Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Knorr-Bremse Team. If you also belong to the team, you can get access from here

Knorr-Bremse Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Knorr-Bremse Trainee Interview Questions and Answers

Updated 26 Feb 2024

Knorr-Bremse Trainee Interview Experiences

3 interviews found

Trainee Interview Questions & Answers

user image AMIT VERMA

posted on 26 Feb 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Aptitude test total 30 question

Round 2 - Technical 

(2 Questions)

  • Q1. Technical interview Branch wise
  • Q2. What is unit of hydraulic pressure
  • Ans. 

    The unit of hydraulic pressure is Pascal (Pa).

    • The unit of hydraulic pressure is commonly expressed in Pascal (Pa).

    • Other units used for hydraulic pressure include pounds per square inch (psi) and bar.

    • 1 Pascal is equal to 1 Newton per square meter.

    • Hydraulic systems typically operate at pressures ranging from a few hundred to several thousand psi.

  • Answered by AI

Trainee Interview Questions & Answers

user image Anonymous

posted on 24 May 2023

Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Multiple choice questions

Round 3 - Technical 

(2 Questions)

  • Q1. What is stress ?
  • Ans. 

    Stress is a physical or emotional response to a challenging situation that can affect a person's mental and physical well-being.

    • Stress can be caused by various factors such as work pressure, financial problems, relationship issues, etc.

    • It can lead to symptoms such as anxiety, depression, headaches, muscle tension, and fatigue.

    • Effective stress management techniques include exercise, meditation, deep breathing, and seeki...

  • Answered by AI
  • Q2. What is the unit of Newton ?
  • Ans. 

    The unit of Newton is kilogram meter per second squared.

    • Newton is the unit of force in the International System of Units (SI)

    • It is defined as the force required to accelerate a mass of one kilogram at a rate of one meter per second squared

    • It is represented by the symbol 'N'

    • Examples of forces measured in Newtons include the weight of an object and the force required to push or pull an object

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive and have potential to achieve the goals

Trainee Interview Questions Asked at Other Companies

Q1. Ques1: There is a big file of words which is dynamically changing ... read more
Q2. Ques 1: An array of n integers is there in which the range of ele ... read more
Q3. Ques 1: You are given pairs of numbers. In a pair the first numbe ... read more
Q4. 1) What was the College project ? 2) Subjects ? 3) Types of cooli ... read more
Q5. During cruise, Thrust equals drag, then how does plane move forwa ... read more

Trainee Interview Questions & Answers

user image Anonymous

posted on 16 Oct 2021

I applied via Recruitment Consultant and was interviewed in Apr 2021. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Personal information about your,your home,your family
  • Q2. Experience related questions
  • Q3. Electric department question

Interview Preparation Tips

Interview preparation tips for other job seekers - Aap apni experience ka acha knowledge rkhiye

Interview questions from similar companies

I applied via Walk-in and was interviewed before Jul 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Working of privious company

Interview Preparation Tips

Interview preparation tips for other job seekers - Very nice interview
Technical round
Hr round
Apptitude test

Interview Preparation Tips

Round: Test
Experience: The first stage involves a test, comprising of around 40 questions, 25 technical questions and 15 logical reasoning and data interpretation questions together. Technical questions were from basic electronics books and also some micro-controller questions, and the LR and DI questions were like any normal questions you would come across for any normal aptitude test. Out of a total of 200 students who wrote the test, 60 or odd people were selected for the interview rounds.
Tips: For aptitude part- Your brains, cause all the questions in this section is easy to solve.

Round: Technical Interview
Experience: The 1st interview was the technical interview round where again basic electronics stuff like transistors as amplifiers, zener diodes and such other simple electronic devices. Here they also ask you about your projects (if any, hope you have done one!) and ask you to validate why you chose to do such and such a project and its relevance in the modern day. A word of caution here would be to put only those projects on your resume' which you can back up and clearly identify the role you have played in it, and explain with clarity on being cross-questioned.
Tips: For the technical part- 8051 UC, 8086 UP, Boylestad, Gaykward.

Round: HR Interview
Experience: If you've done well in the 1st round , then you'll be handed a HR form , which you'll have to fill and wait for the HR round. Beware the HR round might be an elimination round (as some other websites do caution),so be your best, answer any HR question with confidence. Normal HR questions pertaining to family background and your interest in higher studies will be questioned. Hint: If you're interested in doing your GRE/GATE after 4th year, you might not want to mention that. But i didn't have that dilemma to face, but my friends did, so be careful.

