Upload Button Icon Add office photos

Aarvi Encon

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Aarvi Encon Field Engineer Interview Questions and Answers

Updated 15 May 2024

Aarvi Encon Field Engineer Interview Experiences

3 interviews found

Field Engineer Interview Questions & Answers

user image SIVA PERUMAL

posted on 15 May 2024

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Previous experience
  • Q2. Brief introduction
Round 2 - One-on-one 

(1 Question)

  • Q1. Electrical erection

Rate your
company

🤫 100% anonymous

How was your last interview experience?

Share interview

I applied via Recruitment Consulltant and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Plant process related
  • Q2. Trouble shooting in your plant
  • Ans. 

    Troubleshooting in a plant involves identifying and resolving issues that affect production and efficiency.

    • Start by gathering information about the problem and its symptoms

    • Use diagnostic tools and techniques to identify the root cause

    • Develop and implement a plan to address the issue

    • Monitor the situation to ensure the solution is effective

    • Document the problem and solution for future reference

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This company is always wanted to deduct more from your salary,I am not satisfied with the company searching for new job.

Field Engineer Interview Questions Asked at Other Companies

asked in Jio
Q1. What is insulator and conductors and semiconductors
Q2. What should be the tan Delta value of electrical equipment (for e ... read more
Q3. What is the ground clearance of 400KV transmission line.
Q4. Why transformer are rated in KVA.
asked in Jio
Q5. What is telecommunication
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about your self professional and personal
  • Q2. About your past companys

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clear about every point in your resume and self confidence

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. 1.Grade of concrete..
  • Ans. 

    The grade of concrete refers to its strength and durability.

    • Concrete is classified into different grades based on its compressive strength.

    • The grade of concrete is denoted by a number followed by the letter 'M' (e.g., M20, M25).

    • The number represents the compressive strength of concrete in megapascals (MPa) after 28 days of curing.

    • Higher grade concrete has higher strength and is used for heavy-duty structures like bridg...

  • Answered by AI

I applied via AmbitionBox and was interviewed in Sep 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Technical Optical Fibre
  • Q2. Communication Skills

Interview Preparation Tips

Interview preparation tips for other job seekers - Optical Fibre Telecommunication And Project Management And Networking Management All OFC
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Related to current role question
  • Q2. Tell about building coloum and beam size
  • Ans. 

    Column and beam sizes are determined by the load they need to support and the span they need to cover.

    • The size of the column and beam is determined by the load they need to support and the span they need to cover.

    • The material used for the column and beam also affects their size.

    • The size of the column and beam can be calculated using structural engineering software.

    • For example, a 20-foot span with a load of 10,000 pound...

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. What will you do if void present in the structure
  • Ans. 

    I will assess the severity of the void and determine the appropriate course of action.

    • Conduct a thorough inspection of the structure to determine the size and location of the void

    • Evaluate the potential impact of the void on the structural integrity of the building

    • Determine the appropriate repair method based on the severity of the void and the type of structure

    • Consult with structural engineers and other experts as need...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Overall practical based questions related to your work

Skills evaluated in this interview

I applied via Approached by Company and was interviewed before Jul 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Whit is the process of water treatment plant and is functional details.

Interview Preparation Tips

Topics to prepare for ManpowerGroup Civil Engineer interview:
  • Civil Engineering
  • Water Supply
  • preparation
  • Sincerely
Interview preparation tips for other job seekers - Always remember that they saw something in you worthy to interview, take the confidence that they chose you out of all the other applicants as a start. You should read your resume by yourself or share the details of your past experience with yourself or give interview calmly and confidently. Without hazration give your best. I am sure my advice is helpful for us.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(4 Questions)

  • Q1. Building project, All buliding construction , civil engineering
  • Q2. Civil engineering , construction
  • Q3. How building construction
  • Ans. 

    Building construction involves planning, designing, and executing the construction of a building.

