Upload Button Icon Add office photos

Filter interviews by

Adani Electricity Electrical Project Engineer Interview Questions and Answers

Updated 10 Feb 2025

Adani Electricity Electrical Project Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is the age of electric hand glows ?
  • Ans. 

    The age of electric hand gloves depends on the quality and usage, typically lasting for 1-3 years.

    • Age of electric hand gloves varies based on quality and usage

    • Typically last for 1-3 years

    • Regular maintenance can extend their lifespan

  • Answered by AI
  • Q2. What is the vector group of delta-star step down transformer?
  • Ans. 

    The vector group of a delta-star step down transformer is Yd11.

    • The vector group Yd11 indicates that the primary winding is connected in delta (Y) and the secondary winding is connected in star (d) with a phase shift of 30 degrees.

    • Yd11 is a common vector group for step down transformers used in distribution systems.

    • Understanding the vector group is important for proper connection and operation of transformers.

  • Answered by AI

Interview questions from similar companies

I applied via Company Website and was interviewed before Nov 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Types of protection in substation
  • Ans. 

    Substation protection includes overcurrent, earth fault, differential, distance, and backup protection.

    • Overcurrent protection is used to detect and isolate faults caused by excessive current flow.

    • Earth fault protection is used to detect and isolate faults caused by current leakage to earth.

    • Differential protection is used to detect and isolate faults between two parts of a system.

    • Distance protection is used to detect an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Clear your basic concept which is related to work experience

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. I did degree in electrical,but didn't get my promotion as per the rule,and didn't get pension as per my salary,which is terrible for me and my family.
  • Ans. I want to extend my job here
  • Answered Anonymously
  • Q2. I am enthusiastic ly keen for job after retirement

Interview Preparation Tips

Interview preparation tips for other job seekers - Ready to do my work again,if I will get the opportunity

I applied via Recruitment Consultant and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. About my site experience, my academic qualification and check my technical skills & abilities to handle the different different situations at site.

Interview Preparation Tips

Interview preparation tips for other job seekers - Academic knowledge & communication skills should be sound.

I applied via Referral and was interviewed in Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. As related to gas process and control

Interview Preparation Tips

Interview preparation tips for other job seekers - It was good

Interview Questionnaire 

5 Questions

  • Q1. What is difference between GTAW and TIG welding
  • Ans. 

    GTAW and TIG welding are the same process, with GTAW being the technical term and TIG being the commonly used name.

    • GTAW stands for Gas Tungsten Arc Welding, while TIG stands for Tungsten Inert Gas welding.

    • Both processes use a non-consumable tungsten electrode to create an arc for welding.

    • GTAW and TIG welding are often used interchangeably, with TIG being the more commonly used term in industries.

    • The main difference lie...

  • Answered by AI
  • Q2. Draw Mahanagar gas network diagram with pressure variation
  • Ans. 

    A Mahanagar gas network diagram with pressure variation needs to be drawn for the Project Engineer interview.

    • The diagram should include all the pipelines and their respective pressure levels.

    • The pressure variation should be shown using different colors or shades.

    • The diagram should also include the location of gas stations and regulators.

    • The pressure levels should be labeled and explained in a legend.

    • The diagram should

  • Answered by AI
  • Q3. What is risk and hazard
  • Ans. 

    Risk is the likelihood of harm or loss, while hazard is the potential source of harm or danger.

    • Risk refers to the probability of an event occurring and the potential consequences of that event.

    • Hazard is anything that has the potential to cause harm, such as chemicals, machinery, or natural disasters.

    • Identifying and managing risks and hazards is important in ensuring safety and preventing accidents.

    • Examples of hazards i...

  • Answered by AI
  • Q4. Methane chemical composition
  • Ans. 

    Methane is a chemical compound with the molecular formula CH4.

    • Methane is the simplest hydrocarbon.

    • It is a colorless, odorless gas.

    • It is highly flammable and burns with a blue flame.

    • Methane is the main component of natural gas.

    • It is produced naturally by anaerobic digestion of organic matter.

    • Methane is used as a fuel for heating and cooking.

    • It is also used as a feedstock for the production of chemicals such as methanol

  • Answered by AI
  • Q5. Pipe diameter used in mahanagar gas
  • Ans. 

    The pipe diameter used in Mahanagar Gas varies depending on the specific project requirements.

    • The pipe diameter used in Mahanagar Gas projects is determined based on factors such as gas flow rate, pressure, and distance.

    • For high-pressure gas transmission pipelines, larger diameter pipes are typically used to minimize pressure drop.

    • In distribution pipelines, smaller diameter pipes are used to supply gas to individual co...

  • Answered by AI

I applied via Approached by Company and was interviewed before Apr 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

This has two papers one technical and one non technical
Technical has only two subjects machines and power systems 100 ques 1 hour.
Non technical exam has 50 ques 1/2hour.

Round 3 - HR 

(4 Questions)

  • Q1. Share details of your previous job.
  • Q2. Why should we hire you?
  • Q3. What are your strengths and weaknesses?
  • Q4. Tell me about yourself.
Round 4 - Technical 

(1 Question)

  • Q1. Star delta connection Distribution transformer Colorcoding of conductor Earthing vs grounding Ques on machine efficiency and stability.
  • Ans. 

    Questions related to electrical engineering concepts such as star delta connection, distribution transformer, color coding of conductor, earthing vs grounding, machine efficiency and stability.

    • Star delta connection is a method of starting three-phase induction motors.

    • Distribution transformer is used to step down high voltage to low voltage for distribution purposes.

    • Color coding of conductor is used to identify the func...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for CESC Executive Engineer interview:
  • Electrical Machines
  • Power systems
  • Measurement
Interview preparation tips for other job seekers - Get good knowledge of theoretical technical subjects.

I applied via Campus Placement and was interviewed before Nov 2021. There were 2 interview rounds.

Round 1 - One-on-one 

(1 Question)

  • Q1. Electrical distribution
Round 2 - HR 

(1 Question)

  • Q1. HR related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while interview, try to answer all questions

I applied via Naukri.com and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Question-related to substation layout, earthing, GIS, transformers, different Indian and standards and codes.

Interview Preparation Tips

Interview preparation tips for other job seekers - be specific to answers and try to be in short. don't be shy about asking about salary packages ..

Interview Questionnaire 

1 Question

  • Q1. Be prepare about power distribution knowledge...

Adani Electricity Interview FAQs

How many rounds are there in Adani Electricity Electrical Project Engineer interview?
Adani Electricity interview process usually has 1 rounds. The most common rounds in the Adani Electricity interview process are Technical.
What are the top questions asked in Adani Electricity Electrical Project Engineer interview?

Some of the top questions asked at the Adani Electricity Electrical Project Engineer interview -

  1. What is the vector group of delta-star step down transform...read more
  2. What is the age of electric hand glow...read more

Tell us how to improve this page.

Adani Electricity Electrical Project Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Adani Power Interview Questions
3.9
 • 218 Interviews
Tata Power Interview Questions
3.9
 • 162 Interviews
NTPC Interview Questions
4.2
 • 158 Interviews
Torrent Power Interview Questions
3.7
 • 126 Interviews
ReNew Interview Questions
4.2
 • 87 Interviews
Vestas Interview Questions
4.2
 • 83 Interviews
Jakson Group Interview Questions
4.2
 • 78 Interviews
Siemens Energy Interview Questions
4.1
 • 73 Interviews
View all
Adani Electricity Electrical Project Engineer Salary
based on 18 salaries
₹4.8 L/yr - ₹7 L/yr
12% more than the average Electrical Project Engineer Salary in India
View more details

Adani Electricity Electrical Project Engineer Reviews and Ratings

based on 3 reviews

4.0/5

Rating in categories

4.5

Skill development

4.4

Work-life balance

4.2

Salary

2.3

Job security

3.3

Company culture

2.3

Promotions

2.6

Work satisfaction

Explore 3 Reviews and Ratings
Senior Executive
89 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
82 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy General Manager
60 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
44 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
39 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Adani Electricity with

Tata Power

3.9
Compare

Reliance Power

4.1
Compare

CESC

3.8
Compare

Torrent Power

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview