Round 3 - Technical 

(7 Questions)

  • Q1. About the working experience
  • Q2. How check the Flatness
  • Ans. 

    Flatness can be checked using various methods depending on the surface and equipment available.

    • Use a straight edge or surface plate to check for gaps between the surface and the straight edge

    • Use a feeler gauge to measure the gap between the surface and the straight edge

    • Use a laser or optical flat to measure the flatness of a surface

    • Check for any visible warping or distortion in the surface

    • Compare the surface to a known...

  • Answered by AI
  • Q3. How check perpendicularity
  • Ans. 

    Perpendicularity can be checked using various tools and methods.

    • Use a square or a right angle to check if the surface is perpendicular to the reference plane.

    • Use a dial gauge or a height gauge to measure the deviation from perpendicularity.

    • Use a laser alignment tool to check the perpendicularity of a surface or a machine axis.

    • Check the perpendicularity of a hole using a cylindrical square or a bore gauge.

    • Ensure that th...

  • Answered by AI
  • Q4. How check parallelism
  • Ans. 

    Parallelism can be checked using various methods.

    • Using a dial indicator to measure the distance between two points on the surface being checked

    • Using a straight edge or surface plate to check for gaps between the surface being checked and the straight edge

    • Using a laser alignment tool to check for parallelism between two surfaces

    • Using a coordinate measuring machine (CMM) to measure the surface and compare it to the CAD m...

  • Answered by AI
  • Q5. How check straightness
  • Ans. 

    Straightness can be checked using various methods such as visual inspection, straight edges, laser alignment tools, and coordinate measuring machines.

    • Visual inspection can be done by looking at the object from different angles and checking for any visible bends or curves.

    • Straight edges can be used to check the straightness of a surface or edge by placing it against the object and checking for any gaps or light passing ...

  • Answered by AI
  • Q6. How do layout of machining part.
  • Ans. 

    The layout of a machining part involves determining the optimal arrangement of features and dimensions for efficient and accurate production.

    • Consider the size and shape of the part

    • Determine the necessary features and dimensions

    • Arrange features and dimensions in a logical and efficient manner

    • Consider the capabilities of the machining equipment

    • Ensure proper tolerances and clearances

    • Test and refine the layout as needed

  • Answered by AI
  • Q7. How check tapping depth and drill depth
  • Ans. 

    Tapping and drill depth can be checked using depth gauges or depth micrometers.

    • Use a depth gauge to measure the depth of a hole or tap by placing the gauge on the surface and lowering the probe into the hole until it touches the bottom.

    • For drill depth, use a depth micrometer to measure the distance from the tip of the drill bit to the end of the flutes.

    • Ensure the gauge or micrometer is calibrated and zeroed before use.

    • ...

  • Answered by AI
Round 4 - Group Discussion 

Geometrical Dimensioning and Tolerancing

Interview Preparation Tips

Interview preparation tips for other job seekers - In a weak minimum 2 or 3 interview must. Then an employee active a good job.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Can you provide a detailed description of yourself and your professional experience?
  • Ans. 

    Experienced Quality Engineer with a strong background in process improvement and quality assurance.

    • Over 5 years of experience in quality engineering roles

    • Skilled in implementing and maintaining quality management systems

    • Proficient in conducting root cause analysis and implementing corrective actions

    • Certified Six Sigma Black Belt with a track record of improving process efficiency

    • Strong communication and teamwork skills...

  • Answered by AI
  • Q2. What are the roles and responsibilities within your company?
  • Ans. 

    Roles and responsibilities within the company include ensuring quality standards are met, conducting audits, implementing process improvements, and providing technical support.

    • Ensuring quality standards are met through inspections and audits

    • Implementing process improvements to enhance product quality

    • Providing technical support to production teams

    • Collaborating with cross-functional teams to address quality issues

    • Develop...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Duroshox Quality Engineer interview:
  • Technical Skills
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - One-on-one 

(5 Questions)

  • Q1. 7 QC tools explain
  • Ans. 

    The 7 QC tools are a set of basic tools used for quality control and problem-solving in manufacturing and service industries.

    • Check sheet: Used to collect and organize data in a systematic way.

    • Pareto chart: Helps identify the most significant factors contributing to a problem.

    • Cause and effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.

    • Histogram: A graphical representation of d...

  • Answered by AI
  • Q2. Six big losses in quality
  • Ans. 

    The six big losses in quality refer to specific areas where efficiency and productivity can be improved in a manufacturing process.

    • 1. Downtime - time when production is stopped due to issues like equipment breakdowns or changeovers

    • 2. Speed loss - inefficiencies that slow down the production process

    • 3. Defects - products that do not meet quality standards and need to be reworked or scrapped

    • 4. Setup and adjustment - time ...

  • Answered by AI
  • Q3. PPAP explain with demonstration
  • Ans. 

    PPAP stands for Production Part Approval Process, a standardized process in the automotive industry to ensure suppliers meet quality standards.

    • PPAP is a set of documents and procedures used to demonstrate that a supplier can consistently meet customer requirements.

    • It includes documentation such as control plans, process flow diagrams, and inspection records.

    • PPAP is typically required by automotive manufacturers before ...

  • Answered by AI
  • Q4. Clause of iso and iatf
  • Ans. 

    ISO 9001 and IATF 16949 are two important quality management system standards.

    • ISO 9001 focuses on general quality management principles and practices.

    • IATF 16949 is specific to the automotive industry and includes additional requirements.

    • Both standards emphasize the importance of customer satisfaction, continual improvement, and risk-based thinking.

  • Answered by AI
  • Q5. Raw material details you are aware of
  • Ans. 

    I am aware of the raw material details such as supplier information, specifications, quality standards, and testing procedures.

    • Supplier information including contact details and location

    • Raw material specifications such as composition, dimensions, and tolerances

    • Quality standards and certifications required for raw materials

    • Testing procedures for raw materials to ensure quality and compliance

  • Answered by AI
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What are the responsibilities of a quality engineer?
  • Ans. 

    Quality engineers are responsible for ensuring products meet quality standards through testing, analysis, and process improvement.

    • Developing and implementing quality control systems

    • Conducting tests and inspections to identify defects

    • Analyzing data to improve processes and reduce defects

    • Collaborating with production teams to address quality issues

    • Training staff on quality standards and procedures

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Not good
Interview experience
4
Good
Difficulty level
Hard
Process Duration
-
Result
Selected Selected

I applied via Approached by Company and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Basic information 1st level interview only
Round 2 - Group Discussion 

Quality countermeasure precentstion

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Educational details and other persional details
Round 3 - Technical 

(1 Question)

  • Q1. Power supply designing and instrument details

I applied via Naukri.com and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Explain 8D? how to control the issue process
  • Ans. 

    8D is a problem-solving methodology used to identify, correct and prevent recurring problems.

    • D1: Establish the team and define the problem

    • D2: Describe the problem in detail

    • D3: Develop an interim containment action

    • D4: Identify root cause and verify it

    • D5: Choose and verify permanent corrective actions

    • D6: Implement and validate corrective actions

    • D7: Prevent recurrence and recognize the team

    • D8: Celebrate the success and sh

  • Answered by AI
  • Q2. Process improvement on process line explain details
  • Ans. 

    Process improvement on process line involves identifying and implementing changes to enhance efficiency and quality.

    • Analyze current process flow and identify bottlenecks or areas for improvement

    • Implement Lean or Six Sigma methodologies to reduce waste and variability

    • Use statistical process control techniques to monitor and control process performance

    • Collaborate with cross-functional teams to gather input and implement ...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Pricol Engineering Industries Quality Engineer interview:
  • 8D Analysis
  • Standards
Interview preparation tips for other job seekers - It was very good learning from my lnterview. Candidate You will express the thoughts clearly in verbally Although project should be positive manner in all form of communication .
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Job Profile, working
  • Q2. Role and responsibilities

Interview Preparation Tips

Interview preparation tips for other job seekers - Proper knowledge of role and responsibilities

I applied via Company Website and was interviewed in Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 
Round 3 - HR 

(5 Questions)

  • Q1. What are your salary expectations?
  • Q2. Share details of your previous job.
  • Q3. What is your family background?
  • Q4. What are your strengths and weaknesses?
  • Q5. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - I'm Kunal Rawal I'm looking for a job and that was a long time for search a job my profile regarding . so please sir you give a chance it
Thankyou

I applied via Company Website and was interviewed in Feb 2021. There were 4 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. What is 5S?
  • Ans. 

    5S is a workplace organization method that aims to improve efficiency and productivity by eliminating waste and optimizing workflow.

    • Sort - separate necessary items from unnecessary ones

    • Set in order - arrange necessary items in a logical and efficient manner

    • Shine - clean and maintain the workplace

    • Standardize - establish procedures and guidelines for maintaining the 5S system

    • Sustain - continuously improve and maintain th...

  • Answered by AI
  • Q2. What is 7QC Tool ?
  • Ans. 

    7QC Tool is a set of 7 quality control tools used for process improvement and problem-solving.

    • The tools are: Pareto Chart, Cause-and-Effect Diagram, Check Sheet, Control Chart, Histogram, Scatter Diagram, and Flow Chart.

    • They help in identifying and analyzing problems, and finding solutions.

    • For example, a Pareto Chart can be used to identify the most frequent problems in a process, while a Cause-and-Effect Diagram can h...

  • Answered by AI
  • Q3. What is Kizen ?
  • Ans. 

    Kaizen is a Japanese term for continuous improvement.

    • Kaizen involves making small, incremental changes to improve processes and systems.

    • It is a key principle of Lean manufacturing and Six Sigma methodologies.

    • Kaizen encourages employee involvement and empowerment in the improvement process.

    • Examples of Kaizen include reducing waste, improving efficiency, and enhancing quality.

    • Kaizen is a long-term approach to improvement

  • Answered by AI
  • Q4. About yourself.
  • Q5. Previous work related Question.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be in formal and have confidence on yourself.

Amar Udyog Interview FAQs

How many rounds are there in Amar Udyog Inprocess Quality Engineer interview?
Amar Udyog interview process usually has 4 rounds. The most common rounds in the Amar Udyog interview process are Resume Shortlist, One-on-one Round and Technical.
What are the top questions asked in Amar Udyog Inprocess Quality Engineer interview?

Some of the top questions asked at the Amar Udyog Inprocess Quality Engineer interview -

  1. How do layout of machining pa...read more
  2. How check tapping depth and drill de...read more
  3. How check perpendicular...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Maruti Suzuki Interview Questions
4.2
 • 573 Interviews
ITC Interview Questions
4.0
 • 531 Interviews
Tata Group Interview Questions
4.2
 • 357 Interviews
Adani Group Interview Questions
3.9
 • 173 Interviews
Marelli Interview Questions
3.8
 • 34 Interviews
View all

Amar Udyog Inprocess Quality Engineer Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

3.0

Skill development

3.0

Work-Life balance

2.0

Salary & Benefits

2.0

Job Security

3.0

Company culture

3.0

Promotions/Appraisal

3.0

Work Satisfaction

Explore 1 Review and Rating
Assistant Manager
13 salaries
unlock blur

₹4.3 L/yr - ₹8 L/yr

Quality Engineer
8 salaries
unlock blur

₹2.2 L/yr - ₹3.5 L/yr

Engineer
7 salaries
unlock blur

₹2.5 L/yr - ₹3.6 L/yr

Senior Engineer
7 salaries
unlock blur

₹2.8 L/yr - ₹7 L/yr

Junior Engineer
7 salaries
unlock blur

₹2.5 L/yr - ₹4 L/yr

Explore more salaries
Compare Amar Udyog with

Tata Group

4.2
Compare

Reliance Industries

4.0
Compare

Aditya Birla Group

4.1
Compare

Mahindra & Mahindra

4.1
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview