Upload Button Icon Add office photos

Filter interviews by

Varsha Forgings Interview Questions and Answers

Updated 6 Apr 2021

Varsha Forgings Interview Experiences

Popular Designations

3 interviews found

I applied via Walk-in

Interview Questionnaire 

1 Question

  • Q1. Technical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared technically.

Senior Engineer Interview Questions asked at other Companies

Q1. what is the meaning of M in M20,M25,M30 grade of concrete?
View answer (58)

Interview Questionnaire 

1 Question

  • Q1. Which are 7 QC tool?
  • Ans. 

    The 7 QC tools are a set of basic statistical tools used for quality control and process improvement.

    • Check sheet: Used to collect and organize data for analysis.

    • Histogram: Represents data distribution and helps identify patterns.

    • Pareto chart: Shows the frequency of problems in descending order to prioritize improvement efforts.

    • Cause-and-effect diagram (Fishbone diagram): Identifies potential causes of a problem.

    • Scatter...

  • Answered by AI

Process Quality Engineer Interview Questions asked at other Companies

Q1. What is process quality control and how to manage line quality
View answer (1)

I applied via Referral and was interviewed before Apr 2020. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. What is the list count of micrometer
  • Ans. 

    The list count of micrometer depends on the type and model of the micrometer.

    • The list count of micrometer refers to the number of divisions on the thimble or sleeve of the micrometer.

    • Different types and models of micrometers have different list counts.

    • For example, a standard outside micrometer typically has a list count of 40, while a digital micrometer may have a list count of 0.001mm.

    • The list count is important for d...

  • Answered by AI
  • Q2. What is quality
  • Ans. 

    Quality is meeting or exceeding customer expectations through consistent and reliable products or services.

    • Quality is a measure of how well a product or service meets customer needs and expectations.

    • It involves consistent and reliable performance, meeting specifications and standards.

    • Quality can be achieved through effective processes, continuous improvement, and customer feedback.

    • Examples of quality include products t...

  • Answered by AI
  • Q3. What is the formula for micrometer list count
  • Ans. 

    Micrometer list count formula is the number of divisions on the micrometer scale multiplied by the value of one division.

    • The formula is: Micrometer list count = Number of divisions on the micrometer scale x Value of one division

    • The micrometer list count is used to measure the thickness or diameter of small objects

    • For example, if the micrometer scale has 50 divisions and the value of one division is 0.01mm, then the mic

  • Answered by AI
  • Q4. What is list count of vernier caliper
  • Ans. 

    The list count of a vernier caliper is typically 20 or 50.

    • The list count refers to the number of divisions on the vernier scale.

    • A 20-count vernier caliper has 19 divisions on the scale, while a 50-count has 49 divisions.

    • The list count determines the precision of the caliper's measurements.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - It was very nice

Skills evaluated in this interview

Senior Quality Engineer Interview Questions asked at other Companies

Q1. what is least count of vernier caliper ,micrometer, height gauge?
View answer (13)

Interview questions from similar companies

Interview Questionnaire 

9 Questions

  • Q1. Your Dream
  • Ans. 

    My dream is to create innovative software solutions that positively impact people's lives.

    • Developing cutting-edge technology

    • Solving complex problems

    • Improving user experience

    • Collaborating with talented individuals

    • Making a difference in society

  • Answered by AI
  • Q2. WHy you want to join this orgainsation
  • Ans. 

    I am excited to join this organization because of its reputation for innovation and commitment to employee growth.

    • I am impressed by the company's track record of developing cutting-edge software solutions.

    • I am excited about the opportunity to work with a team of talented and motivated engineers.

    • I appreciate the company's focus on employee development and growth.

    • I am drawn to the company's culture of innovation and coll...

  • Answered by AI
  • Q3. How much can you work with this organisation
  • Ans. 

    I am willing to work full-time with this organization and put in extra hours if required.

    • I am committed to delivering quality work within deadlines

    • I am open to working overtime and on weekends if necessary

    • I am willing to take on additional responsibilities if needed

  • Answered by AI
  • Q4. About your family
  • Q5. Firstly about yourself
  • Q6. Strengths , weakness
  • Q7. Basic C questions . Difference between structure and union
  • Q8. How can we attach one variable from one file to another
  • Ans. 

    To attach one variable from one file to another, we can use import or require statements in programming languages.

    • In JavaScript, we can use the 'require' statement to import a variable from another file.

    • In Python, we can use the 'import' statement to import a variable from another file.

    • We can also use the 'export' statement in the source file to export the variable and then import it in the destination file.

    • The syntax ...

  • Answered by AI
  • Q9. Where will you think about yourself after 3 years i this organisation

Interview Preparation Tips

Round: Test
Experience: First round of written test is of aptitute and data analysis  . questions are easy 30 questions in 40 . Be fast as time is less.
second round of written test consists of all other section each section involves 15 questions . 
Questions are easy  just go through your syllabus , course books  nothing special . 
If you are preparing for GATE will be really beneficial  .  
for C go trough Depth in C  . very basic questions asked for it.
for MATLAB learn the basic determinant rules questions involved that  .  Only basic of MATLAB  no image processing or higher level programming ..
Tips: attempt ass many as questions .. Try to attempt  all sections  . If you are strong in programming make do attempt C and MATLAB portion  . as there is post for software department also  in organisation .   Main department is the core department  for that do attempt other portions  .
Duration: 120 minutes

Round: Resume Shortlist
Experience: They are not gonna to see your certificates  , They are even not much interested in your CGPA . 
If your CGPA is low you should have an accurate reason for that if they ask .
Tips: Your Resume should be Short and Compact  . Don't make it too large . 1 , 1.5 pages  will be enough  .
the thing which you want to show to HR majorly in your RESUME should be keep at  upper portion , it can be your qualification   , your achievements(IIT rank , KVPY etc.)  or whatever you feels sholud be on top.  you should have deep knowledge about your projects and internship . Each and every thing thing written in your RESUME should be clear to you  and able to explain to them .

Round: Group Discussion
Experience: Easy not much stress .
Tips: Be confident  . try to give your different point of view of a particiular thing  .  don't stop suddenly while saying anything .
Duration: 120 minutes

Round: Problem Statement
Experience: not a easy question as i am not able to give accurate answer. 
HR will give some time to solve the problem .
Tips: Try to give answer.  even if you don't know try to give different explanation for it  . give 3-4 different explanations.  always trying to solve the question .

Round: HR Interview
Experience: little bit tough . Your anwer should be different . it should not be copied from somewhere .
depends on how you know yourself.
Tips: Have smile on your face . Give all answer with smile . don't hesitate . Give each and  every answer . 
be fluent . let the HR complete the question and then answer.

Round: Technical Interview
Tips: go through depth  in C .  knows the basic concept of each chapter .  give complete explanation .  be accurate .

General Tips: Be confident and smile on your face .
Skills: C , EDC, MATLAB, Control system
College Name: NIT BHOPAL
Motivation: good work culture . easy job . not much work stress      .  nice wore location .
good seniors review . Also have chance to go abroad  in early days .
Funny Moments: HR had taken about  90% interview while thing me as other student , as he didn't took my RESUME .  by in the last he told the wrong name . I made correction to him by saying that sorry sir it's my mistake that i haven't give you my RESUME  . but actually he hasn't took my RESUME  . means i admire my mistake infact its his mistake  .
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Technical

Round 3 - HR 

(3 Questions)

  • Q1. Tell me about yourself.
  • Q2. What is your current CTC
  • Q3. No any other interview

Interview Preparation Tips

Interview preparation tips for other job seekers - Dear sir please arrange interview in car manufacturing company on top priority .
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Project experience and acheivements
Round 3 - Technical 

(1 Question)

  • Q1. Managerial skills and handling of team
Round 4 - HR 

(1 Question)

  • Q1. Union handling and pressure handling

Interview Preparation Tips

Interview preparation tips for other job seekers - Need to be patient and innovative with positive approach and self motivation

I applied via Campus Placement and was interviewed in Nov 2020. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. About the general topics of mechanical engineering mainly Tools and Die, Designing, sheet metal, tool room, press shop, automobile.
  • Q2. What is Die and how many types of dies are there?
  • Ans. 

    A die is a tool used to shape or cut materials. There are various types of dies used in different industries.

    • Dies are used in manufacturing to cut, shape, or form materials such as metal, plastic, and paper.

    • Some common types of dies include cutting dies, forming dies, and drawing dies.

    • Cutting dies are used to cut materials into specific shapes, while forming dies are used to bend or shape materials.

    • Drawing dies are use...

  • Answered by AI
  • Q3. What is Tool room in a company?
  • Ans. 

    Tool room is a specialized area in a company where tools and equipment are designed, manufactured, and maintained.

    • Tool room is responsible for designing and manufacturing tools and equipment required for production.

    • It also maintains and repairs the tools and equipment to ensure their longevity and efficiency.

    • Tool room is equipped with specialized machinery and skilled personnel to carry out the tasks efficiently.

    • It pla...

  • Answered by AI
  • Q4. How Designing of any component is helpful before it's manufacturing?
  • Ans. 

    Designing of a component before manufacturing helps in identifying and resolving potential issues, reducing costs and improving efficiency.

    • Designing helps in identifying potential issues and resolving them before manufacturing.

    • It helps in reducing costs by identifying and rectifying errors early on.

    • Designing also helps in improving efficiency by optimizing the component's design.

    • It ensures that the final product meets ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be aware of general topics of Mechanical engineering

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Referral and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

General knowledge, reasoning and english

Round 2 - One-on-one 

(1 Question)

  • Q1. Projects and internship

Interview Preparation Tips

Interview preparation tips for other job seekers - be simple and answer according to related questions.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview in Dec 2023.

Round 1 - HR 

(1 Question)

  • Q1. Past experiences & qualification , job flexibility
Round 2 - Technical 

(1 Question)

  • Q1. Tool room related
Round 3 - Aptitude Test 

Reasoning, enlish , appitude

Round 4 - One-on-one 

(1 Question)

  • Q1. Job leave resonal , future planing
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
4-6 weeks
Result
No response

I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Good not so hard
  • Q2. Tell me about ur self

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

Varsha Forgings Interview FAQs

How to prepare for Varsha Forgings interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Varsha Forgings. The most common topics and skills that interviewers at Varsha Forgings expect are CNC Maintenance, Electrical Maintenance, Internal Audit, MRM and Machine Maintenance.
What are the top questions asked in Varsha Forgings interview?

Some of the top questions asked at the Varsha Forgings interview -

  1. What is the list count of microme...read more
  2. What is the formula for micrometer list co...read more
  3. What is list count of vernier cali...read more

Tell us how to improve this page.

Varsha Forgings Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

UNO Minda Interview Questions
4.0
 • 170 Interviews
Bharat Forge Interview Questions
3.9
 • 55 Interviews
Marelli Interview Questions
3.6
 • 36 Interviews
View all

Varsha Forgings Reviews and Ratings

based on 28 reviews

3.8/5

Rating in categories

4.0

Skill development

3.9

Work-life balance

3.5

Salary

4.0

Job security

3.9

Company culture

3.7

Promotions

3.7

Work satisfaction

Explore 28 Reviews and Ratings
Quality Engineer
11 salaries
unlock blur

₹2.1 L/yr - ₹3 L/yr

Production Supervisor
6 salaries
unlock blur

₹2 L/yr - ₹3 L/yr

Store Executive
6 salaries
unlock blur

₹2.5 L/yr - ₹4.3 L/yr

Senior Production Engineer
5 salaries
unlock blur

₹3.5 L/yr - ₹6 L/yr

CNC Operator
5 salaries
unlock blur

₹1.4 L/yr - ₹2 L/yr

Explore more salaries
Compare Varsha Forgings with

Caparo Engineering India

4.0
Compare

Marelli

3.6
Compare

Enco Engineers Combine

3.5
Compare

Seoyon E-hwa Automotive

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview