Upload Button Icon Add office photos

Filter interviews by

AL-SUWAIDI INDUSTRIAL SERVICES Quality Assurance and Quality Control Mechanical Engineer Interview Questions and Answers

Updated 10 Oct 2023

AL-SUWAIDI INDUSTRIAL SERVICES Quality Assurance and Quality Control Mechanical Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. 1.during pipe material inspection is Hydrotest pressure stenciling mandatory?
  • Ans. 

    Yes, Hydrotest pressure stenciling is mandatory during pipe material inspection.

    • Hydrotest pressure stenciling is mandatory to ensure that the pipe has been tested to the required pressure.

    • It helps in identifying the maximum pressure the pipe can withstand.

    • Stenciling also provides important information for future maintenance and inspection purposes.

    • Failure to stencil the hydrotest pressure can lead to confusion and pote

  • Answered by AI
  • Q2. 2.Blasting & painting inspection procedure? 3.Difference between Asme sec VIII div 1 &2. 3.Does Radiation content of the material shown in the MTC ? If so what is the Becquerel limit?. 4.how many QA/QC dos...
  • Ans. 

    Blasting & painting inspection procedures involve checking surface preparation, coating application, and quality control measures.

    • Inspect surface preparation for cleanliness and roughness before blasting.

    • Check blasting process for proper abrasive material, pressure, and coverage.

    • Inspect painting application for thickness, adhesion, and uniformity.

    • Verify quality control measures such as dry film thickness testing and ho...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Study well and recall codes & standards regularly.

Interview questions from similar companies

I appeared for an interview before Dec 2020.

Interview Questionnaire 

2 Questions

  • Q1. Basic questions testing your technical skills
  • Q2. Be confident with your answers

Interview Preparation Tips

Interview preparation tips for other job seekers - Most of the questions asked were basic technical questions. Being confident is the key
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - Group Discussion 

Normal GD.Just brush up contemporary topics

Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about yourself
  • Q2. Mechanical Engineering Technical questions related to refrigeration

Interview Preparation Tips

Topics to prepare for Bharat Petroleum Assistant Manager interview:
  • Mechanical Engineering
  • General knowledge

I applied via Company Website and was interviewed before May 2017. There were 2 interview rounds.

Interview Preparation Tips

Round: Resume Shortlist
Experience: I have diploma °ree both in mechanical engineering

General Tips: My interview was held in bombay at head office of aarviencon.limited by H.R deportment darshan patel for 30 min at this time i maintain my pecence.
the question was realeted my subject mechanical engg and spoken english
Skills: communication skill, Communication, Leadership, Presentation Skills, Decision Making Skills
Duration: 1-4 weeks

I appeared for an interview before Jun 2016.

Interview Preparation Tips

Round: Group Discussion
Experience: After topic was announced , we were given one minute time to think about it. We wrote our points on a paper given to us. After some time ,One person started to speak about the topic . Peoples were giving their views one after other. I got chance to speak two times in the time period of 15 minutes. I put my points . Finally it ended well.
Tips: Speak at least for two times , put yr points as early as possible otherwise some other might have same view.if he would speak before u then u have to think something different again.u might not get chance to speak again.
Duration: 15 minutes

Round: Technical + HR Interview
Experience: Selection process was mainly depends on your performance in GATE exam and academic results. 15-20 % weightage was for this round and GD.
They asked few questions (basic ) related to technical and HR.

College Name: NIT Jalandhar

I applied via Walk-in and was interviewed in Nov 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. I'm autocad draftsman solidworks designer engineer
  • Q2. Production quality manufacturing company

Interview Preparation Tips

Interview preparation tips for other job seekers - Mechanical engineering
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Project related details
  • Q2. Problem facing regarding project
  • Ans. 

    The main problem facing the project is the lack of clear communication between team members.

    • Lack of clear communication leading to misunderstandings and delays

    • Team members not sharing important information with each other

    • Difficulty in coordinating tasks and aligning goals

    • Possible solutions include regular team meetings, clear communication channels, and project management tools

  • Answered by AI

Mechanical Engineer Interview Questions & Answers

Saudi Aramco user image Katamaneni Koteswararao

posted on 3 Jun 2022

I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(6 Questions)

  • Q1. Explain your self and where did you working current in 2014
  • Q2. Which gas can use for while hot/live tapping
  • Ans. 

    Nitrogen gas is commonly used for hot/live tapping in mechanical engineering.

    • Nitrogen gas is inert and non-reactive, making it safe to use in hot/live tapping processes.

    • It helps to create a protective atmosphere to prevent explosions or fires.

    • Nitrogen gas is readily available and cost-effective.

    • Other gases like argon or carbon dioxide can also be used depending on the specific requirements.

  • Answered by AI
  • Q3. Which method can we follow for railway/road/river crossings
  • Ans. 

    Various methods can be used for railway/road/river crossings depending on the location and other factors.

    • Bridges can be built over the crossing

    • Tunnels can be dug under the crossing

    • Level crossings can be used for roads

    • Flyovers can be constructed for roads

    • Ferries can be used for river crossings

    • Aqueducts can be built for waterways

    • Location, traffic volume, and safety considerations must be taken into account when choosing

  • Answered by AI
  • Q4. Which procedure can follow for pipe lines welding while route and filling
  • Ans. 

    The procedure for pipe lines welding while route and filling involves several steps.

    • Clean the area to be welded thoroughly

    • Tack weld the pipes together

    • Weld the root pass

    • Fill the remaining gap with weld metal

    • Perform post-weld heat treatment if required

    • Inspect the weld for defects

  • Answered by AI
  • Q5. Cross country pipeline code - Nitrogen
  • Q6. Explain About RT, UT, and magnetic partials
  • Ans. 

    RT, UT, and magnetic partials are non-destructive testing methods used in engineering.

    • RT stands for Radiographic Testing and uses X-rays or gamma rays to inspect the internal structure of a material.

    • UT stands for Ultrasonic Testing and uses high-frequency sound waves to detect flaws or defects in a material.

    • Magnetic particle testing uses magnetic fields and iron particles to detect surface and slightly subsurface defec...

  • Answered by AI
Round 3 - Assignment 

What IS API 5L

Round 4 - Coding Test 

What is ASME B 16.5

Round 5 - Coding Test 

What is ASME IX

Round 6 - Coding Test 

Whatbis ASME B 31.4

Interview Preparation Tips

Topics to prepare for Saudi Aramco Mechanical Engineer interview:
  • ASME, API, ASTM, ANSI,
Interview preparation tips for other job seekers - Feel free just listion and first what they are asking then don't give chance to them ask any other questions.
Even I attended in Chennai for other company but they call me for as a Project manager interview and they ask me questions in design, fabrication and supply time management. Then it's confirmed that post they already reserved for some others. If they reserve already they should not call for interveiw.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Explain Challenges with Well Testing in the field.
  • Ans. 

    Challenges in well testing include equipment malfunctions, environmental factors, and data interpretation.

    • Equipment malfunctions can lead to inaccurate results.

    • Environmental factors such as weather conditions or nearby activities can affect testing.

    • Data interpretation can be complex and require specialized knowledge.

    • Pressure build-up in the well can also pose challenges during testing.

  • Answered by AI
Round 1 - Aptitude Test 

Hard very very hard test

Round 2 - Technical 

(1 Question)

  • Q1. Annual oil production in India.
  • Ans. 

    India's annual oil production is approximately 700,000 barrels per day.

    • India is heavily dependent on oil imports, with domestic production meeting only about 20% of its total demand.

    • The country has several oil refineries, including the Jamnagar Refinery, which is the largest in the world.

    • India's oil production has been declining in recent years due to aging fields and lack of investment in exploration and production.

    • Th...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - There is no alternate option for hard work

AL-SUWAIDI INDUSTRIAL SERVICES Interview FAQs

How many rounds are there in AL-SUWAIDI INDUSTRIAL SERVICES Quality Assurance and Quality Control Mechanical Engineer interview?
AL-SUWAIDI INDUSTRIAL SERVICES interview process usually has 2 rounds. The most common rounds in the AL-SUWAIDI INDUSTRIAL SERVICES interview process are Resume Shortlist and Technical.
What are the top questions asked in AL-SUWAIDI INDUSTRIAL SERVICES Quality Assurance and Quality Control Mechanical Engineer interview?

Some of the top questions asked at the AL-SUWAIDI INDUSTRIAL SERVICES Quality Assurance and Quality Control Mechanical Engineer interview -

  1. 2.Blasting & painting inspection procedure? 3.Difference between Asme sec VIII ...read more
  2. 1.during pipe material inspection is Hydrotest pressure stenciling mandato...read more

Tell us how to improve this page.

AL-SUWAIDI INDUSTRIAL SERVICES Quality Assurance and Quality Control Mechanical Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Shell Interview Questions
4.0
 • 195 Interviews
Bharat Petroleum Interview Questions
4.1
 • 149 Interviews
Schlumberger Interview Questions
3.9
 • 140 Interviews
ExxonMobil Interview Questions
3.8
 • 65 Interviews
bp Interview Questions
3.8
 • 62 Interviews
Saudi Aramco Interview Questions
4.5
 • 56 Interviews
Baker Hughes Interview Questions
4.0
 • 55 Interviews
View all

AL-SUWAIDI INDUSTRIAL SERVICES Quality Assurance and Quality Control Mechanical Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 1 Review and Rating
Mechanical Supervisor
11 salaries
unlock blur

₹8 L/yr - ₹15 L/yr

Mechanical Engineer
8 salaries
unlock blur

₹8 L/yr - ₹15 L/yr

Mechanical Maintenance Engineer
6 salaries
unlock blur

₹6 L/yr - ₹18 L/yr

Safety Officer
6 salaries
unlock blur

₹5 L/yr - ₹12 L/yr

Safety Supervisor
5 salaries
unlock blur

₹8.4 L/yr - ₹17 L/yr

Explore more salaries
Compare AL-SUWAIDI INDUSTRIAL SERVICES with

Indian Oil Corporation

4.4
Compare

Shell

4.0
Compare

Bharat Petroleum

4.1
Compare

Hindustan Petroleum

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview