AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
i
Valvoline Cummins
Compare
Filter interviews by
Valvoline Cummins Filling Machine Operator Interview Questions and Answers
Valvoline Cummins Filling Machine Operator Interview Experiences
1 interview found
Anonymous
I applied via Campus Placement and was interviewed before Mar 2021. There were 2 interview rounds.
Interview Preparation Tips
- Technical Skills
- Fitter
Practice (Out Loud!) ...
Share Your Story. ...
Provide Evidence & Data. ...
Mirror the Interviewer's Style. ...
Prepare a Few Questions. ...
Ask if They Have Any Hesitations. ...
Say Thanks.
Top trending discussions
Interview questions from similar companies
I applied via Recruitment Consultant and was interviewed before Dec 2018. There were 3 interview rounds.
Interview Questionnaire
11 Questions
- Q1. Phase in APQP, when submit PPAP
- Ans.
PPAP submission is the final phase of APQP.
PPAP submission is the final step in the APQP process.
It involves submitting a Production Part Approval Process (PPAP) to the customer.
PPAP includes documentation and samples that demonstrate the product meets customer requirements.
PPAP submission is necessary before production can begin.
PPAP submission is a critical step in ensuring product quality and customer satisfaction.
- Q2. Five phase in APQP, PPAP is submitted in 4th phase
- Ans.
APQP consists of five phases, with PPAP being submitted in the fourth phase.
APQP stands for Advanced Product Quality Planning.
The five phases of APQP are: Planning and Program Definition, Product Design and Development, Process Design and Development, Product and Process Validation, and Launch, Feedback, Assessment, and Corrective Action.
PPAP stands for Production Part Approval Process.
PPAP is submitted in the fourth p...
- Q3. How to make PPT
- Ans.
To make a PPT, use a software like PowerPoint or Google Slides and follow a structure with clear and concise content.
Choose a template or create your own design
Add relevant and visually appealing images
Use bullet points and short sentences
Practice your presentation before presenting
Include a conclusion and call to action
- Q4. How to do process audit
- Ans.
Process audit involves reviewing and evaluating a company's procedures and policies to ensure they are effective and efficient.
Identify the process to be audited
Define the audit objectives and scope
Select the audit team and assign roles
Gather and analyze data
Identify areas for improvement
Develop and implement corrective actions
Monitor and follow up on corrective actions
Document the audit findings and recommendations
- Q5. As per control plan
- Q6. What you do when a customer complaint
- Ans.
When a customer complaint arises, I listen attentively, empathize with their concerns, investigate the issue, propose a solution, and follow up to ensure satisfaction.
Listen attentively to the customer's complaint
Empathize with their concerns and show understanding
Investigate the issue by gathering relevant information
Propose a solution or offer alternatives to address the complaint
Follow up with the customer to ensure
- Q7. First I will take entrim action as well as I inform to my team & related department via mail or by face.
- Q8. How
- Ans.
Can you please clarify the question?
I'm sorry, I don't understand what you're asking.
Could you please rephrase the question?
I need more information to answer that question.
- Q9. First I depute someone at customer line then customer store, then warehouse if any, then our FG, then WIP & store if problem related to BOP part
- Q10. How & when to develop gauge & fixture during NPD
- Ans.
Gauges and fixtures should be developed during the design phase of NPD to ensure quality and efficiency.
Identify critical dimensions and tolerances early on
Develop gauges and fixtures to measure and verify these dimensions
Test and refine gauges and fixtures throughout the design process
Ensure gauges and fixtures are compatible with manufacturing processes
Finalize gauges and fixtures before production begins
- Q11. During 2nd phase, first I identify gauge or fixture required for which station, if there is inhouse facility then fix meeting for understanding concept to toolroom if not possible to meke inhouse than cal...
Interview Preparation Tips
Clean Nails or cutted properly.
Reach at interview sight 10 to 15 minutes before scheduled time.
Eye contact.
No any hesitation.
Switch off your mobile etc
Selected
I appeared for an interview before Feb 2024.
(3 Questions)
- Q1. What is your perspective on Daily Routine Management (DRM)?
- Ans.
Daily Routine Management (DRM) optimizes productivity by structuring daily tasks and priorities effectively.
Establishing clear goals: Setting daily, weekly, and monthly objectives helps maintain focus.
Time blocking: Allocating specific time slots for tasks can enhance concentration and efficiency.
Prioritization: Using methods like the Eisenhower Matrix to distinguish between urgent and important tasks.
Regular reviews: ...
- Q2. How do you address new process development, and what procedures do you follow?
- Ans.
I follow a structured approach to new process development, ensuring thorough analysis, testing, and implementation.
Conduct a needs assessment to identify the problem or opportunity for improvement.
Research existing processes and technologies to gather insights and best practices.
Develop a detailed project plan outlining objectives, timelines, and resources required.
Prototype the new process and conduct pilot testing to...
- Q3. What is the process for conducting a Process Failure Mode and Effects Analysis (PFMEA)?
- Ans.
PFMEA is a systematic approach to identify and mitigate potential process failures and their effects.
1. Define the scope: Identify the process to be analyzed, such as assembly or manufacturing.
2. Assemble a team: Include cross-functional members like engineers, quality, and production staff.
3. Identify potential failure modes: List ways the process could fail, e.g., incorrect assembly.
4. Determine effects of failures: ...
(2 Questions)
- Q1. What is lean manufacturing 7qc tools What is machine efficiency how calculate, what is OEE and how can increase productivity and minimize product cost
- Ans.
Lean manufacturing is a systematic approach to minimize waste and maximize value in production processes.
Lean manufacturing aims to eliminate waste, such as overproduction, waiting time, and defects.
It focuses on continuous improvement and involves all employees in identifying and solving problems.
The 7QC tools are a set of quality control tools used in lean manufacturing, including Pareto charts, cause-and-effect diag...
- Q2. Please see above questions
Interview Preparation Tips
(1 Question)
- Q1. Blow moulding process
(1 Question)
- Q1. Hame only blow molding Jana hai
Interview Preparation Tips
I applied via Referral and was interviewed in Jul 2021. There were 4 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Is any mnc company having vacancy
- Q2. Is this good company
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed before Sep 2023. There were 2 interview rounds.
Math electrical related
(2 Questions)
- Q1. Family question
- Q2. Job related and
(1 Question)
- Q1. Why you left your current company
(2 Questions)
- Q1. About quality tools & process atc
- Q2. 7qc took, paqcs, process
Interview Preparation Tips
I applied via Walk-in and was interviewed in Aug 2021. There were 5 interview rounds.
Interview Questionnaire
1 Question
- Q1. G code & M code , what is m29& it's benefits? Drill and tap program,hole dialing etc.
- Ans.
M29 is a G-code used to stop writing to an SD card or other storage device.
M29 is used to end a file when writing to an SD card or other storage device.
It ensures that all data is written and prevents corruption of the file.
It is commonly used in CNC machines for drilling and tapping programs.
It can also be used for hole dialing and other precision operations.
M29 is often used in conjunction with other G and M codes to
Interview Preparation Tips
Interview Questionnaire
2 Questions
- Q1. How many types of offset in cnc
- Ans.
There are typically three types of offset in CNC: tool length, cutter radius, and workpiece origin.
Tool length offset compensates for the length of the tool.
Cutter radius offset compensates for the radius of the cutting tool.
Workpiece origin offset sets the origin point for the CNC machine to begin cutting.
Other types of offset may include fixture offsets and wear offsets.
- Q2. How to enter offset 15micron in dia less
- Ans.
To enter offset 15micron in dia less, use the G10 command and specify the offset value.
Use the G10 command to enter the offset value
Specify the offset value as 15micron in dia less
Make sure to save the offset value using the G54-G59 commands
Verify the offset value using the G54.1-G59.3 commands
Valvoline Cummins Interview FAQs
Tell us how to improve this page.
Valvoline Cummins Interviews By Designations
- Valvoline Cummins Territory Manager Interview Questions
- Valvoline Cummins Production Manager Interview Questions
- Valvoline Cummins Business Development Executive Interview Questions
- Valvoline Cummins Business Manager Interview Questions
- Valvoline Cummins Territory Sales Manager Interview Questions
- Valvoline Cummins Warehouse Incharge Interview Questions
- Valvoline Cummins Filling Machine Operator Interview Questions
- Valvoline Cummins Assistant Manager- HR Interview Questions
- Show more
Interview Questions for Popular Designations
- Operator Interview Questions
- Technician Interview Questions
- Electrical Technician Interview Questions
- Diploma Mechanical Engineer Interview Questions
- Diploma Electrical Engineer Interview Questions
- Production Interview Questions
- Mechanical Technician Interview Questions
- Machine Operator Interview Questions
- Show more
Interview Questions from Similar Companies
Valvoline Cummins Filling Machine Operator Reviews and Ratings
based on 4 reviews
Rating in categories
|
Assistant Territory Manager
48
salaries
|  ₹6.7 L/yr - ₹10.1 L/yr |
|
Business Executive
45
salaries
| ₹3.9 L/yr - ₹7.4 L/yr |
|
Business Manager
33
salaries
| ₹10.5 L/yr - ₹18.3 L/yr |
|
Territory Manager
31
salaries
| ₹8.2 L/yr - ₹13.5 L/yr |
|
Channel Account Manager
29
salaries
| ₹6.5 L/yr - ₹18.2 L/yr |
Ag Industries
Toyoda Gosei Minda
Global Autotech
Mikuni
- Home >
- Interviews >
- Valvoline Cummins Interview Questions >
- Valvoline Cummins Filling Machine Operator Interview Questions
