Filter interviews by
Top trending discussions
I applied via Approached by Company and was interviewed before May 2021. There were 3 interview rounds.
posted on 26 Feb 2022
I applied via AmbitionBox and was interviewed before Feb 2021. There were 2 interview rounds.
Universal coupling is a mechanical device used to connect two shafts at an angle and transmit torque.
Universal coupling is also known as a universal joint or U-joint.
It consists of two yokes connected by a cross-shaped member called a spider.
The spider allows the two yokes to rotate independently of each other while transmitting torque.
Universal couplings are commonly used in automotive drive shafts to accommodate misa...
I was interviewed before Jan 2021.
Diploma
posted on 5 Feb 2024
Pump working principles involve the conversion of mechanical energy into fluid energy to transport fluids.
Pumps use mechanical energy to create pressure and move fluids.
They work based on the principle of fluid dynamics.
Pumps have an inlet and an outlet where fluids enter and exit.
The pump imparts energy to the fluid, increasing its pressure and kinetic energy.
Different types of pumps include centrifugal pumps, recipro...
A valve is a device that controls the flow of fluid or gas by opening, closing, or partially obstructing various passageways.
Valves are used in various industries such as oil and gas, water treatment, power generation, and manufacturing.
There are different types of valves including gate valves, globe valves, ball valves, butterfly valves, and check valves.
Gate valves are used to fully open or close the flow of fluid, w...
A gate valve is a type of valve that uses a gate or wedge-shaped disc to control the flow of fluid.
Gate valves are primarily used to start or stop the flow of fluid in a pipeline.
They have a sliding gate or disc that moves perpendicular to the flow of fluid.
When the gate is fully lifted, the flow is unrestricted, and when it is fully closed, the flow is completely stopped.
Gate valves are commonly used in applications w...
HSD density refers to the density of High-Speed Diesel fuel.
HSD density is the measure of mass per unit volume of High-Speed Diesel fuel.
It is typically expressed in kilograms per liter (kg/L) or grams per milliliter (g/mL).
The density of HSD can vary depending on factors such as temperature and composition.
Knowing the density of HSD is important for various engineering calculations and fuel efficiency analysis.
For exa...
EBMS density refers to the density of the Engineered Biomaterial System used in mechanical engineering.
EBMS density is a measure of the mass per unit volume of the Engineered Biomaterial System.
It is an important parameter in designing and analyzing mechanical components made from EBMS.
EBMS density can vary depending on the composition and structure of the biomaterial.
Higher density materials are generally stronger and...
A nozzle is a device used to control the flow and direction of a fluid or gas.
Nozzles are commonly used in various industries such as aerospace, automotive, and manufacturing.
They are used to accelerate or decelerate fluid flow, create a desired spray pattern, or generate thrust.
Examples of nozzle applications include rocket engines, fuel injectors, spray painting equipment, and fire hoses.
I applied via Company Website and was interviewed in Nov 2021. There were 4 interview rounds.
posted on 28 Oct 2022
Different types of fit include clearance fit, interference fit, and transition fit.
Clearance fit: parts are designed to have a gap between them, allowing for easy assembly and disassembly.
Interference fit: parts are designed to be pressed or forced together, creating a tight and secure fit.
Transition fit: parts have a small amount of overlap, creating a balance between clearance and interference fit.
Examples include pi...
Benson Boiler is the boiler that does not need a steam drum.
Benson Boiler is a high-pressure, drumless, water tube steam boiler
It works on the principle of critical pressure
It is used in thermal power plants for generating power
It has a high thermal efficiency and can handle a wide range of fuel types
Pneumatics is used for its simplicity, reliability, and cost-effectiveness in various applications.
Pneumatic systems are easy to install and maintain.
They are reliable and have a long lifespan.
Pneumatics are cost-effective compared to other systems.
They are used in various applications such as manufacturing, transportation, and construction.
Examples include pneumatic drills, air compressors, and pneumatic cylinders.
Various types of brakes include disc brakes, drum brakes, regenerative brakes, electromagnetic brakes, and hydraulic brakes.
Disc brakes use calipers to squeeze brake pads against a rotor to slow or stop the vehicle.
Drum brakes use shoes that press against the inside of a drum to slow or stop the vehicle.
Regenerative brakes convert kinetic energy into electrical energy to recharge the battery.
Electromagnetic brakes use ...
Sliding contact can be classified based on the type of motion and the nature of the surfaces in contact.
Sliding contact can be classified as sliding, rolling, or twisting contact.
Based on the nature of the surfaces in contact, sliding contact can be classified as dry or lubricated contact.
Examples of sliding contact include the contact between brake pads and rotors, gears in a gearbox, and the contact between a piston ...
I applied via Company Website and was interviewed in Mar 2022. There were 3 interview rounds.
One example of learning from failure is failing to meet a project deadline and using that experience to better estimate future timelines.
Reflect on what went wrong and why
Identify areas for improvement
Develop a plan to address those areas
Apply the lessons learned to future projects
Communicate the lessons learned to team members
Example: Failing to deliver a project on time due to poor communication with stakeholders. Th...
I will prioritize tasks, delegate when necessary, and communicate with my team to ensure efficient workload management.
Create a to-do list and prioritize tasks based on urgency and importance
Delegate tasks to team members based on their strengths and workload
Communicate with team members to ensure everyone is on the same page and workload is evenly distributed
Take breaks and practice self-care to avoid burnout
I applied via Walk-in and was interviewed in Jun 2021. There was 1 interview round.
based on 1 interview
Interview experience
Assistant Manager
262
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Manager
200
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
114
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Officer
41
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
39
salaries
| ₹0 L/yr - ₹0 L/yr |
Hindalco Industries
Tata Steel
JSW Steel
Coal India