Upload Button Icon Add office photos

Aarvi Encon

Compare button icon Compare button icon Compare

Filter interviews by

Aarvi Encon Mechanical Maintenance Engineer Interview Questions and Answers

Updated 28 Nov 2024

Aarvi Encon Mechanical Maintenance Engineer Interview Experiences

2 interviews found

Mechanical Maintenance Engineer Interview Questions & Answers

user image Mohammad Mustafizur Rahman

posted on 6 May 2022

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in Nov 2022. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Maintenance procedure of heat exchangers.
  • Ans. 

    Maintenance procedures for heat exchangers involve regular cleaning, inspection, and testing to ensure optimal performance.

    • Regularly clean the heat exchanger tubes to remove any buildup of debris or scale

    • Inspect the heat exchanger for leaks, corrosion, or other signs of damage

    • Test the heat exchanger for efficiency and performance using pressure and temperature measurements

    • Replace any worn out or damaged parts to preven...

  • Answered by AI
  • Q2. Maintenance procedure of tanks, vessels.
  • Ans. 

    Maintenance procedures for tanks and vessels involve regular inspections, cleaning, and repairs to ensure safe and efficient operation.

    • Regularly inspect tanks and vessels for signs of corrosion, leaks, or damage.

    • Clean tanks and vessels to remove buildup of sediment, rust, or other contaminants.

    • Repair any cracks, leaks, or structural damage promptly to prevent further deterioration.

    • Perform routine maintenance tasks such...

  • Answered by AI
  • Q3. Questions related to piping.

I applied via Referral and was interviewed before Aug 2020. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. Conveyor details
  • Q2. Hammer crusher details
  • Q3. Bearing related
  • Q4. Gearbox related
  • Q5. Use of coupling
  • Ans. 

    Couplings are used to connect two shafts together to transmit power.

    • Couplings are used to compensate for misalignment between two shafts.

    • They can also be used to absorb shock and vibration.

    • Common types of couplings include rigid, flexible, and fluid couplings.

    • Examples of applications include pumps, compressors, and conveyors.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't nervous, answer what you know

Mechanical Maintenance Engineer Interview Questions Asked at Other Companies

Q1. What is valve and its types What is coupling and it's types Pump ... read more
Q2. 1. Types of Pump 2. Types of casing 3. Plant process 4. Major mai ... read more
asked in Sodexo
Q3. Types of mechanical seal and how to take mechanical seal number
Q4. How much thikness wire rope used in 15 ton e.o.t crane
Q5. what is pump? types of pump how to do pump overhauling ? types of ... read more

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is the meaning of conveyar
  • Ans. 

    A conveyar is a mechanical device used to transport materials or goods from one place to another.

    • Conveyors are commonly used in industries such as manufacturing, food processing, and logistics.

    • They can be powered by motors, gravity, or manual labor.

    • Examples include belt conveyors, roller conveyors, and screw conveyors.

  • Answered by AI
  • Q2. Why are using angular contact ball bearing in centrifugal pump
  • Ans. 

    Angular contact ball bearings are used in centrifugal pumps for handling both radial and axial loads efficiently.

    • Angular contact ball bearings can handle both radial and axial loads, which are common in centrifugal pumps.

    • They have higher load carrying capacity compared to deep groove ball bearings.

    • Angular contact ball bearings provide better rigidity and accuracy in pump operation.

    • They help in reducing vibration and no...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2023. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. It was more abt checking all the documents.
Round 2 - Technical 

(2 Questions)

  • Q1. Interview was conducted by the client
  • Q2. Piping Related Questions
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Tell me about your previous company experience

I applied via Naukri.com and was interviewed in May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

If 5x + 7 = 22, what is the value of x?
a) 3
b) 5
c) 6
d) 8

Which of the following numbers is a prime number?
a) 22
b) 27
c) 29
d) 32

If it takes 6 people 12 days to complete a task, how long will it take 8 people to complete the same task?
a) 6 days
b) 8 days
c) 9 days
d) 10 days

A pizza with a diameter of 16 inches costs $12. What is the cost per square inch of the pizza?
a) $0.75
b) $1.00
c) $1.50
d) $2.00

If a car travels 80 miles in 2 hours, what is its average speed in miles per hour?
a) 20 mph
b) 40 mph
c) 60 mph
d) 80 mph

What is the next number in the sequence: 1, 3, 6, 10, 15, ____?
a) 20
b) 21
c) 22
d) 23

If the perimeter of a square is 32 cm, what is the length of each side of the square?
a) 4 cm
b) 8 cm
c) 12 cm
d) 16 cm

If a recipe calls for 2 cups of flour to make 12 cookies, how many cups of flour are needed to make 24 cookies?
a) 2 cups
b) 3 cups
c) 4 cups
d) 5 cups

Which of the following angles is acute?
a) 90 degrees
b) 120 degrees
c) 150 degrees
d) 30 degrees

If 3x + 5y = 17 and 2x - 3y = 7, what is the value of x + y?
a) 2
b) 3
c) 4
d) 5

Round 3 - Coding Test 

Write a function that takes in an array of integers and returns the sum of all the even numbers in the array.

Write a function that takes in a string and returns the number of vowels in the string.

Write a function that takes in a string and returns a new string with all the vowels removed.

Write a function that takes in two arrays of integers and returns a new array that contains only the elements that are common to both arrays.

Write a function that takes in an array of integers and returns a new array with the elements sorted in descending order.

Write a function that takes in a string and returns true if the string is a palindrome, and false otherwise.

Write a function that takes in a positive integer and returns the factorial of that number.

Write a function that takes in an array of integers and returns the second largest number in the array.

Write a function that takes in a string and returns a new string with the first letter of each word capitalized.

Write a function that takes in an array of integers and returns the product of all the elements in the array.

I applied via Job Portal and was interviewed in Jun 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Piping Knowledge in oil and Gas field and petrochemical and Hydrocarbon engineering projects

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company and best salary packages

Aarvi Encon Interview FAQs

How many rounds are there in Aarvi Encon Mechanical Maintenance Engineer interview?
Aarvi Encon interview process usually has 1 rounds. The most common rounds in the Aarvi Encon interview process are Technical.
What are the top questions asked in Aarvi Encon Mechanical Maintenance Engineer interview?

Some of the top questions asked at the Aarvi Encon Mechanical Maintenance Engineer interview -

  1. Maintenance procedure of heat exchange...read more
  2. Maintenance procedure of tanks, vesse...read more
  3. Use of coupli...read more

Tell us how to improve this page.

Aarvi Encon Mechanical Maintenance Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Quess Interview Questions
3.9
 • 406 Interviews
Randstad Interview Questions
3.8
 • 259 Interviews
Team Lease Interview Questions
3.9
 • 200 Interviews
Adecco Group Interview Questions
3.7
 • 87 Interviews
ManpowerGroup Interview Questions
3.8
 • 51 Interviews
Iksula Interview Questions
3.5
 • 27 Interviews
Symphoni HR Interview Questions
4.2
 • 20 Interviews
View all
Aarvi Encon Mechanical Maintenance Engineer Salary
based on 42 salaries
₹2.9 L/yr - ₹7.5 L/yr
21% more than the average Mechanical Maintenance Engineer Salary in India
View more details

Aarvi Encon Mechanical Maintenance Engineer Reviews and Ratings

based on 10 reviews

3.8/5

Rating in categories

3.6

Skill development

3.5

Work-life balance

3.4

Salary

1.6

Job security

3.1

Company culture

2.2

Promotions

3.5

Work satisfaction

Explore 10 Reviews and Ratings
Field Engineer
196 salaries
unlock blur

₹3.6 L/yr - ₹5 L/yr

Mechanical Engineer
161 salaries
unlock blur

₹3 L/yr - ₹8.4 L/yr

Inspection Engineer
79 salaries
unlock blur

₹2 L/yr - ₹8 L/yr

Electrical Engineer
76 salaries
unlock blur

₹2.8 L/yr - ₹8.2 L/yr

Mechanical Technician
52 salaries
unlock blur

₹2 L/yr - ₹5.5 L/yr

Explore more salaries
Compare Aarvi Encon with

Quess

3.9
Compare

Team Lease

3.9
Compare

Iksula

3.5
Compare

Randstad

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview