Add office photos
Filter interviews by
Aa Pmc and Engineering Senior Engineer Interview Questions, Process, and Tips
Aa Pmc and Engineering Senior Engineer Interview Experiences
1 interview found
Selected
I applied via Referral and was interviewed before Dec 2023. There was 1 interview round.
(8 Questions)
- Q1. What us finesse modulus.
- Ans.
The finesse modulus is a measure of the ability of a material to resist deformation under load.
The finesse modulus is calculated by dividing the stress required to produce a given strain by the strain itself.
It is commonly used in materials science and engineering to evaluate the stiffness and strength of materials.
Higher finesse modulus values indicate greater resistance to deformation.
For example, a material with a f...
- Q2. Cement quantity in M25 concrete.
- Ans.
The quantity of cement required in M25 concrete mix depends on the ratio of cement to other materials.
The ratio of cement to aggregate to sand in M25 concrete mix is usually 1:1:2
For 1 cubic meter of M25 concrete mix, the quantity of cement required is approximately 350 kg
The quantity of cement can vary based on the specific requirements of the project
- Q3. Percentage of admixture dosage in concrete.
- Ans.
Admixture dosage in concrete is typically between 0.1% to 5% of the total weight of cement used.
Admixture dosage in concrete is usually between 0.1% to 5% of the total weight of cement.
Admixtures are added to concrete to improve its workability, durability, and strength.
Examples of admixtures include water reducers, accelerators, retarders, and air-entraining agents.
- Q4. What are Environmental exposure condition.
- Ans.
Environmental exposure conditions refer to the various factors in the environment that can impact an individual's health and well-being.
Includes factors such as air quality, water quality, noise levels, and presence of hazardous substances
Can also include factors like temperature, humidity, and access to green spaces
Examples: exposure to air pollution from traffic, living near a landfill site, working in a noisy factor
- Q5. Environment exposure condition of delhi.
- Ans.
Delhi's environment exposure condition is characterized by high levels of air pollution, particularly during winter months.
Delhi experiences severe air pollution due to factors such as vehicular emissions, industrial activities, construction dust, and crop burning in neighboring states.
The city often faces smog and poor air quality levels, leading to health issues such as respiratory problems, allergies, and cardiovasc...
- Q6. What is Anti corrosive treatment on reinforcement.
- Ans.
Anti corrosive treatment on reinforcement is a process to protect steel reinforcement from corrosion in concrete structures.
Anti corrosive coatings are applied on the surface of reinforcement bars to prevent corrosion.
Common methods include epoxy coatings, galvanization, and corrosion inhibitors.
These treatments help extend the lifespan of concrete structures and prevent structural damage.
Proper surface preparation is ...
- Q7. What are the role of cover in RCC.
- Ans.
Cover in RCC refers to the thickness of concrete between the outer surface of the reinforcement and the outer surface of the concrete.
Cover protects the reinforcement from corrosion, fire, and other environmental factors.
It helps in preventing the steel bars from coming in contact with moisture and chemicals present in the environment.
Proper cover ensures the durability and strength of the structure.
The required cover ...
- Q8. Batching time of RMC 1 lot.
- Ans.
The batching time for one lot of RMC varies depending on the size of the batch and the equipment used.
Batching time can range from a few minutes to an hour or more.
Factors affecting batching time include batch size, equipment efficiency, and mix design complexity.
For example, a small batch of RMC may only take a few minutes to batch, while a larger batch with complex mix design could take an hour or more.
Top trending discussions
Interview questions from similar companies
I applied via Company Website and was interviewed in Jan 2022. There were 3 interview rounds.
(2 Questions)
- Q1. What is mean by testing
- Ans.
Testing is the process of evaluating a system or component to determine if it satisfies specified requirements.
Testing is done to identify defects or errors in software or hardware.
It involves executing a system or component with the intent of finding bugs or verifying its functionality.
Testing can be performed at various levels such as unit testing, integration testing, system testing, and acceptance testing.
Different...
- Q2. Why we are doing testing
- Ans.
Testing is done to ensure that the software meets the requirements and is of high quality.
To identify defects and errors in the software
To ensure that the software meets the specified requirements
To improve the quality of the software
To increase customer satisfaction
To reduce the risk of software failure
To ensure that the software is reliable and secure
(5 Questions)
- Q1. What are your salary expectations?
- Q2. What is your family background?
- Q3. Share details of your previous job.
- Q4. What are your strengths and weaknesses?
- Q5. Tell me about yourself.
Interview Preparation Tips
Skills evaluated in this interview
(1 Question)
- Q1. What you did to learn new technology?
- Ans.
I keep myself updated by attending conferences, reading blogs, and taking online courses.
Attend conferences and workshops to learn from experts
Read blogs and articles to stay updated on latest trends
Take online courses and tutorials to gain practical knowledge
Experiment with new technology by building projects
Collaborate with peers to learn from their experiences
Interview Preparation Tips
Software Engineer Interview Questions & Answers
Apmosys Technologies
Anonymous
posted on 16 Dec 2024
Selected
I applied via Campus Placement and was interviewed in Nov 2024. There were 2 interview rounds.
The aptitude test was relatively straightforward, consisting of both aptitude and technical questions, with a difficulty level ranging from easy to medium.
