Upload Button Icon Add office photos
Premium Employer

i

This company page is being actively managed by Alfa Laval Team. If you also belong to the team, you can get access from here

Alfa Laval Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Alfa Laval Supplier Development Engineer Interview Questions and Answers

Updated 24 May 2024

Alfa Laval Supplier Development Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Drawing GD and T Drawing Reading Supplier Development Process Castings and forging processes Maching procesess

Interview questions from similar companies

I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Maintenance phylosophy
  • Ans. Depends on equipment running hour, criticality, availability and standby.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Thermax Limited Senior Engineer interview:
  • Boe
  • Energy manager
Interview preparation tips for other job seekers - Be confidential and technically strong.

I applied via Naukri.com and was interviewed before Apr 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About circuit breaker, transformer.
  • Q2. Single line diagrams, layout, substation calculation.

Interview Preparation Tips

Interview preparation tips for other job seekers - Please go through substation calculation and equipment.

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. GD&T QUESTION? Technical question?
  • Q2. GD&T- Geometric dimensioning & Tolerancing

Interview Preparation Tips

Interview preparation tips for other job seekers - Very through with technical knowledge.
Good knowledge of practical.
Confidence will add advantage.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is pressure vessel
  • Ans. 

    A pressure vessel is a container designed to hold gases or liquids at a pressure substantially different from the ambient pressure.

    • Pressure vessels are used in various industries such as oil and gas, chemical, pharmaceutical, and food processing.

    • They are designed to withstand high pressures and are typically cylindrical or spherical in shape.

    • Examples include boilers, storage tanks, and compressed air tanks.

  • Answered by AI
  • Q2. How to design shell
  • Ans. 

    Designing a shell involves considering factors like material, shape, size, and functionality.

    • Consider the material of the shell - metal, plastic, or composite

    • Determine the shape of the shell based on the intended use - cylindrical, spherical, conical, etc.

    • Decide on the size of the shell to accommodate the contents it will hold

    • Design the shell with the necessary functionality in mind - openings, closures, ventilation, e

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Oct 2024. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Write unit testing for adding two nimbers
  • Ans. 

    Unit testing for adding two numbers

    • Create a test case with two numbers and expected sum

    • Call the function that adds two numbers

    • Assert that the result matches the expected sum

  • Answered by AI
Round 2 - Behavioral 

(1 Question)

  • Q1. Explain challenge you faced in your last project
Round 3 - HR 

(1 Question)

  • Q1. Salary expectations

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare on fundamentals and previous projects

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Production piping regarding
  • Q2. Hydro and erection and commissioning.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical questions related to core engg. field.
Round 3 - HR 

(1 Question)

  • Q1. Typical HR related questions such as past company experience, any issues with past employers, work environment & policies of the organization etc...

Interview Preparation Tips

Interview preparation tips for other job seekers - Preparation with regard to past experiences & technical details of your applied job role...

Interview Questionnaire 

6 Questions

  • Q1. Drum level transmitter
  • Q2. Boiler interlocking
  • Q3. Vibration sensors
  • Q4. Turbine parameters and interlocking
  • Q5. DCS tag assigning process
  • Ans. 

    DCS tag assigning process involves assigning unique names to process variables for monitoring and control.

    • DCS tag assigning process is crucial for efficient process control and monitoring.

    • Each tag represents a process variable and is assigned a unique name for easy identification.

    • Tags can be assigned manually or automatically based on the process requirements.

    • Tag naming conventions should be consistent and follow indus...

  • Answered by AI
  • Q6. Smart positioners like Simens Sipart 02

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident don't nervous

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in May 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(6 Questions)

  • Q1. Which are the equipment used in steam turbine? And their principal and working and troubleshooting?
  • Ans. 

    Equipment used in steam turbine include turbine blades, nozzles, casing, rotor, bearings, and governor.

    • Turbine blades: convert steam energy into mechanical energy

    • Nozzles: control the flow of steam into the turbine

    • Casing: contains and directs the steam flow through the turbine

    • Rotor: connected to the turbine blades and rotates to generate power

    • Bearings: support the rotor and reduce friction

    • Governor: regulates the speed o

  • Answered by AI
  • Q2. Tell us about the Woodward 505 ?
  • Ans. 

    Woodward 505 is a versatile control system used in industrial applications.

    • The Woodward 505 is a widely used control system in industries such as power generation, oil and gas, and marine.

    • It offers advanced features like PID control, sequencing, and communication capabilities.

    • The Woodward 505 is known for its reliability and robustness in harsh operating environments.

    • It can be easily integrated with various types of se

  • Answered by AI
  • Q3. Explain the structure of the Honeywell DCS ?
  • Ans. 

    The Honeywell DCS (Distributed Control System) is a modular system consisting of controllers, I/O modules, and operator stations.

    • Consists of controllers, I/O modules, and operator stations

    • Uses a network to communicate between components

    • Allows for centralized control and monitoring of processes

    • Supports various communication protocols such as Modbus, OPC, etc.

    • Example: Honeywell Experion PKS

  • Answered by AI
  • Q4. What is PID and How does it work ?
  • Ans. 

    PID stands for Proportional-Integral-Derivative, a control loop feedback mechanism used in engineering.

    • PID is a control algorithm that calculates an error value as the difference between a desired setpoint and a measured process variable.

    • Proportional (P) control responds to the current error value.

    • Integral (I) control accumulates past errors to correct the present error.

    • Derivative (D) control predicts future errors bas...

  • Answered by AI
  • Q5. How to assign new chennal in Honeywell DCS ?
  • Ans. 

    To assign a new channel in Honeywell DCS, you need to access the configuration software and follow the steps to add the channel.

    • Access the Honeywell DCS configuration software

    • Navigate to the channel configuration section

    • Add a new channel by specifying the channel number, type, and other relevant parameters

    • Save the changes and verify the new channel is successfully assigned

  • Answered by AI
  • Q6. Tell the interlock and permissive of boiler and turbine?
  • Ans. 

    Interlocks and permissives are safety mechanisms in place to prevent unsafe operation of boiler and turbine systems.

    • Interlocks prevent certain actions from taking place unless specific conditions are met

    • Permissives allow certain actions to take place only if specific conditions are met

    • Example of interlock: Boiler feed pump interlock prevents the boiler from starting unless the feed pump is running

    • Example of permissive:...

  • Answered by AI

Skills evaluated in this interview

Contribute & help others!
anonymous
You can choose to be anonymous

Alfa Laval Interview FAQs

How many rounds are there in Alfa Laval Supplier Development Engineer interview?
Alfa Laval interview process usually has 1 rounds. The most common rounds in the Alfa Laval interview process are Technical.

Recently Viewed

INTERVIEWS

Societe Generale Global Solution Centre

No Interviews

INTERVIEWS

HCLTech

No Interviews

INTERVIEWS

Worley

No Interviews

INTERVIEWS

IDFC FIRST Bank

No Interviews

INTERVIEWS

Lokesh Machines

No Interviews

INTERVIEWS

SMS Group

No Interviews

INTERVIEWS

Ksb Pumps

No Interviews

INTERVIEWS

Cholamandalam MS Risk Services

No Interviews

INTERVIEWS

ZS

No Interviews

SALARIES

Cholamandalam MS Risk Services

Tell us how to improve this page.

Alfa Laval Supplier Development Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 418 Interviews
Thermax Limited Interview Questions
4.1
 • 251 Interviews
ABB Interview Questions
4.1
 • 235 Interviews
Cummins Interview Questions
4.3
 • 231 Interviews
John Deere Interview Questions
4.1
 • 229 Interviews
Caterpillar Inc Interview Questions
4.3
 • 176 Interviews
Atlas Copco Interview Questions
4.2
 • 78 Interviews
TechnipFMC Interview Questions
4.0
 • 70 Interviews
View all

Alfa Laval Supplier Development Engineer Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

-

Skill development

-

Work-life balance

-

Salary

-

Job security

-

Company culture

-

Promotions

-

Work satisfaction

Explore 1 Review and Rating
Design Engineer
43 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Process Engineer
36 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Manager
32 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Field Service Engineer
29 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Area Sales Manager
25 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Alfa Laval with

Thermax Limited

4.1
Compare

Kirloskar Brothers

3.8
Compare

Forbes Marshall

4.1
Compare

GEA Group

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview