Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Advik Hi Tech Team. If you also belong to the team, you can get access from here

Advik Hi Tech Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Advik Hi Tech Assistant Manager Quality Interview Questions and Answers

Updated 30 Jan 2022

Advik Hi Tech Assistant Manager Quality Interview Experiences

1 interview found

I applied via Recruitment Consultant

Interview Questionnaire 

1 Question

  • Q1. Questions about SPC,MSA & Quality tools

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic application of 7QC Tools, Strong knowledge on Core Tools specially on SPC, Six sigma & DOE knowledge preferred

Interview questions from similar companies

I applied via Referral and was interviewed in Aug 2018. There were 2 interview rounds.

Interview Preparation Tips

Round: Resume Shortlist
Experience: By skill specialist & interview call;regarding knowledge of domain.

General Tips: Krishna maruti group is very excellent place of working.big group..many plants..zero tension of job security..means a viable place to do long service.no late sitting..
Culture is greater govt.than central govt offices.
Negative is higher mismatch between ctc & in hand.
10% of basic they deduct for superannuation fund from AM level..which is unaccountable.
Avg..1000rs deduction for lunch mandatory for bad canteen good & uniform deduction.
I means to say ,anybody should discuss only in hand salary during interview.means a monthly ctc of 60k became 45k & avg 4.5k will never receive(lunch/uniform/s.a.)
Duration: <1 week
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Introduction of ypur
  • Ans. 

    I am a highly experienced Sr. Engineer with a strong background in various engineering disciplines.

    • Over 10 years of experience in mechanical, electrical, and civil engineering

    • Led multiple successful projects from concept to completion

    • Proficient in CAD software such as AutoCAD and SolidWorks

  • Answered by AI
  • Q2. Salary discussion and discussion about pearks.
Round 3 - Technical 

(2 Questions)

  • Q1. Your kra and dwm Discussion related to your work field.
  • Q2. Why we select you ,what is your goods & bad,

Interview Preparation Tips

Topics to prepare for Krishna Maruti Senior Engineer interview:
  • Line balacing
  • Lean Manufacturing Tools
  • 4m change
  • Redbin analysis
  • Rejection Control
  • Productivity Improvement
  • OEE Calculation
  • Kaizen Implementation
  • 5S System
  • Breakdown Analysis
  • Process parameters
  • Measuring instrument
  • MSA
  • SPC Study
Interview preparation tips for other job seekers - Interviewer is just seeking a experience holder who is having relevant knowledge. And uses the key tells
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is Tolerance Mode
  • Ans. 

    Tolerance Mode is a feature in some electronic devices that allows for a certain level of deviation or error without triggering an alarm or shutdown.

    • Tolerance Mode is commonly used in industrial settings to prevent unnecessary shutdowns due to minor fluctuations in readings.

    • It can be set to allow for a specific range of values before taking action.

    • For example, a temperature sensor in a manufacturing plant may be set to...

  • Answered by AI
  • Q2. How to Overcome from Temp.
  • Ans. 

    To overcome from temporary setbacks, it is important to stay positive, seek support, set goals, and take action.

    • Stay positive and maintain a growth mindset

    • Seek support from friends, family, or a mentor

    • Set specific, achievable goals to work towards

    • Take action by creating a plan and following through with it

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. About plastic material
  • Q2. About plastic injection molding machine
  • Q3. About 4m change
Round 3 - HR 

(2 Questions)

  • Q1. About family background
  • Q2. About current company

Interview Preparation Tips

Interview preparation tips for other job seekers - Join if you want salary hike but your personal life will destroy
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jun 2022. There were 3 interview rounds.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Regarding press tool design
  • Q2. Regarding jig and fixture
Round 2 - Technical 

(2 Questions)

  • Q1. Family bag ground
  • Q2. Personal questions
Round 3 - HR 

(1 Question)

  • Q1. Personal questions
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic questions and some techinical
Round 3 - Technical 

(1 Question)

  • Q1. Have been asked deep process questions
Round 4 - Group Discussion 

Have been asked core knowledge of process

Interview Preparation Tips

Interview preparation tips for other job seekers - Always write those skills in resume in which u have core knowledge
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. How to handle customer complain used quality tool
  • Ans. 

    Use quality tools like Pareto chart, fishbone diagram, and 5 Whys to analyze and address customer complaints.

    • Identify the root cause of the complaint using tools like fishbone diagram.

    • Prioritize the issues using a Pareto chart to focus on the most critical problems first.

    • Use the 5 Whys technique to dig deeper into the root cause of the complaint.

    • Implement corrective actions based on the analysis to prevent similar comp

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. 7qc tools & describe it as per example
  • Ans. 

    7QC tools are a set of quality control tools used for process improvement and problem-solving.

    • Check sheet: Used to collect and analyze data, such as tallying defects in a manufacturing process.

    • Pareto chart: Helps identify the most significant factors contributing to a problem, based on the 80/20 rule.

    • Cause and effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.

    • Histogram: Repre...

  • Answered by AI
  • Q2. Difference between QA & QC
  • Ans. 

    QA focuses on preventing defects in the process, while QC focuses on identifying defects in the product.

    • QA is process oriented, focusing on preventing defects by improving processes and procedures.

    • QC is product oriented, focusing on identifying defects through testing and inspection.

    • QA involves activities like reviews, audits, and process improvements.

    • QC involves activities like testing, inspections, and quality contro...

  • Answered by AI
  • Q3. Define of FMEA TYPE
  • Ans. 

    FMEA stands for Failure Modes and Effects Analysis, a systematic method for identifying and preventing potential failures in a system.

    • FMEA is a structured approach to identifying and prioritizing potential failure modes in a system.

    • It involves analyzing the potential effects of these failures and developing mitigation strategies.

    • FMEA helps in improving the reliability, safety, and quality of a system or process.

    • There a...

  • Answered by AI
  • Q4. Process & product audit type of poka yoke
  • Ans. 

    Process & product audit type of poka yoke ensures errors are prevented during audits.

    • Poka yoke in process audit involves using checklists to ensure all steps are followed correctly

    • Poka yoke in product audit involves using sensors to detect defects before they occur

    • Examples include using color-coded labels to prevent mix-ups in audits

  • Answered by AI
  • Q5. 8D Capa, 5S, pervios company job profile and DWM
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Injection molding process
  • Q2. Six step study ,
  • Ans. Gate freeze, holding, pressure drop, viscosity, cooling or dimensions study.
  • Answered by Mohammad Ali

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledge in robo better

Advik Hi Tech Interview FAQs

How to prepare for Advik Hi Tech Assistant Manager Quality interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Advik Hi Tech. The most common topics and skills that interviewers at Advik Hi Tech expect are Apqp, Communication, Control Plan, Customer Handling and ISO 14001.

Tell us how to improve this page.

Interview Questions from Similar Companies

Krishna Maruti Interview Questions
4.0
 • 93 Interviews
Delphi TVS Interview Questions
3.9
 • 84 Interviews
Hyundai Mobis Interview Questions
3.8
 • 64 Interviews
Faurecia Interview Questions
3.9
 • 63 Interviews
Tata Cummins Interview Questions
4.4
 • 60 Interviews
SKH Metals Interview Questions
3.9
 • 54 Interviews
Michelin Interview Questions
3.9
 • 51 Interviews
View all
Advik Hi Tech Assistant Manager Quality Salary
based on 7 salaries
₹7.5 L/yr - ₹8.7 L/yr
At par with the average Assistant Manager Quality Salary in India
View more details

Advik Hi Tech Assistant Manager Quality Reviews and Ratings

based on 3 reviews

4.6/5

Rating in categories

4.7

Skill development

4.3

Work-life balance

4.4

Salary

4.5

Job security

4.5

Company culture

4.6

Promotions

4.4

Work satisfaction

Explore 3 Reviews and Ratings
Senior Engineer
221 salaries
unlock blur

₹3 L/yr - ₹7.1 L/yr

Quality Engineer
136 salaries
unlock blur

₹1.2 L/yr - ₹4.5 L/yr

Assistant Manager
124 salaries
unlock blur

₹5.7 L/yr - ₹10.5 L/yr

Production Engineer
87 salaries
unlock blur

₹1.5 L/yr - ₹4.5 L/yr

Engineer
85 salaries
unlock blur

₹2.2 L/yr - ₹4.2 L/yr

Explore more salaries
Compare Advik Hi Tech with

Delphi TVS

3.9
Compare

Motherson Automotive Technologies and Engineering

3.8
Compare

Belrise Industries

3.8
Compare

Krishna Maruti

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview