Add office photos
Filter interviews by
ACS Group Engineer Trainee Interview Questions and Answers
ACS Group Engineer Trainee Interview Experiences
1 interview found
GURU ESWAR B
I applied via Campus Placement and was interviewed in Jan 2024. There were 2 interview rounds.
It is the round of aptitude consist of 20 questions
(2 Questions)
- Q1. Difference between brittle and ductile material
- Ans.
Brittle materials break without significant deformation, while ductile materials can undergo significant deformation before breaking.
Brittle materials break with little or no plastic deformation
Ductile materials can undergo significant plastic deformation before breaking
Examples of brittle materials: glass, ceramics
Examples of ductile materials: metals like copper, aluminum
- Q2. What is sn diagram
- Ans.
SN diagram is a graphical representation of stress versus number of cycles to failure for a material.
SN diagram helps in understanding the fatigue behavior of a material under cyclic loading.
It shows the relationship between stress amplitude and the number of cycles to failure.
Materials with higher endurance limits have steeper slopes on the SN diagram.
SN diagrams are commonly used in engineering to design components t...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
SUNIL KUMAR V
Selected
I applied via Walk-in and was interviewed before Oct 2023. There were 3 interview rounds.
Gk aptitude technical related to your branch 50 marks total
Any current affairs Topic
(2 Questions)
- Q1. Tell me about your self
- Ans.
I am a recent graduate with a degree in engineering, eager to learn and grow in a professional setting.
Recent engineering graduate
Eager to learn and grow
Passionate about applying engineering principles in real-world scenarios
- Q2. Which is your favourite subject and the depth of subject is most important the question are very difficult
Interview Preparation Tips
Engineer Trainee Interview Questions & Answers
Mann And Hummel Filter
Anonymous
posted on 5 Apr 2024
Selected
I applied via Referral and was interviewed before Apr 2023. There were 3 interview rounds.
(4 Questions)
- Q1. Questions on engineering drawing like 1st angle and third angle projection
- Q2. Questions on strength of materials like stress, strain, shear force and bending moment
- Q3. Questions on DFMEA
- Q4. Types of plastics
- Ans.
Plastics are synthetic materials made from polymers that can be molded into different shapes. They are categorized into several types based on their properties and uses.
Thermoplastics: can be melted and reshaped multiple times (e.g. PET, PVC)
Thermosetting plastics: harden irreversibly when heated (e.g. epoxy resin, bakelite)
Bioplastics: derived from renewable resources (e.g. PLA, PHA)
Engineering plastics: have superior
(4 Questions)
- Q1. Introduce yourself
- Q2. Family background
- Q3. Why you are interested our company
- Q4. What do you know about our company
(1 Question)
- Q1. Developing of 3d model from given 2d drawing using catia
Interview Preparation Tips
Be punctual
Be confident and carry all the necessary documents required
Apprenticeship Trainee Interview Questions & Answers
LANXESS India Private Limited
Anonymous
posted on 9 Feb 2024
Selected
I applied via LinkedIn and was interviewed in Jan 2024. There were 2 interview rounds.
(5 Questions)
- Q1. Chemical name ,
- Ans. Styrine, DVB 80% dayvinayl binzene, DCE daycloreethine, cloremethayl ether,Dempa dayethalymonopropralamine amine z , DMEA DAYMETHALY ENTHALPY AMINE, OLLEUM H²S²O⁷65%, sulphuric acid 98% , casutic Naoh 48% , TMA trymithaely amine, ACN acrorontrile, methonol, TBA trybeutlyamine ,
- Q2. Pumps, rector, safety
- Q3. Tank farm tanker loadingandunloading
- Q4. Cllasfaction,distilision,aminez distlition
- Q5. HCl distilition
Job lanxess apperetence and freezer
Interview Preparation Tips
AMIT VERMA
Aptitude test total 30 question
(2 Questions)
- Q1. Technical interview Branch wise
- Q2. What is unit of hydraulic pressure
- Ans.
The unit of hydraulic pressure is Pascal (Pa).
The unit of hydraulic pressure is commonly expressed in Pascal (Pa).
Other units used for hydraulic pressure include pounds per square inch (psi) and bar.
1 Pascal is equal to 1 Newton per square meter.
Hydraulic systems typically operate at pressures ranging from a few hundred to several thousand psi.
Graduate Apprenticeship Trainee Interview Questions & Answers
Sulzer
Anonymous
posted on 23 Jul 2024
Selected
I applied via Approached by Company and was interviewed before Jul 2023. There were 3 interview rounds.
Basic of General aptitude
(2 Questions)
- Q1. Questions on education background
- Q2. Engineering subjects questions like formula, calculation, units, drawing reading
(2 Questions)
- Q1. Why should we hire you
- Q2. Are you working in shift
I applied via Recruitment Consulltant
Interview Questionnaire
3 Questions
- Q1. Not at all ansking They want manpower new because old member doesn't work there max 6 min
- Q2. Only family background
- Q3. Family conditions and some question from diploma an why u r doing job
Interview Preparation Tips
If u do some mistake on that day. Then another day all the production member abuse and close the gate
In last I am not give suggestion to do job there... If someone wants job . And have a call from bajaj motors
I have say to do job in shop ,garage ,bar shop etc not in bajaj motors 🙏🏻🙏🏻
Graduate Engineer Trainee (Get) Interview Questions & Answers
Xylem Water Solutions
Anonymous
posted on 21 Apr 2022
I applied via Campus Placement and was interviewed in Oct 2021. There were 2 interview rounds.
(1 Question)
- Q1. What's is Stress - Strain ?
- Ans.
Stress is the force applied to an object, while strain is the deformation or change in shape that results from that force.
Stress is measured in units of force per unit area, such as pounds per square inch (psi) or newtons per square meter (N/m²).
Strain is measured as a ratio of the change in length or shape of an object to its original length or shape.
Stress and strain are related by a material's modulus of elasticity,...
Interview Preparation Tips
Neem Trainee Interview Questions & Answers
American Axle & Manufacturing
Anonymous
posted on 2 May 2022
I applied via Referral and was interviewed before May 2021. There were 2 interview rounds.
You will be asked some basic questions from your subject
(1 Question)
- Q1. About yourself, Your Project Work, Your Favourite Subject, Your Weakness and Strength, Your Hobby, Etc
Interview Preparation Tips
- Your Project Work
- Hobby
- About Yourself
- Why choose Manufacturing
- Strength and Weakness
Graduate Engineer Trainee (Get) Interview Questions & Answers
Johnson Matthey
Anonymous
posted on 5 Feb 2015
Interview Preparation Tips
Experience: About 15 students were selected for the final interview
Duration: 60 minutes
Round: Interview
Experience: It had both technical and HR. The panelist had 3 technical guys along with 1 HR.
the first question asked was 'tell me about yourself'.
They then moved on to technical questions.I was first asked what topic I am comfortable with. i told them 2-3 topics of chemical engineering- heat and mass transfer, reaction engineering, general equipments used in plants . They asked questions on the same for the next 10 minutes.
I did not guess answers and i straight away told them when I was not sure of the answer.
After this, general questions related to operations in chemical plants were asked. Some scenarios were given and I was asked to make decisions. i answered them. They then started talking about my resume. After a discussion for about 10 minutes, I knew I was getting the offer.
Tips: Practice HR questions, preferably with a group. Confidence is very important.
Collect a common set of HR questions, write down the points that you want to speak beforehand and draw a basic framework that you can adhere to while answering.
General Tips: Do not procrastinate when it comes to preparing.
a decent knowledge is a must for a core job.
never try to blindly copy what others are doing. Look for your strengths and focus on what you want to achieve.
Form a decent study group. It helps a lot in preparing case studies, guesstimates and GDs. Practice mock interviews.
College Name: IIT KANPUR
ACS Group Interview FAQs
Tell us how to improve this page.
ACS Group Interviews By Designations
- ACS Group Software Engineer Interview Questions
- ACS Group Associate/Senior Associate -(Nontechnical) Interview Questions
- ACS Group Consultant Interview Questions
- ACS Group Engineer Trainee Interview Questions
- ACS Group HR Executive Interview Questions
- ACS Group Java Developer Interview Questions
- ACS Group Lead Business Analyst Interview Questions
- ACS Group Marketing and Human Resources Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Graduate Engineer Trainee (Get) Interview Questions
- Diploma Trainee Engineer Interview Questions
- Apprentice Trainee Interview Questions
- Apprenticeship Trainee Interview Questions
- Trainee Interview Questions
- Graduate Apprentice Trainee Interview Questions
- Graduate Apprenticeship Trainee Interview Questions
- Management Trainee Interview Questions
- Show more
ACS Group Engineer Trainee Interview Process
based on 1 interview
Interview experience
Engineer Trainee Interview Questions from Similar Companies
|
Software Engineer
33
salaries
|  ₹4 L/yr - ₹14.9 L/yr |
|
Senior Software Engineer
32
salaries
| ₹8.7 L/yr - ₹30 L/yr |
|
Senior Associate
26
salaries
| ₹3.2 L/yr - ₹8.1 L/yr |
|
Associate
24
salaries
| ₹2.7 L/yr - ₹5.3 L/yr |
|
Associate Recruiter
16
salaries
| ₹2.7 L/yr - ₹4.8 L/yr |
Tata Group
Reliance Industries
Adani Group
Mahindra & Mahindra
- Home >
- Interviews >
- ACS Group Interview Questions >
- ACS Group Engineer Trainee Interview Questions
