AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
VE Commercial Vehicles Assembly Engineer Interview Questions, Process, and Tips
VE Commercial Vehicles Assembly Engineer Interview Experiences
1 interview found
(4 Questions)
- Q1. How goes gears work?
- Ans.
Gears work by transferring motion and power between two rotating shafts through interlocking teeth.
Gears have teeth that mesh together to transmit motion and power
Different gear sizes can change the speed and torque of the output shaft
Common types of gears include spur gears, helical gears, and bevel gears
- Q2. Type of gears and it's uses?
- Ans.
Types of gears include spur gears, helical gears, bevel gears, and worm gears, each with specific uses in various mechanical systems.
Spur gears: used in applications requiring high speed and low noise, such as in washing machines
Helical gears: provide smoother operation and higher load capacity, commonly found in automotive transmissions
Bevel gears: used to transmit motion between intersecting shafts, like in hand dril...
- Q3. What's is primary axis of circle.
- Ans.
The primary axis of a circle is the line passing through the center of the circle and dividing it into two equal halves.
The primary axis of a circle is also known as the diameter.
It is the longest chord that can be drawn in a circle.
The length of the primary axis is twice the radius of the circle.
The primary axis is a line of symmetry for the circle.
- Q4. Type of gear meshing.
- Ans.
Gear meshing can be classified as spur, helical, bevel, worm, etc.
Spur gears have straight teeth and are used for parallel shafts
Helical gears have angled teeth for smoother operation
Bevel gears are used for intersecting shafts
Worm gears have a screw-like appearance for high torque applications
Top trending discussions
Interview questions from similar companies
(2 Questions)
- Q1. Line engineering
- Q2. Menpawar Hendaling
(2 Questions)
- Q1. New model Development
- Q2. Special tools trial
(2 Questions)
- Q1. Vender management
- Q2. Dispatch planing
Interview Preparation Tips
Assembly Engineer Interview Questions & Answers
Tata Motors
Abhishek Chaudhary
posted on 18 Jan 2025
(5 Questions)
- Q1. My name is Abhishek
- Q2. My village name Panditpur
- Q3. My district Gorakhpur
- Q4. My state Uttar Pradesh
- Q5. My job experience technical assembly in electrical field
Assistant Manager Interview Questions & Answers
Honda Motorcycle & Scooter
Anonymous
posted on 28 Aug 2022
I applied via Approached by Company and was interviewed before Aug 2021. There were 5 interview rounds.
General aptitude, basic technical questions
(1 Question)
- Q1. Detailed technical round focussing on technical knowledge & implementation in previous job roles
(1 Question)
- Q1. Discussion with operation head regarding why I am a fit for this role?
(1 Question)
- Q1. What should i expect with this job & what will be my responsibilities.
(1 Question)
- Q1. Physical, mental & emotional health check
Interview Preparation Tips
Assistant Manager Interview Questions & Answers
Honda Motorcycle & Scooter
Anonymous
posted on 25 Jan 2021
I applied via Naukri.com and was interviewed before Jan 2020. There was 1 interview round.
Interview Questionnaire
5 Questions
- Q1. Expected Salary
- Q2. Married or Single
- Q3. Single
- Q4. No, of years in Maharashtra
- Ans.
I have lived in Maharashtra for 5 years.
I have lived in Mumbai, Pune, and Nagpur.
During my time in Maharashtra, I worked as a Sales Manager for a retail company.
I am familiar with the local culture, language, and business practices.
- Q5. 40 yrs
Interview Preparation Tips
Assistant Manager Interview Questions & Answers
Hyundai Motor India Limited
Anonymous
posted on 25 Nov 2021
I applied via Campus Placement and was interviewed before Nov 2020. There were 7 interview rounds.
Interview Questionnaire
1 Question
- Q1. Question include about automobile parts and principles in technical interview and situation based questions in HR interview
Interview Preparation Tips
1. Aptitude / verbal test
2. Group Discussion
3. PowerPoint presentation
4. Technical interview
5. HR interview
6. Stress management ( optional)
1. APTITUDE:
Questions will be generally from Amcat, which would be easy to crack. It is recommended to have a basic knowledge on all the formulas used to quickly solve the questions to keep up with time
2. GROUP DISCUSSION:
Initiate the discussion and give them the invigilators the opinion that you are confident and bold enough and you are good to go.
3. POWERPOINT PRESENTATION:
Explain about oneself in 4 slides. It should not include anything related to your academics. Include SWOT in your presentation.
4. TECHNICAL INTERVIEW:
a. Be strong with the basics of automobile parts and principles.
b. One should have good command over the areas of interest mentioned in the resume.
5. HR interview:
Again be honest and don't twist the words. Be confident and voice out your decision making skills when you are given a situation based question, which the HRs often do.
This would be enough for you to crack the interview.
In Simple words it would be challenging.
Interview Questionnaire
1 Question
- Q1. Wt is your goal in your life?
Interview Questionnaire
2 Questions
- Q1. What do you mean by CFMEA?
- Ans.
CFMEA stands for Control Failure Mode and Effects Analysis.
CFMEA is a systematic approach used to identify and mitigate potential failures in a process or system.
It involves analyzing failure modes, their causes, and the potential effects on the process or system.
CFMEA helps in prioritizing and implementing control measures to prevent or minimize failures.
It is commonly used in industries such as manufacturing, automot...
- Q2. Is system level or component level DFMEA given main preference?
- Ans.
System level DFMEA is given main preference.
System level DFMEA considers the entire system and its interactions.
Component level DFMEA focuses on individual components.
System level DFMEA is more comprehensive and effective in identifying potential failures.
Example: In automotive industry, system level DFMEA would consider the entire vehicle and its subsystems.
Example: In medical devices, system level DFMEA would conside...
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed before Dec 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. What improvements you did in your last company ?
Interview Preparation Tips
I applied via Campus Placement and was interviewed before Jun 2021. There were 2 interview rounds.
Basic aptitude test, with basic knowledge of all your domain subjects.
If you are preparing for gate then it will be easy to clear for you.
(5 Questions)
- Q1. Tell me something about yourself.
- Q2. What makes you different from others.
- Q3. Give a practical example of cantilever beam.
- Ans.
A cantilever beam is a beam that is supported at only one end and carries a load at the other end.
A diving board is a practical example of a cantilever beam.
A shelf attached to a wall with brackets is another example.
A flagpole is also a cantilever beam.
Cantilever bridges are another example of cantilever beams.
Cantilever beams are used in construction to support balconies and overhangs.
- Q4. Why do you want to join this organisation?
- Q5. Some questions about my past internships and my projects.
Interview Preparation Tips
All the best👍
VE Commercial Vehicles Interview FAQs
Tell us how to improve this page.
VE Commercial Vehicles Interviews By Designations
- VE Commercial Vehicles Deputy Manager Interview Questions
- VE Commercial Vehicles Junior Manager Interview Questions
- VE Commercial Vehicles Assistant Manager Interview Questions
- VE Commercial Vehicles Quality Engineer Interview Questions
- VE Commercial Vehicles Management Trainee Interview Questions
- VE Commercial Vehicles Channel Sales Manager Interview Questions
- VE Commercial Vehicles Junior Manager 2 Interview Questions
- VE Commercial Vehicles Warranty Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Assembly Operator Interview Questions
- Assembly Fitter Interview Questions
- Assembly Production Engineer Interview Questions
- Assembly Technician Interview Questions
- Assembly Supervisor Interview Questions
- Assembler Interview Questions
- Assembly Production Interview Questions
- Assembly Line Operator Interview Questions
- Show more
VE Commercial Vehicles Assembly Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
|
Junior Manager
1.5k
salaries
|  ₹2.2 L/yr - ₹8.4 L/yr |
|
Deputy Manager
1.3k
salaries
| ₹6.3 L/yr - ₹19.5 L/yr |
|
Assistant Manager
955
salaries
| ₹3.8 L/yr - ₹10.9 L/yr |
|
Manager
245
salaries
| ₹10 L/yr - ₹28 L/yr |
|
Service Engineer
235
salaries
| ₹2.4 L/yr - ₹6.9 L/yr |
Tata Motors
Maruti Suzuki
Ashok Leyland
Hyundai Motor India Limited
- Home >
- Interviews >
- VE Commercial Vehicles Interview Questions >
- VE Commercial Vehicles Assembly Engineer Interview Questions