General Tips: I have been placed in 3 companies including ROBERT BOSCH, the other 2 being TCS and IBM. Maybe what i want to tell you guys reading this is that, no matter which company you have been placed in / or not placed in, you should always pursue your dream company no matter what, because it is the dream company that gives us true satisfaction of having been placed. I know many of my friends who have been placed but are not happy with having been placed. This s not an emotion that you want to spend during your final year, or even in your life. Had i not been placed in BOSCH , i probably would have pursued it off campus. So to sum it all up, sit for companies you only want to get placed in, or it is similar to having an Eclairs, while you always dreamt of the Bournville.
Typical questions that one should ask during the interview should be (if the interview went smoothly) is "What role/ responsibility will i be allotted to if i join the company?", "What is my career growth?", "Any compensation is being offered or not? "and finally (if the salary is unreasonably low), ask them about the salary and all the benefits involved in it.

Skill Tips: This experience of joining the company that you always dreamed of working for, is truly an exhilarating one. Wishing you all whoever's reading this Gyan edit, will enjoy the experience as much as i did.
Focus on electronic devices, everything from basics, and read up all the books mentioned above by me, and try to remain calm and confident during the whole process.
Skills:
College Name: NIT Surathkal

I applied via PLACEMENT

Interview Preparation Tips

Round: Technical Interview
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course

General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)

I was interviewed before Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. Ocampo, basic electronics and C

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 50

Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering

Interview Preparation Tips

Round: Technical + HR Interview
Experience: Questions from resume only. I have written I like reading books so they asked me last book I read. And some questions related to it.
Tips: Be confident.

College Name: Birla Vishvakarma Mahavidyalaya (BVM) Engineering College

Interview Questionnaire 

5 Questions

  • Q1. Pertaining to the mentioned roles and responsibilities in your resume
  • Q2. Planning and work order creation
  • Q3. Piling activities
  • Q4. Introduction
  • Q5. Cross checking of documents

Interview Preparation Tips

Round: Resume Shortlist
Experience: On the criteria that I scored atleast 60% overall and had no gap between job/s.

I applied via Campus Placement and was interviewed before Mar 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What about compny

Interview Preparation Tips

Interview preparation tips for other job seekers - One year trainee at tata motor ltd pune, at tarine supervisor post. Handling conver line . 50 employees my under working so hadling all employe and line also handling.
Contribute & help others!
anonymous
You can choose to be anonymous

Knorr-Bremse Interview FAQs

How many rounds are there in Knorr-Bremse Trainee interview?
Knorr-Bremse interview process usually has 2-3 rounds. The most common rounds in the Knorr-Bremse interview process are Aptitude Test, Technical and Resume Shortlist.
What are the top questions asked in Knorr-Bremse Trainee interview?

Some of the top questions asked at the Knorr-Bremse Trainee interview -

  1. What is the unit of Newto...read more
  2. What is unit of hydraulic press...read more
  3. Technical interview Branch w...read more

Recently Viewed

INTERVIEWS

TCS

No Interviews

INTERVIEWS

ValeurHr E-Solutions

No Interviews

INTERVIEWS

Brembo Brake India

No Interviews

INTERVIEWS

Allied Jb Friction

No Interviews

INTERVIEWS

Sekhani Industries

No Interviews

INTERVIEWS

Hanon Systems

No Interviews

INTERVIEWS

Rieter

No Interviews

INTERVIEWS

TCS

No Interviews

Tell us how to improve this page.

Knorr-Bremse Trainee Interview Process

based on 2 interviews

Interview experience

2.5
  
Poor
View more
Knorr-Bremse Trainee Salary
based on 22 salaries
₹1.2 L/yr - ₹2.6 L/yr
5% less than the average Trainee Salary in India
View more details

Knorr-Bremse Trainee Reviews and Ratings

based on 15 reviews

4.0/5

Rating in categories

3.7

Skill development

3.9

Work-life balance

3.2

Salary

3.8

Job security

3.8

Company culture

2.9

Promotions

3.6

Work satisfaction

Explore 15 Reviews and Ratings
Senior Engineer
201 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technical Specialist
180 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
177 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
153 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
106 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Knorr-Bremse with

Bosch

4.2
Compare

Siemens

4.1
Compare

ABB

4.1
Compare

Schneider Electric

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent