AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Filter interviews by
Vensphere Technologies Private Limited Interview Questions and Answers
Vensphere Technologies Private Limited Interview Experiences
2 interviews found
Anonymous
I applied via Naukri.com and was interviewed in Sep 2021. There were 2 interview rounds.
(1 Question)
- Q1. Tool Test in Plastic trims design using Catia
- Ans.
Tool testing in Catia for plastic trims design
Catia is a CAD software used for designing and testing
Tool testing involves simulating the manufacturing process to ensure the design is feasible
Plastic trims design requires consideration of material properties and manufacturing constraints
Testing can help identify potential issues and optimize the design for production
Interview Preparation Tips
MOLD Design
Skills evaluated in this interview
Design Engineer Interview Questions asked at other Companies
I applied via Naukri.com and was interviewed in Sep 2021. There were 2 interview rounds.
(1 Question)
- Q1. Tool Test in Plastic trims design using Catia
- Ans.
Tool testing in Catia for plastic trims design
Catia is a CAD software used for designing and testing
Tool testing is important to ensure proper fit and function
Plastic trims design requires consideration of material properties
Simulation can be used to test tool performance and identify potential issues
Interview Preparation Tips
MOLD Design
Skills evaluated in this interview
Design Engineer Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
MARUDHUPANDIYAN D
Interview Questionnaire
1 Question
- Q1. Why do you resigned previous job
- Ans.
Seeking new challenges and opportunities for growth.
Desire for new challenges and opportunities for growth
Seeking a better work-life balance
Company restructuring or downsizing
Relocation to a different city or country
Interview Preparation Tips
Experience: Tell me about your self, I tried to speak him but trigl the words due to fear.
Tips: I think to attend more interview
SAGAR SHAH
Interview Preparation Tips
Experience: CRITERIA:6.5+ CGPANO BACKLOGS
Tips: TRY TO WORK HARD IN THE EARLIER SEMESTERS TO BE ELIGIBLE FOR MOST OF THE COMPANIES.
Round: Test
Experience: 30 TECHNICAL QUESTIONS, PURELY BRANCH SPECIFIC, EASY AND BASIC CONCEPTS WERE ASKED.30 APTITUDE AND ENGLISH QUESTIONS, VERY EASY
Tips: PREPARE TECHNICAL PART WELLPRACTICE APTITUDE AND ENGLISH FROM www.indiabix.comVERY HELPFUL WEBSITE
Duration: 60 minutes
Total Questions: 60
Round: HR Interview
Experience: GENERAL QUESTIONS WERE ASKED:ABOUT MYSELFFAMILY BACKGROUNDSCHOOLING AND ACADEMIC ACHIEVEMENTSABOUT JOINING TCE
Tips: DON'T MANIPULATE THE TRUTH.ANSWER CLEARLY AND CONFIDENTLY.
Round: Technical Interview
Experience: TECHNICAL QUESTIONS RELATED TO ELECTIVE SUBJECTS WERE ASKED.ALSO DESIGN STEPS OF VARIOUS STRUCTURAL ELEMENTS WERE ASKED.
Tips: BE PREPARED. SAY "DON'T KNOW THE ANSWER" INSTEAD OF SPEAKING NONSENSE. ANSWER ONLY WHAT IS ASKED. EXTRA INFO GIVEN BY YOU CAN GET YOU IN UNWANTED TROUBLE!! :P
General Tips: BEST OF LUCK.
Skill Tips: MAIN FOCUS ON THE WAY YOU COMMUNICATE WITH THE INTERVIEWERS IN ENGLISH!!
Skills: COMMUNICATION SKILLS
College Name: NIT SURAT
Motivation: GOOD REPUTATION. IT WAS EXACTLY MATCHING TO THE JOB PROFILE I ASPIRED FOR.TATA GROUP IS A BIG BRAND IN INDIA AND CAN LEAD TO MANY FUTURE BENEFITS IF YOU SERVE THEM FOR CONSIDERABLE AMOUNT OF TIME.
Funny Moments: THEY ASKED ME: "ANY SUGGESTION FOR IMPROVING OUR SELECTION PROCEDURE?"I ANSWERED: "YOU SHOULD CHANGE IT. TEST SHOULD BE ONLINE RATHER THAN BEING OFFLINE i.e. PEN AND PAPER."THEY WERE IMPRESSED AND APPRECIATED IT. :P
Interview Questionnaire
3 Questions
- Q1. Why our company?
- Ans.
Your company's innovative approach to design and engineering aligns with my passion for pushing boundaries and creating impactful solutions.
Your company's reputation for excellence in the industry
The opportunity to work with a talented and diverse team
The chance to work on challenging and exciting projects
The potential for professional growth and development
The company's commitment to sustainability and social responsi
- Q2. What can you offer to our company?
- Ans.
I can offer my expertise in design engineering, strong problem-solving skills, and a passion for innovation.
Expertise in design engineering
Strong problem-solving skills
Passion for innovation
Ability to work collaboratively in a team environment
Experience with CAD software such as SolidWorks and AutoCAD
Familiarity with manufacturing processes and materials
Excellent communication and presentation skills
- Q3. You have a good CG why aren’t you going for higher studies?
- Ans.
I believe that practical experience is equally important as higher studies in my field.
I have gained valuable experience through internships and projects
I am constantly learning and improving my skills through online courses and workshops
I am open to pursuing higher studies in the future if it aligns with my career goals
I believe that hands-on experience is crucial in the design engineering field
Interview Preparation Tips
Experience: Two tests were there. One CAT type questions- maths, quant, verbal Another related to the department. Both were objective type.
Tips: Even without any CAT preparation, you can clear it quite easily. For the department related exam, a basic preparation of core subjects for placements is enough. Most of the questions were CV based. No negative marks, I think. So fill all the questions.
Round: Interview
Experience: It went on for about 20 mins. All were technical questions and most of them were from the things I’ve stated in my CV.
Tips: Write only what you’ve done in your CV, if not at least be prepared to defend everything. Otherwise if you are confident with your basics it should not be a big problem to clear this round.
Round: Interview
Experience: By the time I got till here, I already knew that I almost got placed. So it was very friendly and went on for about 10 minutes.
Skill Tips: Being a core design consultancy, more emphasis was on academic performance. I think a CGPA above 7.5 or 8 is very ideal. They looked deep into my internship and project. Various questions about what I had done there and how well I got practical exposure were tested.
College Name: IIT KHARAGPUR
Interview Questionnaire
1 Question
- Q1. What is PHP
- Ans.
PHP is a server-side scripting language used for web development.
PHP stands for Hypertext Preprocessor.
It is an open-source language.
PHP code is executed on the server, generating HTML which is sent to the client.
It can be embedded into HTML code.
PHP is commonly used for creating dynamic web pages and web applications.
Popular websites like Facebook, Wikipedia, and WordPress are built using PHP.
Interview Preparation Tips
Skills evaluated in this interview
Interview Questionnaire
2 Questions
- Q1. Previous experience and some technical questions in subjects
- Q2. Package
Interview Preparation Tips
Experience: technical skill
tool knowledge
experience
Round: Test
Experience: tool test
I applied via Approached by Company and was interviewed in Nov 2017. There were 4 interview rounds.
Interview Preparation Tips
Experience: Design Engineer
Round: Test
Experience: Tool test in CATIA V5 Software
General Tips: Design basics,
CATIA V5 tool knowledge
Skills: Engineering Drawing, Mechanical Engineering, Design Engineering, Catia
Duration: <1 week
I applied via Referral and was interviewed in Sep 2019. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Current rating of USB used in bus?
- Ans.
The current rating of USB used in a bus varies depending on the USB version.
The USB 1.0 and 2.0 versions have a maximum current rating of 500mA.
The USB 3.0 version has a maximum current rating of 900mA.
The USB 3.1 and 3.2 versions have a maximum current rating of 1.5A.
USB Power Delivery (USB PD) can provide up to 5A of current.
The actual current rating may also depend on the specific USB device and its power requiremen
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Feb 2021. There were 2 interview rounds.
(2 Questions)
- Q1. About college projects
- Q2. Technicals related to it
(4 Questions)
- Q1. What is your family background?
- Q2. Where do you see yourself in 5 years?
- Q3. What are your strengths and weaknesses?
- Q4. Tell me about yourself.
Interview Preparation Tips
- Design considerations
- Tools
Vensphere Technologies Private Limited Interview FAQs
Recently Viewed
SALARIES
R Systems International
LIST OF COMPANIES
NextComm Corporation
Locations
LIST OF COMPANIES
NextGen Healthcare
Locations
LIST OF COMPANIES
Aurionpro Solutions
Locations
LIST OF COMPANIES
Siemens Healthineers
Locations
SALARIES
Access Healthcare
INTERVIEWS
Aksha Engineering & Consultancy
No Interviews
SALARIES
Optimized Solutions
INTERVIEWS
Able Design Engineering Services
No Interviews
SALARIES
Imeg Engineering India
Tell us how to improve this page.
Interview Questions for Popular Designations
- Software Developer Interview Questions
- Senior Associate Interview Questions
- Business Analyst Interview Questions
- Senior Engineer Interview Questions
- Consultant Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Accountant Interview Questions
- Test Engineer Interview Questions
- Show more
Vensphere Technologies Private Limited Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Vensphere Technologies Private Limited Reviews and Ratings
based on 19 reviews
Rating in categories
|
Design Engineer
19
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Junior Design Engineer
4
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Mechanical Engg. Design
3
salaries
| ₹0 L/yr - ₹0 L/yr |
TCS
Infosys
Wipro
HCLTech
- Home >
- Interviews >
- Vensphere Technologies Private Limited Interview Questions