    • It starts with site selection and surveying

    • Designing the building and obtaining necessary permits

    • Excavation and foundation work

    • Framing and structural work

    • Installation of utilities and systems

    • Finishing work such as painting and flooring

    • Inspection and final approval

    • Examples include residential homes, commercial buildings, and

  • Answered by AI
  • Q4. Construction releted, and any

Interview Preparation Tips

Interview preparation tips for other job seekers - I, Bholanath Dutta, Civil Engineer' 3years of work experience in civil construction
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(8 Questions)

  • Q1. What is the Full form of TMT
  • Ans. 

    TMT stands for Thermo-Mechanically Treated reinforcement bars used in construction.

    • TMT bars are made by subjecting mild steel bars to a combination of heat treatment and mechanical deformation.

    • This process imparts greater strength and ductility to the bars, making them ideal for use in construction.

    • TMT bars are widely used in reinforced concrete structures such as buildings, bridges, and dams.

    • They offer superior corros...

  • Answered by AI
  • Q2. What is the 500DMeans at TMT bars?
  • Ans. 

    500D means the yield strength of TMT bars is 500 MPa.

    • 500D is a grade of TMT bars used in construction.

    • The 'D' stands for ductility, which is the ability of the material to deform without breaking.

    • The yield strength of 500D TMT bars is 500 MPa.

    • These bars are commonly used in high-rise buildings, bridges, and other structures that require high strength and durability.

  • Answered by AI
  • Q3. What is the required steel at the percentage concrete?
  • Ans. 

    The required steel at the percentage concrete depends on the design and specifications of the structure.

    • The amount of steel reinforcement needed in concrete is determined by the design and specifications of the structure.

    • Factors such as the size and shape of the structure, the loads it will bear, and the desired strength and durability of the concrete will all affect the required steel percentage.

    • The steel percentage c...

  • Answered by AI
  • Q4. What is the stress and strain?
  • Ans. 

    Stress is the force applied per unit area, while strain is the deformation caused by stress.

    • Stress is a measure of the internal forces within a material, while strain is the measure of the deformation of the material.

    • Stress is expressed in units of force per unit area, while strain is expressed as a ratio of the change in length or shape to the original length or shape.

    • Stress and strain are related by the material's el...

  • Answered by AI
  • Q5. Which type of stress failure at brick wall?
  • Ans. 

    The stress failure at brick wall can be due to compressive or tensile stress.

    • Compressive stress failure occurs when the brick wall is unable to withstand the weight or load placed on it.

    • Tensile stress failure occurs when the brick wall is unable to withstand the forces that pull it apart.

    • Cracking, bulging, or collapse of the wall can be signs of stress failure.

    • Reinforcing the wall with steel bars or using thicker brick

  • Answered by AI
  • Q6. White marvel is this rock?
  • Ans. 

    White marble is a metamorphic rock composed of recrystallized carbonate minerals, mainly calcite or dolomite.

    • It is commonly used in construction and sculpture.

    • It is formed from limestone or dolomite that has undergone heat and pressure.

    • It is often found in quarries in countries such as Italy, Greece, and India.

  • Answered by AI
  • Q7. What is myka sis ?
  • Q8. Standerd Coarse sand size?
  • Ans. 

    Standard coarse sand size ranges from 2.0mm to 4.75mm.

    • Standard coarse sand is commonly used in construction and civil engineering projects.

    • It is typically graded between 2.0mm to 4.75mm in size.

    • This type of sand is often used as a base material for concrete and asphalt.

    • It can also be used for drainage systems and as a bedding material for pipes.

    • The size and shape of the sand particles can affect the strength and durabi

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Up above these questions are very good. Very much challenge when you have few time period of project, vast priority of project,and contractors are unidentified what is doing the job first to last .
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Size of slump cone
  • Ans. 

    The size of a slump cone is a tool used in concrete testing to measure the consistency of fresh concrete.

    • The size of a slump cone is typically 12 inches in height.

    • The base diameter of a slump cone is usually 8 inches.

    • The top diameter of a slump cone is typically 4 inches.

    • The size of a slump cone may vary depending on specific testing requirements or standards.

    • The dimensions of a slump cone are important for accurate me...

  • Answered by AI
  • Q2. Estimation of aggregate quantity for 200sqmt slab
  • Ans. 

    To estimate aggregate quantity for a 200sqmt slab, calculate the volume of concrete required and then determine the aggregate quantity based on the mix ratio.

    • Calculate the volume of concrete required for the slab

    • Determine the mix ratio of concrete (e.g., 1:2:4)

    • Calculate the volume of aggregates needed based on the mix ratio

    • Consider the bulk density of aggregates to convert volume to weight

    • Account for wastage and add a

  • Answered by AI
  • Q3. What are previous quality we need to check before casting
  • Ans. 

    Before casting, civil engineers need to check the quality of various elements.

    • Quality of concrete mix

    • Quality of reinforcement bars

    • Quality of formwork

    • Quality of water used in the mix

    • Quality of curing process

  • Answered by AI
  • Q4. How many cubes we have to take for 250cum concrete
  • Ans. 

    The number of cubes required for 250 cubic meters of concrete depends on the size of the cubes.

    • The size of the cubes needs to be specified to determine the number required.

    • The volume of each cube needs to be calculated.

    • Divide the total volume of concrete (250 cubic meters) by the volume of each cube to get the number of cubes required.

    • For example, if the cubes are 1 cubic meter in size, then 250 cubes would be needed.

  • Answered by AI
  • Q5. Post concrete quality inspection?
  • Ans. 

    Post concrete quality inspection involves evaluating the quality of concrete after it has been placed and hardened.

    • Inspect the concrete for any visible defects such as cracks, honeycombing, or segregation.

    • Check the concrete strength by conducting compressive strength tests on samples taken from the structure.

    • Assess the concrete's durability by examining its resistance to factors like freeze-thaw cycles or chemical expo...

  • Answered by AI
Contribute & help others!
anonymous
You can choose to be anonymous

Aarvi Encon Interview FAQs

How many rounds are there in Aarvi Encon Field Engineer interview?
Aarvi Encon interview process usually has 2 rounds. The most common rounds in the Aarvi Encon interview process are One-on-one Round, Resume Shortlist and HR.
What are the top questions asked in Aarvi Encon Field Engineer interview?

Some of the top questions asked at the Aarvi Encon Field Engineer interview -

  1. Trouble shooting in your pl...read more
  2. Plant process rela...read more
  3. Electrical erect...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

INTERVIEWS

Aarvi Encon

No Interviews

LIST OF COMPANIES

Aarvi Encon

Locations

SALARIES

Experis IT

INTERVIEWS

Experis IT

No Interviews

INTERVIEWS

Experis IT

No Interviews

REVIEWS

eTeam

No Reviews

DESIGNATION

SALARIES

Experis IT

Tell us how to improve this page.

Aarvi Encon Field Engineer Interview Process

based on 6 interviews

1 Interview rounds

  • One-on-one Round
View more

Anonymously discuss salaries, work culture, and many more

Get Ambitionbox App

Interview Questions from Similar Companies

Quess Interview Questions
3.9
 • 406 Interviews
Randstad Interview Questions
3.8
 • 259 Interviews
Team Lease Interview Questions
3.9
 • 200 Interviews
Adecco Group Interview Questions
3.7
 • 87 Interviews
ManpowerGroup Interview Questions
3.8
 • 51 Interviews
Iksula Interview Questions
3.5
 • 27 Interviews
Symphoni HR Interview Questions
4.2
 • 20 Interviews
View all
Aarvi Encon Field Engineer Salary
based on 196 salaries
₹3.5 L/yr - ₹5 L/yr
11% more than the average Field Engineer Salary in India
View more details

Aarvi Encon Field Engineer Reviews and Ratings

based on 66 reviews

3.9/5

Rating in categories

3.4

Skill development

3.5

Work-life balance

3.2

Salary

3.1

Job security

3.2

Company culture

2.6

Promotions

3.3

Work satisfaction

Explore 66 Reviews and Ratings
Field Engineer
196 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Engineer
161 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Inspection Engineer
79 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Engineer
76 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Technician
52 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Aarvi Encon with

Quess

3.9
Compare

Team Lease

3.9
Compare

Iksula

3.5
Compare

Randstad

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview