AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
i
USV
Compare
Filter interviews by
USV Mechanical Technician Interview Questions and Answers
USV Mechanical Technician Interview Experiences
1 interview found
Kavya geendkar
(1 Question)
- Q1. Troubleshooting in cartonator
Behevior is verry wrost
Interview questions from similar companies
Anonymous
I appeared for an interview in Aug 2017.
Interview Questionnaire
6 Questions
- Q1. What is the calibration
- Ans.
Calibration is the process of adjusting or verifying the accuracy of a measuring instrument or device.
Calibration ensures that measurements taken by an instrument are accurate and reliable.
It involves comparing the measurements of a device to a known standard.
Calibration may involve adjusting the device to bring it in line with the standard.
It is important in various fields like engineering, manufacturing, and scientif...
- Q2. How to the calibration temperature indicators
- Ans.
Calibrating temperature indicators involves adjusting them to ensure accurate readings.
Calibration of temperature indicators involves comparing their readings to a known standard.
Adjustments are made to the indicators to align their readings with the standard.
Calibration may involve adjusting the zero point and span of the indicators.
Examples of temperature indicators include thermometers, temperature sensors, and temp
- Q3. How to the calibration of rtds
- Ans.
Calibration of RTDs involves comparing the sensor's output to a known reference and adjusting it accordingly.
RTDs (Resistance Temperature Detectors) are calibrated to ensure accurate temperature measurements.
Calibration involves comparing the RTD's resistance values at different temperatures to a known reference.
Adjustments are made to the RTD's output signal to align it with the reference values.
Calibration can be don...
- Q4. How many types of flow meters
- Ans.
There are several types of flow meters used in various industries to measure the flow rate of fluids or gases.
Some common types of flow meters include electromagnetic flow meters, ultrasonic flow meters, turbine flow meters, and positive displacement flow meters.
Electromagnetic flow meters use Faraday's law of electromagnetic induction to measure the flow rate of conductive fluids.
Ultrasonic flow meters utilize ultraso...
- Q5. How to checking the door inter lock systems
- Ans.
To check door interlock systems, inspect the physical components, test the electrical connections, and verify proper functioning.
Inspect the door hinges, latches, and locks for any damage or misalignment.
Check the wiring connections and ensure they are secure and not damaged.
Test the interlock switch by opening and closing the door to see if it activates properly.
Verify that the interlock system prevents the door from ...
- Q6. How to the calibrate pressure gauges,vacuum gauges,compound gauges,
- Ans.
To calibrate pressure gauges, vacuum gauges, and compound gauges, follow these steps:
Use a known reference pressure source to compare the readings of the gauges.
Adjust the gauges if there is any deviation from the reference pressure.
Repeat the process multiple times to ensure accuracy.
Document the calibration process and results for future reference.
Perform regular calibrations to maintain accuracy.
Example: For pressur...
Interview Preparation Tips
(1 Question)
- Q1. What is your current salary. what is your expectation
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed before May 2022. There were 4 interview rounds.
(1 Question)
- Q1. About titration, kf, potentimeter, ir, uv, chemical molecular formula, calibration of ir, uv, kf, potentimeter and pH meter etc.
Technician questions on lab instruments like as pH meter, ir, uv, kf, hplc, titration and autotitrator etc
(1 Question)
- Q1. About yourself and family background etc.
Interview Preparation Tips
- Ir spectroscopy
- UV Spectroscopy
- Auto titrator
- Karl Fischer Titrator
- HPLC
- Titration
Assistant Manager Interview Questions & Answers
Micro Labs
sunilkumar anumalasetty
posted on 19 Dec 2019
I applied via Referral and was interviewed before Dec 2018. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. How many types of ICH guidance s
- Q2. What is the Ich limit for methanol and class of solvent
- Ans.
The Ich limit for methanol is 0.6% and it is classified as a class 3 solvent.
The Ich limit for methanol refers to the maximum allowable amount of methanol in a pharmaceutical product.
The Ich limit for methanol is set at 0.6%, meaning that the concentration of methanol should not exceed 0.6% in the product.
Methanol is classified as a class 3 solvent according to the International Council for Harmonisation of Technical R...
- Q3. What is the specification limit for known impurities and unknown impurities and which guideline explains
- Ans.
The specification limit for known and unknown impurities varies depending on the specific substance being tested.
The specification limit for known impurities is typically set by regulatory agencies or pharmacopoeias.
For example, the United States Pharmacopeia (USP) sets limits for known impurities in pharmaceutical substances.
The specification limit for unknown impurities is usually determined through method validation...
Interview Preparation Tips
I applied via Approached by Company and was interviewed before Jun 2021. There were 2 interview rounds.
(1 Question)
- Q1. Technical and Managerial skill
Interview Preparation Tips
Process skills
I appeared for an interview in Nov 2020.
Interview Questionnaire
1 Question
- Q1. 1. Complete P2P Cycle
- Ans.
P2P cycle refers to the process of procuring goods or services from a supplier and making payments for them.
The cycle starts with identifying the need for goods or services.
The next step is to create a purchase order (PO) and send it to the supplier.
The supplier then delivers the goods or services and sends an invoice to the buyer.
The buyer verifies the invoice and matches it with the PO and goods received.
If everythin...
Interview Preparation Tips
Skills evaluated in this interview
Selected
I applied via Walk-in and was interviewed before Nov 2022. There was 1 interview round.
(6 Questions)
- Q1. How many years work with our organisation
- Q2. How to work with our company and How to improve our company
- Q3. Your flexibility
- Ans.
I am highly adaptable and able to quickly adjust to new situations and challenges.
I have experience working on a variety of projects with different requirements and constraints.
I am able to switch between different tasks and priorities efficiently.
I am open to learning new skills and technologies to stay current in the field.
I can easily collaborate with team members from diverse backgrounds and disciplines.
I am comfor...
- Q4. Your old company contribution
- Ans.
I led a team in developing a new product line, increasing company revenue by 20%.
Led a team in developing a new product line
Increased company revenue by 20%
Implemented cost-saving measures in production process
- Q5. Whey leave old company
- Q6. Why did you choose my company
Interview Preparation Tips
- Your mechanical engineers
Selected
I applied via Referral and was interviewed before Sep 2022. There were 3 interview rounds.
(1 Question)
- Q1. Basic instrumentation working principles. Basic and detail engineering
(1 Question)
- Q1. Availability for site work
- Ans.
I am available for site work and can adjust my schedule as needed.
I am flexible with my schedule and can work evenings and weekends if required
I have reliable transportation to travel to different sites
I am willing to travel for work if necessary
Selected
I applied via Referral and was interviewed in Feb 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Personal Profile
- Q2. Why change required
- Ans.
Change is required to adapt to evolving market trends, improve efficiency, and stay competitive.
Adapt to evolving market trends to meet customer demands
Improve efficiency by implementing new technologies or processes
Stay competitive by staying ahead of competitors and offering innovative solutions
(3 Questions)
- Q1. Self introduction
- Q2. Process related
- Q3. Sops and changes
Interview Preparation Tips
USV Interview FAQs
Tell us how to improve this page.
USV Interviews By Designations
- USV Territory Sales Manager Interview Questions
- USV Technician Interview Questions
- USV Medical Representative Interview Questions
- USV Area Sales Manager Interview Questions
- USV Business Executive Interview Questions
- USV Senior Officer Interview Questions
- USV Assistant Manager Interview Questions
- USV Marketing Executive Interview Questions
- Show more
Interview Questions for Popular Designations
- Mechanical Engineer Interview Questions
- Diploma Mechanical Engineer Interview Questions
- Mechanical Maintenance Engineer Interview Questions
- Senior Engineer Mechanical Interview Questions
- Mechanical Fitter Interview Questions
- Mechanical Maintenance Fitter Interview Questions
- Mechanical Supervisor Interview Questions
- Mechanical Foreman Interview Questions
- Show more
USV Mechanical Technician Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
|
Senior Officer
266
salaries
|  ₹3.2 L/yr - ₹8.6 L/yr |
|
Executive
246
salaries
| ₹3.8 L/yr - ₹10 L/yr |
|
Senior Executive
214
salaries
| ₹4.9 L/yr - ₹12.4 L/yr |
|
Officer
194
salaries
| ₹2.2 L/yr - ₹5.4 L/yr |
|
Assistant Manager
189
salaries
| ₹7.2 L/yr - ₹15 L/yr |
Hetero
Micro Labs
Biological E
Gland Pharma
- Home >
- Interviews >
- USV Interview Questions >
- USV Mechanical Technician Interview Questions