(2 Questions)
- Q1. Was asked to write a code on basic DSA concept
- Q2. Then was asked basic questions on DSA and SQL
Interview Preparation Tips
Production Engineer Interview Questions & Answers
ABCI Infrastructures
Anonymous
posted on 16 Oct 2024
(2 Questions)
- Q1. Hajajakakakk sjs skskse sksksjs dd r d r d. E
- Q2. Bsn s s d d d d. S d d. nsnsjsjsjsj
(1 Question)
- Q1. They asked Java coding question
I applied via Company Website and was interviewed in Sep 2024. There were 2 interview rounds.
First round is apti when in placement
Too hard all are dsa questions
Project Engineer Interview Questions & Answers
Demech Chemical Products
Anonymous
posted on 2 Mar 2024
Selected
I applied via Referral and was interviewed in Feb 2024. There was 1 interview round.
(2 Questions)
- Q1. What are the projects handled in previous organisation?
- Q2. What are the, most challenging situation in the projects and How did you handle that ?
Interview Preparation Tips
Selected
I applied via Approached by Company and was interviewed in Feb 2023. There were 4 interview rounds.
If the cost price of an item is Rs. 150 and the selling price is Rs. 200, what is the profit percentage?
(3 Questions)
- Q1. What is the difference between a stack and a queue? Give an example where you would use each.
- Ans.
A stack is a LIFO data structure while a queue is a FIFO data structure.
Stack: Last In First Out (LIFO), used in undo/redo functionality, backtracking, and recursion.
Queue: First In First Out (FIFO), used in job scheduling, breadth-first search, and printing.
Stack uses push() and pop() operations while queue uses enqueue() and dequeue() operations.
- Q2. What is the difference between a compiler and an interpreter?
- Ans.
A compiler translates the entire program into machine code before execution, while an interpreter translates and executes the program line by line.
A compiler converts the source code into an executable file, while an interpreter executes the code directly.
Compilers typically produce faster and more efficient code, while interpreters provide faster development and debugging.
Examples of compilers include GCC, Clang, and ...
- Q3. A compiler is a program that translates the entire source code into machine code before executing it. The source code is fed into the compiler, which analyzes and translates it into an executable file. Thi...
(1 Question)
- Q1. How do you handle stress and pressure?
- Ans.
I handle stress and pressure by practicing time management, seeking support from colleagues, and maintaining a healthy work-life balance.
I prioritize tasks and create a schedule to manage my time effectively.
I communicate with my team and seek their assistance or guidance when needed.
I engage in stress-relieving activities outside of work, such as exercising or spending time with loved ones.
I practice mindfulness and d...
Interview Preparation Tips
- Technical
- Problem Solving
- Communication Skills
Skills evaluated in this interview
I applied via Naukri.com
This is the round in which basic quant questions were asked
In this round basic 2 java questions were asked
In this round one topic was given and we need to discuss about that topic
(2 Questions)
- Q1. What is java explain in detail
- Ans.
Java is a high-level, object-oriented programming language used to develop applications for various platforms.
Java is platform-independent, meaning it can run on any platform with a Java Virtual Machine (JVM)
It is known for its security features, such as the ability to run code in a sandbox environment
Java is used for developing a wide range of applications, from web applications to mobile apps and games
It is also used...
- Q2. What is searching and sorting
- Ans.
Searching is finding a specific item in a collection of items. Sorting is arranging items in a specific order.
Searching involves looking for a specific item in a collection of items.
Sorting involves arranging items in a specific order, such as alphabetical or numerical.
Searching and sorting are commonly used in computer science and data analysis.
Examples of searching algorithms include linear search and binary search.
E...
(1 Question)
- Q1. What is binary tree explain
- Ans.
A binary tree is a data structure consisting of nodes, where each node has at most two children.
Nodes in a binary tree have a left and/or right child node.
The topmost node is called the root node.
Binary trees are used in search algorithms and data compression.
Examples of binary trees include binary search trees and heap trees.
(2 Questions)
- Q1. What is your current location
- Q2. What is your salary expectations
Interview Preparation Tips
- Java
- API
Skills evaluated in this interview
Aa Pmc and Engineering Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Software Engineer Interview Questions
- Senior Software Engineer Interview Questions
- System Engineer Interview Questions
- Quality Engineer Interview Questions
- Design Engineer Interview Questions
- Associate Software Engineer Interview Questions
- QA Engineer Interview Questions
- Data Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
Aa Pmc and Engineering Senior Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Assistant Engineer
9
salaries
|  ₹5 L/yr - ₹7 L/yr |
|
Junior Engineer
5
salaries
| ₹3 L/yr - ₹5 L/yr |
|
Assistant Engineer - Civil
5
salaries
| ₹2 L/yr - ₹5.2 L/yr |
|
Assistant Manager
4
salaries
| ₹9.4 L/yr - ₹12 L/yr |
|
Project Engineer
4
salaries
| ₹7 L/yr - ₹11 L/yr |
Huawei Technologies
HCL Infosystems
ABCI Infrastructures
JioMart
- Home >
- Interviews >
- Aa Pmc and Engineering Interview Questions >
- Aa Pmc and Engineering Senior Engineer Interview Questions
